Showing 1–24 of 29 results
-
Sale!
₹199.00 ₹149.00
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
Add to cart
-
Sale!
₹999.00 ₹749.00
Motor zero speed to maximum motor speed.
Add to cart
-
Sale!
₹299.00 ₹199.00
- This motor speed controller is a 10-60V PWM speed regulator which is an important electronic component of DIY projects.
- The motor speed controller switch produces a power of 1200W and has an operating voltage of DC10-60V.
- The 1200W motor speed controller is integrated with a linear potentiometer which is used as a speed regulation method.
- The PWM speed controller switch uses a barrier terminal block as it’s wiring type and can also be used as a 20A current regulator.
- The speed of the DC motor can be controlled by adjusting the pulse width modulation (PWM) | Maximum Power: 1200W
Add to cart
-
Sale!
₹199.00 ₹149.00
- Speed of a motor is fully adjustable
- DC 6V 12V 24V 28V Supported
Add to cart
-
Sale!
₹299.00 ₹249.00
- Control the speed of a DC motor with this controller.
- High efficiency, high torque, low heat generating.
- With reverse polarity protection, high current protection.
- Control voltage over-voltage protection function
- The overload and short circuit protecting current is 10A
- Working Voltage: DC 12V DC 40V.
- Control Power:0.01 400W.
Add to cart
-
Sale!
₹399.00 ₹299.00
- Adjustable frequency PWM up to about 1.6 KHz.
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate.
- Configurable push-pull or an open-drain output.
- The output enable pin to quickly disable all the outputs.
- Terminal block for power input.
Add to cart
-
Sale!
₹599.00 ₹349.00
- Electric furnace, water heater, lamps, small motor, electric iron etc.
- can apply to the use of new two-way high-power thyristor; As the current up to 40A, a good solution to the heating wire resistance in the case of cooling is too small to cause over-current problems; can easily adjust the electricity.
- The output voltage between 0 220 volts any adjustment for the use of electrical appliances.
- Such as furnace, water heaters, heat transfer, light dimming, small motor speed, electric iron thermostat, and so on.
- So as to achieve dimming, thermostats, pressure effect. Less than 2000 watts of electrical power for large-scale electrical power have been using as much; so the home appliances in general, sufficient, or small factories. (Inductive or capacitive load power should be reduced, the voltage regulator is equipped with the two-way high-power thyristor, potentiometers are with nuts, do not add any components to use, very convenient and practical.)
Add to cart
-
Sale!
₹249.00 ₹199.00
- Mini DC 4.5-35V 5A PWM Motor Speed Controller.
- Wide voltage DC motor speed controller.
- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 90W (max)
- PWM duty cycle: 1% -100%.
Add to cart
-
Sale!
₹599.00 ₹449.00
- Electric furnace,water heater,lamps,small motor,electric iron.etc
- can apply to the use of new two-way high-power thyristor; As the current up to 40A, a good solution to the heating wire resistance in the case of cooling is too small to cause over-current problems; can easily adjust the electricity.
- The output voltage between 0 220 volts any adjustment for the use of electrical appliances.
- Such as furnace, water heaters, heat transfer, light dimming, small motor speed, electric iron thermostat, and so on.
Add to cart
-
Sale!
₹199.00 ₹149.00
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
Add to cart
-
Sale!
₹499.00 ₹449.00
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
Add to cart
-
Sale!
₹299.00 ₹199.00
- This original version of our DRV8825 stepper motor driver carrier has been replaced by a newer version that can more easily be used as a drop-in replacement for our A4988 stepper motor driver carriers.
- This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil.
- 45 V maximum supply voltage.
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates.
Add to cart
-
Sale!
₹299.00 ₹199.00
- Wide Input Power Compatibility: This DC motor speed controller supports an input power range of dc6-28v, ensuring compatibility with various power sources.
- High Performance: With a maximum continuous output current of 3A and a maximum output power of 80W, this controller delivers reliable and powerful performance.
- Convenient Switch Cable: The included switch cable is 15cm/5.9in long, providing flexibility and ease of use in different setups.
- Versatile Control: Equipped with a potentiometer featuring a switch function, this controller offers precise and versatile speed control for your DC motor.
- Compact Design: Measuring at just 3.251.5 cm/1.320.4 inches and weighing only 1.13 ounces, this device boasts a compact and lightweight design, perfect for various applications.
- Complete Package: Your purchase includes 1 x DC motor speed controller, ensuring you have everything you need for efficient motor speed regulation.
Add to cart
-
Sale!
₹199.00 ₹99.00
- Mini PWM DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Super material: It is made of electronic accessories element, inner conductor is pure copper. it is long lasting and durable for you to use.
- DC Motor Governor module. Ultra low voltage dc motor governor, input dc1.8-15v voltage range, applicable current up to 5A, with switch function.
- PWM DC Motor Governor specification: The working voltage is DC3V-35V Maximum output power: 30W. The current in the same product is up to 5A. Potentiometer with switch function.
- Special note: Dc motor governor connected to dc power supply, do not directly connected to household 220V ac, otherwise the damage at your own risk.
Add to cart
-
Sale!
₹249.00 ₹229.00
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Logic Voltage: 5V.
- Micro step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
Add to cart
-
Sale!
₹799.00 ₹399.00
- Using the BTS7960 chip, it has high performance and high reliability;
- Support PWM speed adjustment, you can control the speed of the motor;
- Support positive and reverse control, you can control the direction of the motor;
- It has functions such as overcurrent protection, short -circuit protection and over temperature protection, which can protect the safety of motors and modules;
- Using a large current connector can support high current output.
Add to cart
-
Sale!
₹99.00 ₹49.00
- Overtemperature Protection
- Logical “0” Input Voltage Up To 1.5 V (High Noise Immunity)
- Internal Clamp Diodes.
- Featuring Unit rode L293 and L293D
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
Add to cart
-
Sale!
₹99.00 ₹49.00
- Can control 2 dc motors, their direction using control lines and their speed using pwm
- Compatible with audio, raspberry pi, arm, aver, pic, 8051, etc – can provide bidirectional drive currents of up to 600-ma at voltages from 4 Key Product Features Suggest a change With terminal blocks for connecting motors and power supply and berg sticks for control signals from microcontroller.
Add to cart
-
Sale!
₹99.00 ₹49.00
- Double L9110S chip motor drive.
- Module supply voltage: 2.5-12V.Suitable motor range: The motor working voltage is between 2.5v-12v and the maximum working current is 0.8A. Currently the smart car voltage and current are all within this range.
- It can drive two DC motors or one 4-wire 2-phase stepper motor at the same time.
- PCB size: 2.8cm * 2.1cm ultra-small size, suitable for assembly.
- With a fixed mounting hole, diameter: 3mm.
Add to cart
-
Sale!
₹899.00 ₹799.00
- On-board two L9110 motor control chip
- Module can be driven by two dc motors at the same time or one phase 4 line 2 type stepping motor
- Input voltage: 2.5 to 12 Volt DC
- Each channel has a continuous output current 800 ma
- PCB Size: 29.2 mm x 23 mm
- The maximum operating current of 0.8A
- Ultra-small size, suitable for assembly
- Is provided with a fixed mounting hole
Add to cart
-
Sale!
₹499.00 ₹429.00
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
- 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to each other on 0.1″ header
- “Chain-able” design
Add to cart
-
Sale!
₹99.00 ₹49.00
- Input supply voltage:1.8V-15VDC
- The maximum output power:30W
- The Maximum continuous output current:2A
- Duty Cycle adjustable:0%-100%
- Note: DC motor speed regulator DC power supply, do not be directly connected to household 220V AC
Add to cart
-
Sale!
₹199.00 ₹99.00
- Input supply voltage: 6v28vdc.
- The maximum output power: 80w.
- The maximum continuous output current: 3a.
- Duty cycle adjustable: 5 percent 100 percent.
- Weight: 100 gms.
Add to cart
-
Sale!