Showing 49–72 of 73 results
-
Mini Micro SD Card Reader Module
₹129.00₹99.00- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
- Maximum voice storage: 512 voice
- Operating voltage: DC 2.6 to 3.6V
- Quiescent current: 16 A (SD card is not inserted
-
Peacefiar Pzem-004T Ac Elec Energy Power Monitor P004T
₹1,999.00₹999.00- Electrical parameter measurement function (voltage, current, active power, power).
- The power button clear function.
- Power-down data storage function (cumulative power down before saving). PC PC display function (display voltage, current, active power, power).
- Model: PZEM-004T Accuracy: 1
- Operating Voltage (VDC): 80-260V (AC Test Voltage: 80-260V (AC)
-
Peacefiar PZEM-004T AC Multi-function Electric Energy Metering Power Monitor
₹999.00₹799.00- Model: PZEM-004T
- Operating Voltage: 80-260VAC
- Test Voltage: 80-260VAC
- Rated Current: 100A
- Rated power: 100A / 22000W
- Operating frequency: 45-65Hz
- Measurement accuracy: 1.0
-
Photo Sensitive Resistance 5MM LDR
₹9.00₹5.00- Epoxy encapsulation
- Good reliability
- Small size
- High sensitivity
- Fast response
- Good spectral characteristics
-
PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board
₹349.00₹299.00The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation.
-
PICKIT3 Debugger Programmer Emulator Controller Development Board
₹2,999.00₹2,799.00- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
-
PS2 GAME JOYSTICK MODULE AB001
₹99.00₹49.00- Two analogue outputs, all the way to digital output.
- High-quality rocker, long life, stable performance.
- For two degrees of freedom servo PTZ control or other remote proportional control.
- X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle.
- Like the next press the joystick, you can move all the way to touch the authority for the digital output, has been pulled.
-
PS2 Joystick Module Breakout Sensor
₹99.00₹79.00- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
-
Range Current Sensor 20A ACS712B
₹199.00₹149.00- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
-
Range Current Sensor 30A ACS712C
₹299.00₹199.00- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
-
Range Current Sensor 5A ACS712
₹199.00₹149.00- Working Voltage 5V
- Material PCB + metal
- This ACS721 current module is based on ACS712 sensor, which can accurately detect AC or DC current
- Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc.
-
Reed Magnetic Switch Sensor Module
₹99.00₹59.00- Open reed switch
- Working voltage: 3.3V ~ 5V
- Current: Upto 1.2A
- Comparator output, clean signal, great waveform, and strong driving ability
- Digital switch output (0 and 1)
- Fixed bolt hole for easy installation
-
SRP Correlation Photoelectric Infrared Count Slot Sensor Module 5 mm
₹99.00₹59.00- The width of the optical coupling slot: 5mm
- With a signal output indication.
- Single signal output
- The circuit board output switch!
- The output valid signal is low.
-
ST-Link-V2 Programming Unit Mini STM8 STM32 Downloader With Protective Case
₹399.00₹299.00- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
-
SW420 Vibration Sensor Module SW420
₹99.00₹59.00- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
SW520D Tilt Sensor Module Board (Vibration Sensor)
₹99.00₹69.00- Small size, simple to use and easy installation
- Digital output
- Long lifeline
- LED indication when the switch is on
- Can work on low voltage
- Easy interface with Arduino and other controllers
-
TCS3200 Color Recognition Sensor Module for MCU Arduino
₹1,099.00₹999.00- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
-
The Knock Sensor Module
₹99.00₹45.00- Detect shocks with the spring and send a signal to Controller Board
- Operating voltage: 3.3V-5V
- Digital output
- Bolt holes for easy installation.
-
Tilt Switch Sensor Module For Arduino
₹99.00₹49.00- Operating Voltage: 5v DC.
- This module is Small and Simple to use.
- Digital switch output (0 & 1)
- High sensitivity
- Completes the circuit when the module is tilted
- LED lights up when tilt switch is activated
-
USB ASP AVR Programmer for ATMEL Processors With Cable
₹329.00₹289.00- Compatible Chips:
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
- Compatible Chips:
-
Voltage Detection Sensor Module 25V (AA118)
₹99.00₹49.00- Input Voltage: 0 to 25V
- Voltage Detection Range: 0.02445 to 25
- Analog Voltage Resolution: 0.00489V
- Needs no external components
- Easy to use with Microcontrollers
-
WCS1800 Current Sensor (W1800)
₹1,999.00₹599.00- The current detection resolution of 32mV / A
- Output overcurrent signal indication
- Overcurrent signal is set critical point adjustable settings Resolution 3A
- With mounting holes for easy firmware installation
- Sampling current converting analog signal output, which can be accessed ADC, TTL level signal output, which can be accessed microcontroller IO port control.
- The output signal is the signal level of the analog signal.
- Maximum detection current selectable: 2A / 5A / 7.5A / 20A / 30A / 35A / 60A / 75A / 100A / 150A / 200A.
-
X9C103S DC 3-5V Digital Potentiometer Board Module for Arduino(X9C103)
₹499.00₹199.00- 10K span potentiometer.
- Potentiometer center tap between the 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)
- VL and VH digital potentiometer sliding rheostat port corresponding to the low-end and high-end, allowing the input voltage range -5V to + 5V.