Showing 25–48 of 187 results
-
Sale!
₹199.00 ₹99.00
- 250VAC 10A, 28VDC 10A
- Indicator LEDs
- 12V control voltage
- Module size: 43mm x 17mm
Add to cart
-
Sale!
₹299.00 ₹149.00
- Input voltage : 12V DC
- Frequency : 50HZ/60HZ
- Fast transient response
- Inbuilt over voltage, over current, and short circuit protection
- 2 USB jacks
Add to cart
-
Sale!
₹399.00 ₹225.00
- Dimension: 15 x 20 CM
- Base Material FR4
- Copper Thickness 1-4 OZ
- Board Thickness 1.6
- Min. Hole Size 0.3mm
- Min. Line Width 6mil
- Min. Line Spacing 6mil
- Surface Finishing HASL
Add to cart
-
Sale!
₹599.00 ₹549.00
- Number of channel : 16.
- Operating voltage : 12V.
- Trigger voltage : 12V.
- Switching voltage : 250V at 10A.
- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
Add to cart
-
Sale!
₹20.00 ₹9.00
- Frequency: 16MHz
- Tolerance: 30%
- Operating Temperature: -10°C to 60°C
- Shunt Capacitance: 22pF
- Package: DIP-HC49S
Add to cart
-
Sale!
₹99.00 ₹17.00
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material.
Add to cart
-
Sale!
₹99.00 ₹17.00
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material.
Add to cart
-
Sale!
₹99.00 ₹17.00
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material.
Add to cart
-
Sale!
₹99.00 ₹17.00
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material.
Add to cart
-
Sale!
₹99.00 ₹25.00
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Phosphor bronze nickel plated spring clips
Add to cart
-
Sale!
₹69.00 ₹49.00
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Phosphor bronze nickel plated spring clips
Add to cart
-
Sale!
₹99.00 ₹17.00
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material.
Add to cart
-
Sale!
₹199.00 ₹99.00
- Operating voltage: DC 5V; Trigger current: 5mA; Normally open interface maximum load: AC 250V/10A, DC 30V/10A.
- Trigger Type: Low = ground level = logic 0 = logical false | High = supply voltage (usually Vcc or Vdd) = logic 1 = logical true.
- This Module Is In Line With International Safety Standard, Control Areas And Load Area Have The Isolation Groove; Blue Kf301 Terminal Line More Convenient.
- Uses The Best Quality Relay; DC Or AC Signal Control, Can Control 220 V AC Load.
- Applications: Industrial Fields, PLC control, Household intelligent control.
Add to cart
-
Sale!
₹199.00 ₹99.00
-
Type : Single turn rotary potentiometer
-
Resistance value : 1K
-
Power rating : 0.3W
-
Shaft : 7 mm round shaft
-
Maximum Input Voltage : 200Vdc
-
Rotational Life : 2000K cycles
Add to cart
-
Sale!
₹99.00 ₹15.00
-
Type : Single turn rotary potentiometer
-
Resistance value : 1M
-
Power rating : 0.5W
-
Shaft : 7 mm round shaft
-
Maximum Input Voltage : 200Vdc
-
Rotational Life : 2000K cycles
Add to cart
-
Sale!
₹299.00 ₹199.00
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- A freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED status indicators to indicate the relay ON/OFF status
Add to cart
-
Sale!
₹179.00 ₹99.00
- High current relay, AC250V 10A, DC5V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
Add to cart
-
Sale!
₹329.00 ₹299.00
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
Add to cart
-
Sale!
₹99.00 ₹15.00
- Type : Single turn potentiometer
- Resistance value : 22K
- Power rating : 0.3W
- Shaft : D shape shaft
- Maximum Input Voltage : 200Vdc
- Rotational Life : 2000K cycles
Add to cart
-
Sale!
₹349.00 ₹299.00
- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
Add to cart
-
Sale!
₹199.00 ₹99.00
- Number of channels : 1
- Operating voltage : 24V
- Max. current : 30mA
- Trigger voltage : 24V
- Switching voltage : 250V at 10A
Add to cart
-
Sale!
₹199.00 ₹149.00
- Nuber Of Channel: 4
- Trigger Voltage: 24V
- Trigger Current: 20mA
- Switching Voltage: 25010A, Switching Voltage: 30VDC10A
- Equipped with high-current relay 10A250VAC / 10A30VDC
Add to cart