Showing 25–48 of 74 results
-
Sale!
₹299.00 ₹259.00
- Work Voltage:DC 4.5V~5.0V
- Work Power:2W
- Work Frequency:108KHz(+/-3KHz)
- Come with a driver
- Power-ON trigger work
- 108KHz high frequency oscillator
Add to cart
-
Sale!
₹49.00 ₹39.00
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
Add to cart
-
Sale!
₹199.00 ₹99.00
- The use of plug-in full-colour LED.
- RGB trichromatic limiting resistor to prevent burnout.
- With a variety of single-chip interface.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors
- The working voltage: 5V
Add to cart
-
Sale!
₹199.00 ₹99.00
- Module Working Voltage: 4.5-5.5V
- Launch Tube Pressure Drop: VT=1.6V
- Launch Tube Current: If<20mA
- Signal output: A, B two lines; TT power level;
- Resolution: 0.01mm
Add to cart
-
Sale!
₹99.00 ₹59.00
- Open reed switch
- Working voltage: 3.3V ~ 5V
- Current: Upto 1.2A
- Comparator output, clean signal, great waveform, and strong driving ability
- Digital switch output (0 and 1)
- Fixed bolt hole for easy installation
Add to cart
-
Sale!
₹2,299.00 ₹1,899.00
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as the ARM test development board.
- Can be secondary development on the basis of this kit, for example, it can be changed to Milli voltmeter, data loggers.
- Adjustable vertical displacement, and with instructions.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Observable previous trigger waveform (negative delay).
- Can freeze at any time waveform display (the HOLD function).
- Comes 1Hz /3.3V square wave test signal source.
Add to cart
-
Sale!
₹229.00 ₹199.00
- Analog acquisition, press the different buttons of different voltage output.
- Port compatible sensor expansion board.
- Output high level when pressed, release to keep low level.
- Product Size: Total Length: 60 x 20mm/ 2.36 x 0.78inch
- Single Module Size : 20 x 12mm/0.78 x 0.47in
Add to cart
-
Sale!
₹699.00 ₹399.00
- Angle Displacement Measurement.,
- Bends and Flexes physically with the motion device.
- Flex length5.6 cm, Total Length2.2″ (7 cm)
- Operating voltage: 0-5V
Add to cart
-
Sale!
₹699.00 ₹499.00
- Flex length: 5.6 cm.
- Total Length: 2.2″ (7 cm).
- Life Cycle : >1 million.
- Height : 0.43mm (0.017″),
- Flat Resistance: 10K Ohms ±30%.
- Power Rating: 0.5 Watts.
Add to cart
-
Sale!
₹99.00 ₹49.00
- Widely used for various electrical projects.
- Light weight, small size, easy to carry.
- Easy install & no driver needed.
Add to cart
-
Sale!
₹199.00 ₹169.00
- High precision determination accurate to 1 Lu for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
Add to cart
-
Sale!
₹99.00 ₹39.00
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40°C to 85°C.
- Turn on and Turn off time is 2 μsec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.
Add to cart
-
Sale!
₹249.00 ₹199.00
- Working voltage: 4.5V to 5.5 V.
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Signal output: A, B two way; The TTL level
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 KHZ
- Encoder diameter: 24 mm
- Encoder type D hole diameter: 4 mm
- The encoder resolution: 20 line
Add to cart
-
Sale!
₹599.00 ₹499.00
- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
Add to cart
-
Sale!
₹299.00 ₹249.00
- EYE BLINK indication by LED
- Instant output digital signal for directly Connecting to Microcontroller
- Compact Size, Working Voltage +5V DC, TTL output 5V or 0V
- Great Quality, Easy to Use
Add to cart
-
Sale!
₹149.00 ₹59.00
- VCC: The positive 3.3-5 v power supply.
- GND: Connect power negative.
- DO: TTL switch signal output.
- AO: This is analog output.
Add to cart
-
Sale!
₹119.00 ₹79.00
- Used for DIY or robots
- Used for all kinds of level meters
- Part of Spectroscopy
- In laser test tools
- In medical equipment positioning
- Production of signal equipment
Add to cart
-
Sale!
₹99.00 ₹39.00
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
Add to cart
-
Sale!
₹49.00 ₹29.00
- It requires less power to operate
- Quick Response
- Easy to use
- Generate high current
Add to cart
-
Sale!
₹120.00 ₹59.00
- S49E hall sensor
- Features wide-range voltage comparator LM393
- Signal output indicator
- Analog / Digital output
Add to cart
-
Sale!
₹99.00 ₹59.00
- Operating Voltage: 3.3V-5V
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator with the retaining bolt hole, convenient installation
- Output form digital switch output (0 and 1 high and low level)
- The output effective signal is low level
- When there is sound, outputs low level and the signal light
Add to cart
-
Sale!
₹249.00 ₹149.00
- Operating Voltage: 3.3V to 5V
- Diameter: 4mm
- Length: 35mm
- Output Format: digital switching outputs (0 and 1)
Add to cart
-
Sale!
₹99.00 ₹49.00
- Communication interface is a standard SPI interface.
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board.
- Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal.
- A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin.
Add to cart
-
Sale!
₹99.00 ₹69.00
- Power Supply: 4.5V – 5.5V, 3.3V
- Positioning Holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Add to cart