Showing 1–24 of 27 results
-
10K NTC Thermistor-1% Stainless Steel 1M Wire B3950
₹299.00₹165.00Add to cart- Probe sheath material: Stainless Steel
- Style: B3950 10K
- Resistance value: 10K ± 1%
- Measurement range: -20 to 105 °C
- Cable Length: 4-meter
- Size of probe: 5 x 25 mm
- Output wires: 2
- Typical Dissipation Constant: 5mW/ °C
- Probe insulation: >100MOhm
-
12V AC DIGITAL TEMP CONTROLLER W3001
₹399.00₹299.00Add to cart- Easy to install
- Output type: Direct Output
- Output capacity: MAX 10Aemperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Upper key: The start temperature is displayed in one press, and long press to set start temperature.
- Lower key: The stop temperature is displayed in one press and long press to set stop temperature.
-
220V Ac Digital Temp Controller W3001A
₹399.00₹299.00Add to cart- Output type: AC Output (AC 220V 1500W).
- Temperature setting upper and lower limits.
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C.
- Temperature Control Range: -50~110°C.
- Control Accuracy: Upton 0.1℃.
-
3 Pin NTC Thermal Thermistor Temperature Sensor Module(AB007B)
₹99.00₹39.00Add to cart- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
-
4PIN NTC Thermal Thermistor Temperature Sensor Module
₹99.00₹31.00Add to cart- Operating voltage (v) : 3.3 ~ 5
- Temperature sense range (C) : -25 ~ +80
- Output Type : Both Analog and Digital
- Voltage Comparator : LM393
-
DHT11 Temperature And Humidity Sensor Module DHT11
₹299.00₹199.00Add to cart- Power Supply: 3.3~5.5V DC
- Output: 4 pin single row
- Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
- Accuracy: Humidity +-5%RH, Temperature +-2℃
- Resolution: Humidity 1%RH, Temperature 1℃
-
DHT22 Temperature and Humidity Module DHT22
₹499.00₹299.00Add to cart- Supply voltage: 5V
- Temperature range:-40-80℃ resolution0.1℃ error <±0.5℃
- Humidity range:0-100%RH resolution0.1%RH error±2%RH
- Sequence of the line:VCC,GND,S
- Size: 38 x 20mm
-
Digital Thermometer Waterproof TPM-10 TPM10
₹199.00₹145.00Add to cart- Temperature range: -50°C ~ +110°C
- Temperature display resolution: ±0.1
- temperature measurement accuracy: 1°C
- Cable Length: 1M
- Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
- The module is powered by a pair of LR44 button batteries (battery included)
-
DS18B20 Digital Temperature Sensor Module DS18B20M
₹199.00₹99.00Add to cart- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
-
DS18B20 Waterproof Digital Thermal Probe 1M AB117
₹199.00₹165.00Add to cart- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moisture proof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
-
Five Channel Flame Sensor Module AB133
₹299.00₹199.00Add to cart1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output analogy signal (voltage signal), can measure signals more accurately, suitable for high precision occasions4. Five-way output all have status indicators, which makes great convenience in debugging or in actual operation.5. Digital output detection distance is adjustable, analog output sensitivity is adjustable, design is more flexible6. Adopts 1% resistor design (the flame sensor on the market is designed with 5% resistor), the signal output is more accurate, suitable for occasions requiring high precision measurement.7. Onboard 3 M3 mounting holes for easy installation8.3.3V-9V power supply, compatible with most single-chip systems9. SMD devices are all fully automatic welded by SMT process, and the quality of military products is trustworthy.10. Applications: All occasions required for flame detection.11. Use Cases: Fire extinguishing robot/Flame alarm -
Flame Sensor Module AB007
₹99.00₹49.00Add to cart- The Flame Sensor Module can detect flames in the 760 – 1100 nanometre wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m.
- Detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
-
Flame Sensor Module Blue 3Pin AB007B
₹99.00₹49.00Add to cart- XL6009 Power Supply Board Module;
- High sensitivity IR receiver, extremely sensitive to wave between 760-1100nm.
- With power supply indicator lamp and comparator output indicator lamp.
- KY-026 Flame Sensor Module is widely used in AO, real-time thermistor voltage signal output and high / low electric level signal output, Analog quantity output.
- 1Pcs x Electronic Module;
-
FY-12 Mini LCD Dig Thermometer Hygrometer 1.5Mtwire HYGT
₹399.00₹199.00Add to cart- This is a mini digital thermometer hygrometer.
- Multifunctional can measure temperature and humidity.
- Large LED display, easy to read.
- High accuracy, large range -50 ~70° C,10% RH ~ 99% RH.
- With reverse wiring protection.
-
FY-12 Mini LCD Dig Thermometer Hygrometer 1.5Mtwire HYGT
₹299.00₹199.00Add to cartLCD display-Size: 48*28.6*15.2mm-LCD size: 35.7*16.8mm-Humidity measurement range 10% to 99%-Humidity display resolution 1%-Humidity sampling period 10 seconds (1 minute)-Humidity measurement accuracy ±5%-Rated voltage DC1.5v (2 AG13 button batteries, not included)-Temperature measurement: -50 to 70 degrees Celsius-Temperature measurement accuracy ± 1 degree (at normal temperature) -
GY-906 MLX90614 Non-Touch Infrared Temperature Sensor Module GY906
₹1,999.00₹999.00Add to cart- Works from 3.3V to 5V input, Module has power regulator IC built in. Standard I2C interface with built 2x pull up resistors
- Operating Voltage: 3V- 5V
- Operating Current: 2mA
- Communication protocol: I2C.
- Sensor working temperature: -40 to +125 Degree C
- Sensing temperature range: -70 to +380 Degree C
- When measuring the tempeature, please maintain a measuring distance of 1 cm
- PCB dimensions 11mm x 17 mm
- Small size, low cost
- Easy to integrate
- Factory calibrated in wide temperature range: -40 to 125 °C for sensor temperature and -70 to 380 °C for object temperature.
- High accuracy of 0.5°C over wide temperature range (0..+50 C for both Ta and To)
- SMBus compatible digital interface for fast temperature readings and building sensor networks
- Customizable PWM output for continuous reading
- Simple adaptation for 8 to 16V applications
- Power saving mode
- Automotive grade
-
K Type Thermistor Sensor Measure 1024 MAX6675
₹499.00₹364.00Add to cart- Model: MAX6675; Operating Voltage: 3.3~5.5VDC; Temperature Range: 0 to +1024°C; Cold Junction Compensation Range: -20 to +80°C
- Resolution: 0.25°C; Internal integrated cold junction compensation circuit;; Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.; K-type temperature probe; Simple SPI serial output temperature
- High impedance differential inputs.; Thermocouple break detection.; 2000V of ESD signal
- Packaged by:- Shari Technologies Pvt. Ltd.; Address:- 09, CK Nagar, AECS layout, Hose Road, Bangalore-560100
-
LM35D Analog Temperature Sensor Module + Cable LM35D
₹299.00₹199.00Add to cart- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
-
LM35DZ ANALOG TEMPERATURE SENSOR LM35DZ
₹199.00₹99.00Add to cart- Sensor type: temperature sensor
- Kind of temperature sensor: analog, with voltage output
- Calibrated directly in: °Celsius (Centigrade)
- Temperature measuring range: 0…100°C
- Scale factor: Linear 10.0 mV/°C
- Case: TO92
-
STC-1000 Temperature Controller 220VAC S1000A
₹799.00₹599.00Add to cart- Input Operating Voltage: AC 220V
- Temperature Measuring Range: -50 to 90°C
- Output Relay Capacity : Heating: 10A/220VAC; Cooling: 10A/220VAC
- Sensor Type: NTC Sensor
-
STC-3028 Temperature & Humidity Controller 220VAC
₹299.00Add to cart- ABS flame retardant plastic shell, safer to use.
- Microcomputer intelligent digital display thermostat, dual display dual temperature.
- With a Dual NTC Sensor for convenient usage, the line length is about 1 meter.
- The large and clear digital display shows measuring temperature, high accuracy of temperature measuring, and controlling.
- Suitable for automatic switching of refrigeration and heating devices such as seafood machines and cooling water machines.
- Switch the modes between cool and heat;
- Control temperature by setting the temperature value and the difference value;
- Temperature calibration;
- Refrigerating control output delay protection;
- Alarm when the temperature exceeds the temperature limit or when sensor error.
- Temperature measuring range: 0~100ºC Celsius
- Measuring humidity range: 00%RH~+100%RH
- Accuracy: 0.1ºC Celsius
- Power supply: 24Vdc
- Sensor: NTC sensor
- Relay contact capacity: Cool (10A/240VAC); Heat (10A/240VAC)
- Sensor length: 1 meter (including the probe)
- Shell material: PC and ABS
-
STC-3028 Temperature & Humidity Controller 12VDC S3028
₹2,999.00₹1,599.00Add to cart- Dual display for temperature and humidity readings
- Can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- Can switch between cool and heat modes
- Has a temperature calibration feature
- Powered by AC 110-220V
- Has a 10A relay
- Comes with a sensor probe
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators
-
Temperature Controller Module Sensor Dc 12V W1219
₹499.00₹399.00Add to cart- Operating Voltage: 12V:LED display in red and green.
- Control Range: -50~110 °C Control Precision: 0.1 °C
- Measuring Input: NTC10K waterproof sensor L=0.5m.
- High-Temperature Alarm: -49~110 °C
- Packer / ImporterSHARVI TECHNOLOGIES (OPC) PRIVATE LIMITED #9, 1st CR, Hossa Road, C.K, Bangalore-560100, Karnataka, India
-
W1209 Dc 12V Temperature Control Module W1209
₹299.00₹199.00Add to cart- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
