Showing 726–750 of 2487 results
-
9V Battery Snap with DC Jack BASN
₹79.00₹49.00Add to cart- Supply voltage (V):9
- DC jack Size (mm):2.1
- Length of Cable (cm):10
- Length (mm):160
- Width (mm):26
- Height (mm):9
- Weight (gm):7
- Cable Length (cm):10
-
9V CELL HOLDER WITH ON/OFF BH9V (Pack of 2)
₹149.00₹99.00Add to cart9V battery holder featuring a built-in ON/OFF switch and pre-attached wires for easy connection. Ideal for powering DIY electronics, Arduino projects, and portable circuits
-
9V HI-Watt Battery
₹50.00₹39.00Add to cart- The 9V battery connector snap is used to connect a 9V battery to any required application
- Metal jacket body and good built quality
- Leakproof, easy to install and non rechargeable
- Corrosion free connector point for long term use
- OEM compatible connector clip made of hard leather and excellent material
-
9V-12V MINI TESLA COIL KIT FOR DIY PROTOTYPING TESLA
₹299.00₹199.00Add to cartThe 9V-12V Mini Tesla Coil Kit is a compact DIY electronics project designed to demonstrate wireless power transmission and high-voltage generation. Ideal for students and hobbyists, it produces stunning electric arcs and can wirelessly light small bulbs, making
-
9Volt 1 Amp Adapter AD91
₹210.00₹103.00Add to cart- Input – 100-240 VAC 50/60Hz
- Output – 9Volts 1Amp
- No Minimum Load
- Short Circuit, Over Voltage & Over Current Protection
- High Efficiency & low energy consumption
-
9Volt 2 Amp Adapter AD92
₹220.00₹136.00Add to cart- Input: 100V-240V 50/60Hz; output: 9V DC, 2A max; Works with device that draws less than 2A, such as 100ma 300ma 450ma 500ma 600ma 650ma 700ma 800ma 900ma 1000ma 2000ma.
- DC plug connector external diameter is 5.5mm, internal diameter is 2.1~2.5mm. Comes with a female DC barrel connector. You can easily screw wires on it without soldering.
- Safety protection: automatically overload cut-off, over voltage cut-off, over temperature cut-off, short-circuit cut-off.
- Sufficient 18W output power and stable 9V output voltage will protect your electronic devices from destruction.
- It is perfect for 9V devices less than 9W, such as LED light strip, CCTV camera security system, Bluetooth speaker, keyboard, TV boxes, webcam router etc.
-
A2212 1000KV BLDC Brushless DC Motor for Drone MOTBL1
₹1,299.00₹449.00Add to cart- Type: Brushless DC Motor (BLDC)
- KV Rating: 1000 KV for a balanced thrust-to-efficiency ratio
- Operating Voltage: Compatible with 3S to 4S LiPo (11.1V to 14.8V)
- Max Current: 30A for reliable power delivery
- Max Power Output: 400W for robust thrust capabilities
- Weight: Lightweight at 120 grams for improved agility
- Dimensions: 28 mm x 30 mm (diameter x length)
- Shaft Diameter: 3.17 mm (1/8 inch) for standard propeller fitting
- Durable Construction: High-quality materials ensure long-lasting performance
- Versatile Application: Suitable for racing, FPV drones, and multi-rotor setups
- Recommended Propeller Size: 10 to 12 inches for optimal performance
- Easy Installation: Standard mounting design for straightforward integration
-
A2212 14000KV BLDC Brushless DC Motor for Drone MOTBL14
₹1,369.00₹499.00Add to cart- Type: Brushless DC Motor (BLDC)
- KV Rating: 1400 KV for balanced thrust and efficiency
- Operating Voltage: Compatible with 3S to 4S LiPo (11.1V to 14.8V)
- Max Current: 30A for dependable performance
- Max Power Output: 400W for strong thrust capabilities
- Weight: Lightweight at 120 grams for optimal agility
- Dimensions: 28 mm x 30 mm (diameter x length)
- Shaft Diameter: 3.17 mm (1/8 inch) for standard propeller fitting
- Durable Construction: High-quality materials for long-lasting reliability
- Versatile Application: Suitable for racing, aerial photography, and multi-rotor drones
- Recommended Propeller Size: 9 to 10 inches for optimal performance
- Easy Installation: Standard mounting design for straightforward integration
-
A2212 1800KV BLDC Brushless DC Motor for Drone MOTBL18
₹1,259.00₹499.00Add to cart- Type: Brushless DC Motor (BLDC)
- KV Rating: 1800 KV for high torque and rapid acceleration
- Operating Voltage: Compatible with 3S to 4S LiPo (11.1V to 14.8V)
- Max Current: 30A for robust power delivery
- Max Power Output: 400W for enhanced thrust performance
- Weight: Lightweight at 120 grams for agile flight
- Dimensions: 28 mm x 30 mm (diameter x length)
- Shaft Diameter: 3.17 mm (1/8 inch) for standard propeller fitting
- Durable Construction: High-quality materials for long-lasting reliability
- Versatile Application: Ideal for racing drones, FPV drones, and multi-rotor setups
- Recommended Propeller Size: 8 to 10 inches for optimal performance
- Easy Installation: Standard mounting design for straightforward integration
-
A2212 22000KV BLDC Brushless DC Motor for Drone MOTBL22
₹1,259.00₹499.00Add to cart- Type: Brushless DC Motor (BLDC)
- KV Rating: 2200 KV for high RPM and rapid acceleration
- Operating Voltage: Compatible with 3S to 4S LiPo (11.1V to 14.8V)
- Max Current: 30A for robust power delivery
- Max Power Output: 400W for enhanced thrust performance
- Weight: Lightweight at 120 grams for easy integration
- Dimensions: 28 mm x 30 mm (diameter x length)
- Shaft Diameter: 3.17 mm (1/8 inch) for standard propeller fitting
- Durable Construction: Made from high-quality materials for long-lasting use
- Versatile Application: Ideal for racing drones, aerial photography, and custom builds
- Recommended Propeller Size: 8 to 10 inches for optimal performance
- Easy Installation: Standard mounting design for straightforward setup
-
A3144 Hall Effect Sensor Module
₹99.00₹49.00Add to cart- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
-
AA-1 CELL HOLDER OPEN WITH WIRE BHAA1 (Pack of 2)
₹199.00₹99.00Add to cartCompact open-frame holder for a single AA battery with pre-soldered wire leads. Ideal for DIY electronics, low-power circuits, and educational projects requiring 1.5V DC power.
-
AA-2 CELL HOLDER OPEN WITH WIRE BHAA2 (Pack of 2)
₹99.00₹49.00Add to cart- Best for Arduino, Power Bank, DIY work etc.
- Storage Box Case With Wire Lead
- Wires Color: red and black, the red cable contact the positive side of the aa battery holder case, and the black cable contact the negative side of the aa battery holder case.
- Package include :-1X 18650 Battery Holder.
-
AA-2 CELL HOLDER WITH COVER ON/OFF BHAA2C
₹199.00₹99.00Add to cart- Holds 2 x AA batteries (1.5V each – total 3V output)
- Built-in ON/OFF switch for easy power control
- Protective snap-on cover to secure batteries and prevent disconnection
- Pre-attached wire leads for quick and easy connections
- Durable ABS plastic casing for impact resistance and long life
- Compact, lightweight design suitable for DIY and embedded projects
- Secure metal contacts ensure reliable electrical connection
- Ideal for Arduino, Raspberry Pi, robotics, and electronics kits
-
AA-3 CELL HOLDER OPEN WITH WIRE BHAA3 (Pack of 2)
₹149.00₹69.00Add to cart- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
-
AA-4 CELL HOLDER WITH COVER ON/OFF BHAA4C
₹199.00₹130.00Add to cartDurable 4-cell AA battery holder with snap-on cover and built-in ON/OFF switch. Provides 6V output (1.5V × 4) with pre-attached wire leads—ideal for DIY electronics, robotics, and portable power
-
AA-4 CELL HOLDER WITH OPEN WIRE BHAA4 (Pack of 2)
₹199.00₹79.00Add to cartThe AA-4 Cell Holder with Open Wire (BHAA4) is a durable 4-slot battery holder designed for AA batteries. It provides a secure connection with pre-attached open wires for easy integration into electronic circuits
-
AA-6 CELL HOLDER OPEN WITH WIRE 3X2 BHAA6 (Pack of 2)
₹199.00₹99.00Add to cart- Cell Quantity: 6
- Battery type: AA
- Storage temperature: 25ºC
- Max Operate temperature: 80ºC
- Dimensions: 92 x 57 x 15 mm
-
AAA-2 CELL HOLDER WITH OPEN WIRE BHAAA2 (Pack of 2)
₹149.00₹99.00Add to cart- Holds 2xAAA Batteries: Securely holds two AAA batteries in place for powering various electronic projects or devices.
- Open Wire Design: Features open wire leads for easy and flexible connection to your circuits or devices.
- Durable Construction: Made from high-quality plastic for long-lasting durability and reliability.
- Compact & Lightweight: Ideal for small electronic devices, DIY projects, and portable power applications.
- Easy to Use: Simple to insert and remove AAA batteries with clearly marked positive and negative terminals.
- Secure Battery Placement: Ensures batteries stay securely in place, reducing the risk of disconnections or shorts.
-
AAA-3 CELL HOLDER WITH OPEN WIRE BHAAA3 (Pack of 2)
₹199.00₹79.00Add to cart- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
-
AC 220v Axial Cooling Blower Exhaust Fan, Size : 4.75″ Inches
₹220.00₹200.00Add to cart- Compact Size: 4.75 inches (120mm) for efficient cooling in tight spaces without compromising airflow.
- Axial Blower Design: Provides directed airflow for efficient cooling, ideal for specific cooling tasks.
- Durable Construction: Made from high-quality materials for long-lasting performance and resistance to wear.
- Efficient Cooling: Ideal for use in computers, industrial machinery, air conditioning systems, and other electronic devices.
- Easy Installation: Comes with standard mounting holes and a flanged mount for hassle-free installation.
-
AC 220V PIR Detector Infrared Motion Sensor Switch (220V/200W) Mini “S82A” ADJ SWS82A
₹699.00₹399.00Add to cart- Can switch on the load automatically after detecting the human motion for energy saving
- Load : ≤60W
- Best sensing distance: 3-5M
- Can switch on the load automatically after detecting the human motion
- 3 Time delay adjustments: 15 sec, 45 sec, 5 min
- Adjustable Ambient light modes: Deep dark, light dark, all day
- Mounting hole diameter: 25mm/0.98inch
- Induction angle: 110 degree
- Waterproof rating: IP22
-
AC 250V 10A IEC 320 C14 Panel Mount Plug Adapter Power Connector Socket with Spring Cover
₹99.00₹49.00Add to cart- Operating voltage : up to 250V
- Power rating : 10A
- Over all size : 5cm x 2.2cm
- Highly insulated
- Smart design for easy installation
- Can work in high room temperature
-
AC 250V 2.5A IEC320 C8 Socket Soldering Pins Power Connector (pack of 2) SOPH005
₹99.00₹49.00Add to cart- IEC320 C8 Compliance: Meets international safety and compatibility standards.
- Voltage Rating: Supports up to AC 250V for a wide range of applications.
- Current Capacity: Handles up to 2.5A, providing reliable power for various devices.
- Soldering Pins Design: Allows for secure and stable connections, ideal for custom projects.
- Durable Materials: Constructed from high-quality materials for longevity and wear resistance.
- Compact Size: Space-efficient design for easy installation in tight spaces.
- Versatile Usage: Suitable for electronics, power adapters, and household appliances.
