1CH POWER OFF RELAY MODULE CYCLE TIMING CIRCUIT AA260

Description

1CH POWER OFF RELAY MODULE CYCLE TIMING CIRCUIT AA260

1. After the P1: signal is triggered, the relay will lead to OP time and then disconnect; in OP time, the following operations are performed.
2. P1.1: signal re – trigger invalid
3. P1.2: the signal triggers the time again
4. P1.3: the signal is triggered again, the relay is disconnected, and the timer is stopped.
5. P-2: to trigger the signal, the relay disconnects the CL time, the relay conducts OP time, and after the timer is completed, the relay is disconnected.
6. P3.1: after the trigger signal is triggered, the relay opens the time of OP, the relay disconnects the CL time, and then circulate the above action, the relay is given again the signal, the relay is disconnected and the timing is stopped; the cycle times (LOP) can be set;
7. P3.2: after power on, there is no need to trigger the signal, the relay can lead OP time, the relay disconnects CL time, circulate the above actions, and the number of cycles (LOP) can be set.
8. P-4: if the signal has a trigger signal, the timing is zero, the relay is kept open; when the signal is disappearing, the relay is broken after the time of time OP; during the time of time, the signal is repeated and the time is zero; Product parameters:
9.  Working voltage: 6–30V supports micro USB 5.0V power supply.
10.  Trigger signal source: high level triggering (3.0V – 24V) signal does not improve the system’s anti-jamming capability with the system.
11.  Output capability: equipment that can control DC 30V 5A or less than 220v5A.
12.  Static current: 20mA working current: 50mA
13.  Service life: greater than 100 thousand times;
14.  With optocoupler isolation, enhance anti-interference ability, industrial grade circuit boards, set parameters after power failure forever, Memory.