Showing all 16 results
-
12F ESP8266 Serial WIFI Module ESP12F
₹299.00₹210.00- Operating Voltage: 3.0-3.6V
- 3DBi PCB-on-board antenna
- Operating Current: 80mA
- Low power 32-bit CPU, can also serve as the application processor
- Up to 160MHz clock speed
-
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266
₹399.00₹199.00- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% increase in radiating area
- Good stability.
-
ENC28J60 Ethernet Module
₹799.00₹599.00- ENC28J60 Ethernet Module
- HanRun HR911105A Ethernet port
- 5V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
-
ENCJ28J60 Ethernet Module E28J60
₹699.00₹499.00- Brand new and high quality.
- chip board ENC28J60-I/SO.
- the board 25MHZ crystal.
- the network interface board HR911105A.
- 3.3 V power supply pin.
- Size:5.9cm x 3.5cm – 2.32inch x 1.38inch.
-
ESP-01 ESP8266 Serial WIFI Transceiver Module
₹299.00₹199.00- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- 1MB Flash Memory
- Dimensions: 25 x 15 x 11 mm (LxWxH)
- PCB Thickness: 1mm
-
ESP-12E ESP8266 Serial WiFi Module
₹299.00₹199.00- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
-
ESP-12F ESP8266 Wifi Wireless Module
₹199.00₹149.00- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- Compatible with ESP-12(ESP-202)
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to develop projects with AT commands
- Surface Mount Package with 2mm Pitch Pads
-
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port
₹499.00₹299.00- Quad-band 850/900/1800/1900MHz – connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).
- Make and receive voice calls using a headset or an external 8Ω speaker and electret microphone.
- PWM/Buzzer vibration motor control
- AT command interface with “auto baud” detection
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.).
- Scan and receive FM radio broadcasts.
- Lead out buzzer and vibration motor control port.
-
SIM800L V2.0 5V Wireless GSM GPRS Module Quad-Band with Antenna
₹999.00₹649.00- Network support: Quad-Band 850/900/1800/1900 MHz works on GSMnetworks in all countries across the world.
- TTL serial interface compatible with 3.3V and 5V MCU
- The small size is suitable for all kinds of sleeve belt type and embedded.
- Playing card slot, convenient change mobile phone card.Can side reserve replacement cell phone bayonet into the box.
- Using the IPX interface can arbitrarily change the antenna. The default PCB antenna greatly reduces: use the space.
- the board with gold plated board, more stable performance.
- When wiring neat guarantee board running more stable.
- This module adds a protection device, which can realize the prevention, high pressure, reduce the loss of the board, suitable for the project and learn.
-
SIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board
₹999.00₹899.00- SIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board with Antenna is based on SIM900A chip having onboard two set power of supply interface namely VCC5 5V power supply, VCC4 interface, 3.5–4.5V power supply, optional power on self-starting (default), and control start.
- The onboard SMA (default) and IPXmini antenna interface, SIM900A interface reserved reset.
- The computer can give early computer debugging USB module power supply, a very large amount of data under the condition of the recommended current more than 1A.
-
Sip To Ethernet TCP/IP Network Module Mini W5500M
₹699.00₹499.001. 80MHz high-speed SPI interface2. Built-in hardware TCPIP protocol stack, users need almost no knowledge of complex network protocols3. Support up to 8 Socket connections4. Support TCP, UDP, ICMP, IPv4, ARP, IGMP, Pepo protocol5. Integrated data link layer, physical layer6. Support power-down wake up7. Support high-speed serial peripheral interface (SPI mode 0~3)8. Internal 32K byte send and receive buffer9. Embedded 10BaseT/100BaseTX Ethernet Physical Layer (PHY)10. Support auto-negotiation (10/100-Based full/half-duplex)11. IP fragmentation is not supported12. 3.3V working voltage, I/O signal port 5V withstand voltage13. LED status display (full-duplex / half-duplex, network connection, network speed, active status)14. Ultra-small pin package for easily embedded applications15. Provide C application routines -
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
₹1,499.00₹799.00- 10BaseT/100BaseTX Ethernet PHY embedded.
- Supports automatic response (full duplex/half duplex mode).
- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tx/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- SPI interface (SPI MODE 0, 3), convenient connection with MCU.
-
USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip
₹299.00₹149.00- Using CH340 turns serial port chip for stable performance and compatibility.
- Supports all basic windows versions.
- The adapter plate integrated 1000F solid capacitors to ensure the current supply
- The power supply will not be a problem to make WIFI module crashes unresponsive.
- Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
- The interposer board is specifically designed for ESP8266 The USB Turn serial port.
-
USB-UART/ESP8266 Adapter Program. WIFI Module ESP01A
₹399.00₹199.00- Driver Chip: CH340G
- Supports all basic windows versions.
- The adapter plate integrated 1000μF solid capacitors to ensure the current supply
- The power supply will not be a problem to make WIFI module crashes unresponsive.
- Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
-
W5500*SPI To Ethernet TCP/IP Network Module W5500
₹599.00₹399.00- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tax/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- Factory and Building Automation
- Medical Monitoring Equipment