Showing all 22 results
-
ADK USB Host Shield For Arduino AUSBS
₹999.00₹599.00Add to cart- USB Host Shield support the Google Android ADK and Android Phone: G1, Nexus One, Nexus S, Motorola Droid X. (Note:Mobile phone system needs to upgrade Android 2.3.4, Tablet PC needs to upgrade to Android 3.1).
- Compatible with following hardware: for Arduino Mega 2560 (Recommended); for Arduino Mega 1280; for Arduino Uno 328; for Arduino Diecimila / Duemilanove 328.
- When achieves the USB HOST function, USB Host Shield can communicate with other USB devices, support USB HUB function as well.
- The USB power pin have the 3.3Vin and 5Vin pins, which needs to be soldered for the shield to work.
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
-
ARDUINO LILY PAD 328 AT MEGA328P BOARD 16M LILYP
₹1,299.00₹499.00Add to cartArduino LilyPad 328 is a wearable microcontroller board based on the ATmega328P, running at 16MHz. Designed for e-textiles and wearable projects
-
Arduino NANO V3.0 Development Board – Clone Compatible Model(Soldered)
₹599.00₹299.00Add to cart- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
-
Arduino NANO V3.0 Development Board Unsoldered
₹899.00₹699.00Add to cart- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX) and orange (L) LED.
- +5V to AREF jumper.
- Auto sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
ARDUINO SENSOR SHIELD V-5 ASENS
₹199.00₹99.00Add to cart- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
-
ARDUINO UNO NANO V30 ANANO
₹399.00₹249.00Add to cartA compact, breadboard-friendly microcontroller board based on the ATmega328P. Offers full Arduino UNO functionality in a smaller form, ideal for space-constrained DIY, robotics, and embedded projects.
-
ARDUINO UNO R3 DIP UNOR3
₹999.00₹549.00Add to cartMicrocontroller: ATmega328P Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 14 (6 PWM outputs) Analog Input Pins: 6 DC Current per I/O Pin: 20 mA SRAM: 2 KB EEPROM: 1 KB Clock Speed: 16 MHz Dimensions: 68.6 mm x 53.4 mm Weight: Approximately 25g Communication Interface: USB, UART (TTL Serial Communication)
-
ARDUINO UNO R3 SMD UNOSM
₹699.00₹299.00Add to cartA compact version of the classic UNO board featuring an SMD ATmega328P microcontroller. Fully compatible with the Arduino IDE, it’s ideal for DIY electronics, robotics, and prototyping.
-
AURDUINO UNO NANO V30 SOLDERED NANOS
₹499.00₹239.00Add to cartA compact, breadboard-friendly microcontroller based on the ATmega328P, featuring pre-soldered headers for easy plug-and-play use. Perfect for quick prototyping, DIY electronics, and embedded projects.
-
Blue Nano Io Shield V1.0 Expansion Board NA005E
₹199.00₹107.00Add to cart- Type: Voltage Regulator
- Supply Voltage: 3 – 5V
- Compatible with Arduino NANO
- All digital and analogue pins breakout
- Compact size
- Leads all pins out, convenient for wiring and doing experiments.
-
CNC SHIELD V3 ENGRAVING MACHINE CNCV3
₹199.00₹139.00Add to cart- The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
- This shield allows you to control upto 4 stepper motors
- Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
- Arduino compatible
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Supports PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- Supports Coolant enable
- Supports removable A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Uses removable A4988 or DRV8825 compatible stepping driver.
-
DTH Power Supply Circuit Board for Free to Air D2H DTH Set Top Box Satellite
₹299.00₹159.00Add to cart- Input : 220 V AC
- Switch Mode Circuit(SMPS) – No transformer
- Output : DC voltage via 6 pin header(+33V, Gnd, +12V, +24V, Gnd
- This power supply board is compatible with most common brands
-
Motor Driver Shield Expansion Board L293D
₹449.00₹229.00Add to cartWith built-in H-Bridge drivers, it allows precise speed and direction control, making it perfect for robotics, automation, and DIY electronics projects.
-
NANO ADAPTER BREAKOUT BOARD IO SHIELD NA005
₹399.00₹199.00Add to cartNano Adapter Breakout Board / I/O Shield – Compact expansion board for Arduino Nano, providing easy access to all digital, analog, and power pins.
-
Pro Mini 5V 16MHz ATMEGA328P Compatible Board with Arduino
₹1,399.00₹899.00Add to cart- Based on the ATmega328P microcontroller (same as Arduino Uno)
- Operates at 5V with a 16MHz clock speed
- Compact and lightweight design (33mm x 18mm)
- 14 digital I/O pins (6 support PWM output)
- 8 analog input pins for sensors and analog devices
- Preloaded with Arduino bootloader
- Ideal for DIY electronics, wearables, robotics, and IoT projects
- Low power consumption – great for battery-powered applications
-
QBM ARDUINO OPEN SOURCE BOARDS ARDUINO MICRO
₹1,999.00₹1,599.00Add to cartModel Type Arduino Micro Color Blue Microcontroller ATmega32U4 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Analog I/O Pins 12 Digital I/O Pins 20 PWM Output Pins 7 Architecture AVR Clock Speed 12 MHz DC Current per I/O Pin (mA) 20 Flash Memory 32 KB EEPROM 1 KB (ATmega32U4) SRAM (KB) 2.5 Weight (gm) 13 Length (mm) 48 Width (mm) 18 Height (mm) 8 -
QBM ARDUINO OPEN SOURCE BOARDS ARDUINO NANO
₹1,199.00₹899.00Add to cart- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
-
QBM Mega 2560 R3 Board – Compatible Model High Quality
₹2,199.00₹1,799.00Add to cart- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01i
- QBM
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
-
RAMPS 1.4 BOARD FOR 2560 RAMP
₹499.00₹299.00Add to cartA powerful shield for 3D printers and CNC machines, designed to stack on an Arduino Mega 2560. Supports stepper drivers, heaters, sensors, and LCDs—ideal for RepRap and DIY motion control projects.
-
UNO PROTOTYPE SHIELD + 170PTS BREADBOARD ABREAD
₹199.00₹110.00Add to cartA compact prototyping solution for Arduino UNO with a solderable shield and detachable 170-point mini breadboard. Perfect for testing, building, and expanding your Arduino projects with ease.
-
UNO R3 TFT SCREEN ADAPTER ZA010
₹499.00₹349.00Add to cartA plug-and-play shield that connects 2.4″ TFT LCD displays to Arduino UNO R3 boards. Simplifies wiring and enables easy development of graphical interfaces and display projects.
-
WEMOS D1 R2 AB143 WMOD1
₹599.00₹349.00Add to cartThe WEMOS D1 R2 AB143 is a Wi-Fi development board based on the powerful ESP8266EX microcontroller, designed in the popular Arduino UNO form factor.
