Showing all 20 results
-
12V 3A Single Mirror touch Switch with Dimmer Operate Single Led Strip
₹499.00₹182.00- LED can be made ON-OFF just by a single touch.
- Sensitive to touch
- Lighting control
- LED’s intensity can be altered.
- Easy to connect with LED.
-
5-24V LED Light Touch Switch Dimming Module TOUCHM
₹199.00₹99.00- It can replace the mechanical touch button
- The module can realize the touch switch control and brightness adjustment of the LED light. The mechanism of the module is simple and the operation is convenient.
- The design circuit of the module can automatically overcome all kinds of interfaces caused by ambient temperature, humidity, surface sundries and avoid key differences caused by resistance and capacitance error.
- . It is the perfect choice for your product development and upgrading.
-
CJMCU 9930 APDS-9930 Close & Non- Contact Gesture Detection and Attitude Sensors
₹199.00₹129.00- Working voltage:2.8-3.8V
- ALS, IR LED and Proximity Detector in an Optical Module;
- Ambient Light Sensing (ALS);
- Approximates Human Eye Response;
- Programmable Interrupt Function with Upper and Lower Threshold;
- Up to 16-Bit Resolution;
- High Sensitivity Operates Behind Darkened Glass;
- Low Lux Performance at 0.01 lux;
-
Close & Non-Contact Gesture Detection and Attitude Sensor APDS-9930
₹299.00₹199.00- CJMCU- proximity and contactless gesture detection RGB and Gesture Sensor APDS-9930
- The proximity sensor can be adjusted through the full 100 mm object detection, eliminating the terminal equipment and sub-assembly factory calibration requirements.
- From bright sunlight to dark rooms, proximity detection feature can work well.
- Module was added to provide micro-optic lenses infrared energy efficient transmission and reception, can reduce the overall power consumption.
- In addition, the internal state machine allows the device to enter a low-power mode, bringing the average power consumption low.
- Integrated ALS, an infrared LED and an optical proximity detector module
-
Digital Sensor TTP223B Module Capacitive Touch Switch
₹99.00₹30.00- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
-
Fingerprint Identification Module
₹2,999.00₹1,999.00- Integrated image collecting and algorithm chip together, ALL-in-One.
- The fingerprint reader can conduct secondary development, can be embedded into a variety of end products.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing techniques.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
- Comes with Matching mode (1: 1) and Search mode (1: N)
-
Fingerprint Sensor R307
₹1,999.00₹999.00- Integrated image collecting and algorithm chip together, ALL-in-One.
- The fingerprint reader can conduct secondary development, can be embedded into a variety of end products.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing techniques.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
-
Fingerprint Sensor Original R3070
- Operating voltage (v): 4.2 ~ 6 VDC
- Current consumption: ≤75mA
- Verification Speed: 0.2 sec
- Scanning Speed: 0.3 sec
- Character file size: 256 bytes
- Template size:512 bytes
- False Acceptance Rate (FAR): ≤0.0001%
- False Rejection Rate (FRR): ≤0.1%
- Resolution: 500 DPI
- Operating Temperature:-20 ~ +50 °C
- L*W*H: 46*21*23.5(MM)
- Weight: 20(g)
-
HC-SR505 Mini Sensing Infrared PIR Motion Detector Sensor Module
₹199.00₹99.00- Automatic induction: to enter the sensing range
- Ultra-small size.
- Repeatable trigger
- Wide operating voltage range
- Micropower: quiescent current <50
- Output high signal: easy docking and all kinds of circuits.
-
Infrared Obstacle Avoidance Sensor Module FRQ & ADJ
₹199.00₹99.00- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
-
MPR121 Breakout V12 Capacitive Touch Sensor Controller Module
₹149.00₹79.00- Connection Interface: I2C.
- Operating Voltage: 2.5-3.6 VDC
- Application: Capacitive Touch Sensor Controller
- Number of touch inputs:12
-
MRP121 Breakout V12 Capacitive Touch Sensor MPR121
₹199.00₹99.00- Capacitive touch sensor controller driven by an I2C interface.
- Can control up to twelve individual electrodes, as well as a simulated thirteenth electrode.
- Eight LED driving pins.
- Connection to the microcontroller /microprocessor via I2C bus.
-
Single Touch sensor switch for mirror light 12V DC ZY-02
₹699.00₹399.001. On the mercury side of the mirror sand beating Or use the laser to carve out the icon of the switch button.
2. Remove the 3M sticker on the back of the bracket to facilitate the next step of pasting fixing installation.
3. Take the icon of the switch button as the centre, and stick the touch switch to the icon of the button.
4. After installation, touch the switch to power on, and the mirror can see the backlight icon. -
TTP223 Capacitive Touch Module TP223C
₹50.00₹25.00- Supports momentary or latching/toggle modes.
- Supports Active High or Active Low output signal modes.
- Dimensions : 15mm x 11mm.
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Have two kinds of sampling length by pad option(SLRFTB pin).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides Fast mode and Low Power mode selection by pad option(LPMB pin).
- Provides direct mode toggle mode by pad option(TOG pin).
- Open drain mode by bonding option, OPDO pin is open drain output, Q pin is CMOS output.
- All output modes can be selected active high or active low by pad option(AHLB pin).
- Have the maximum on time 100sec by pad option(MOTB pin).
- Have external power-on reset pin(RST pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration.
- Re-calibration period is about 4.0 sec when the key has not be touched.
-
TTP223B Capacitive Touch Sensor Module TP223B
₹99.00₹39.001 Channel Capacitive Touch Sesnor Module uses the touch-sensing IC TTP223 to sense the touch input thus making it easy to add capacitive touch input to your project. The touching detection IC is designed for replacing traditional direct button key with diverse pad size. The module has single touch pad. Power the module with 2 ~ 5.5V DC and the touch pad is all active to sense the input.
Single Channel Capacitive Touch Sensor Module is easy to interface. It can be used along with a microcontroller or an Arduino or even without one. When a capacitive load (such as a human hand) is in close proximity to the sense-pad, the sensor detects the change in capacitance and activates the switch. Custom sense-pads can be made from nearly any conductive material and these sensors can detect touch through thin layers of non-conductive materials such as glass, plastic, fabric or even wood.
In the normal state, the module output is low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
Jog type : the initial state is low , high touch , do not touch is low ( similar touch of a button feature )
Module can be installed in such as surface plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons