Showing 1–25 of 32 results
-
12.6V BMS 3S 5A 18650 Lithium Battery Protection Board
₹249.00₹199.00Add to cart- Product model: HW-541
- Charging voltage: DC 12.6~14V
- Maximum working current: 4~5A
- Maximum instantaneous current: 6~7A
- Battery over-discharge voltage: 2.3~2.6V
- Battery over-discharge protection recovery voltage 4.1~4.2V
- Battery over-discharge current protection point: 5.5~6.5A
- Battery overcharge protection voltage point: 4.2~4.3V
- Battery overcharge protection recovery voltage: 4.1~4.2V
-
2 SERIES 20A 18650 PCM 7.4V BP220
₹299.00₹129.00Add to cartIt supports up to 20A continuous discharge and provides essential safeguards including overcharge, over-discharge, overcurrent, and short-circuit protection.
-
2 SERIES 5A 18650 PCM 7.4V BP25
₹199.00₹99.00Add to cart- 2S 3A BMS
- Charging Voltage: 8.4V to 9V
- Charging Current: 3A
- Discharge Current: 2A
- Overcharge, Over discharge, over current protection
-
3 SERIES 12V 18650 PCM 11.1V 12.6V 10A CHEAP
₹199.00₹129.00Add to cartCompact and reliable, this 3S 18650 PCM (Protection Circuit Module) is designed for 11.1V lithium-ion battery packs with a maximum charge voltage.
-
3 SERIES 12V 18650 PCM 11.1V 12.6V 5A BP35
₹199.00₹149.00Add to cart- Product model: HW-541
- Charging voltage: DC 12.6~14V
- Maximum working current: 4~5A
- Maximum instantaneous current: 6~7A
- Battery over-discharge voltage: 2.3~2.6V
- Battery over-discharge protection recovery voltage 4.1~4.2V
- Battery over-discharge current protection point: 5.5~6.5A
- Battery overcharge protection voltage point: 4.2~4.3V
- Battery overcharge protection recovery voltage: 4.1~4.2V
-
3 SERIES 12V 18650 PCM PLATE 11.1V 12.6V 25A BP325
₹299.00₹149.00Add to cart- Overcharging and Over Discharging Protection & Short circuit protection
- Applicable assembly: Nominal 4.5V Batteries / 3 strings.
- Charging voltage: 12.6V-13V
- Overcharge detection voltage range: 4.25-4.35V±0.05V
- Over discharge detection voltage: 2.3-3.0V±0.05V
-
3 SERIES 40A 18650 PCM BOAD 11.1V 12.6V BP340
₹299.00₹149.00Add to cart- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 40A
-
3 SERIES 60A 18650 PCM BOARD 11.1V 12.6V BP360
₹299.00₹179.00Add to cart- Serial connection protection for 13S cells, so you can use this BMS for lower voltage only change the wire connection ways,
- it makes you more conveniently and flexibly to use this BMS
- Extremely low quiescent power consumption, all of the power loss can not reach more than 30 u.
- With stable and full protection functions such as precise over-charge protection, over-discharge protection, over-current protection, and short-circuit protection
- It will not affect the battery pack’s performance by using balance technology to balace the current stablely and heating distribution etc
-
3 SERIES12V 18650 PCM 11.1V 12.6V 10A.15 BP310
₹249.00₹149.00Add to cart- Overcharge detection voltage range: 4.25-4.35V±0.05V
- Over discharge detection voltage: 2.3-3.0V±0.05V
- Charging voltage: 11.1V-12.6V
- Maximum discharge current: 10A
- Maximum working current: 5A-8A
- Transient current: 9A-10A
- Quiescent current: <30µA
- Internal resistance: <100mΩ
- Effective life: >30000h
- Short circuit protection: yes, delayed self-recovery
- Working temperature: -40℃ to + 50℃
- Storage temperature: -40V to +80℃
-
3.2V BMS 1S 6A LFP 32650 4MOS Lithium Battery Protection Board
₹149.00₹99.00Add to cart- 3.2V lithium iron phosphate battery protection board 4MOS:
- Overcharge detection voltage: 3.75±0.05V
- Overcharge release voltage: 3.75±0.05V
- Overdischarge detection voltage: 2.1V±0.1V
- Upper limit continuous current: 6A
- Overcurrent detection current: 7A
- Charging voltage: 3.6V
-
3.2V LITHIUM BMS 10A 6MOS BOARD NICKLE STRIP
₹199.00₹99.00Add to cartthis BMS delivers 10 A continuous (up to 12 A peak) current handling with full safety features—overcharge, over-discharge, over-current, and short-circuit.
-
3.2V LITHIUM BMS 6A 4MOS BOARD WITH NICKLE STRIP BP16
₹199.00₹79.00Add to cart- 3.2V Lithium Iron Phosphate Battery Protection Board 4MOS:
- Overcharge Detection Voltage: 3.75±0.05V
- Overcharge Release Voltage: 3.75±0.05V
- Upper Limit Continuous Current: 6A
-
3.7V Lithium Battery Protection Board 3A BP13
₹199.00₹59.00Add to cart- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
-
3S 25A 18650 Lithium Battery Protection Board 11.1V 12.6V
₹199.00₹149.00Add to cart- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
-
3S 60A Bms Board 11.1V 12.6V 18650 Li-Ion Lithium Battery Protection Board
₹1,499.00₹1,299.00Add to cart- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 60A
-
3S BMS 25amp Li-ion 18650 Lithium 3-Cell Polymer Battery BMS Protection Board.
₹999.00₹299.00Add to cart- High accuracy voltage detection circuit.
- Maintain the battery state so that the battery does not explode.
- It is reliable and very easy to use.
-
3S BMS Module 12V 10A 18650 BMS Charger Module Li-ion Lithium Battery Protection Board.
₹299.00₹99.00Add to cart1: strictly according to the drawing wiring 0 V (B), 3.7 V (B1), 7.4 V (B2), 11.1 V (B +), not intentionally short circuit!
2: Once you have charged the first line, it will have output.
3: When connecting three battery groups, please make sure that the voltage of each battery group, if not the same, fill each battery separately and then use it in series. discharge test, the fastest battery voltage drop, which group is low battery. (2 good battery + a use effect = 3 low battery low battery use effect). -
4 SERIES 30A 18650 PCM 14.8 16V WITH CABLE BP430
₹299.00₹199.00Add to cart- Voltage Range: 14.8V nominal, 16V fully charged
- Cell Configuration: 4S (4 cells in series)
- Continuous Discharge Current: 30A
- Protection Circuit: Safeguards against overcharge, over-discharge, short-circuit, and overcurrent
- Balance Charging: Ensures even charging across all cells for optimal performance
- Thermal Protection: Prevents overheating for enhanced safety
- Charging Voltage: 16.8V (maximum charging voltage for 4 cells)
- Compatible Battery Type: 18650 lithium-ion cells
- Includes Cable: Ready to connect for easy installation
- Applications: Ideal for electric vehicles, power tools, solar storage, and DIY projects
-
4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
₹499.00₹329.00Add to cart- 4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery).
- Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery).
- Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version).
- Charging voltage: 16.8V 18.1V.
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Equalization version: suitable for starting current below 80A, power 135W below the drill.
-
4 SERIES 40A 18650 PCM 14.8 16V BP440
₹399.00₹199.00Add to cart- 4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery).
- Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery).
- Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version).
- Charging voltage: 16.8V – 18.1V.
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use
-
4S 20A 18650 Lithium Battery Protection Board 11.1V 12.6V BP420
₹299.00₹159.00Add to cart- Model: HXYP-4S-BMD1
- Small size designed for a four-cell battery pack.
- Simple wiring and circuit
- Over-charge Protection
- Continuous Current: 10A
- Max Pick Current: 20A
-
6 SERIES 24V 18650PCM PLATE 20A BP720
₹1,299.00₹899.00Add to cart- Size: approx.50*30*2mm
- Lampshift maximum discharge current: 12A; Instantaneous discharge current: 25A.
- Charging voltage: 25.5V; Charging current: 12A (MAX); Overcharge detection voltage: 4.28 ± 0.05V
- Working current: ≤30uA; Sleep current(battery over discharge)≤10uA; Temperature range: -30 / + 80 °
- Fine workmanship and durable.
-
7 SERIES 24V 18650PCM PLATE 20A BP720
₹1,299.00₹799.00Add to cart- Dally bms
- 7s 20amps
- Used for 24volt lithium ion battery
-
BMS 18650 Lithium Battery Protection Board (3S, 20A, 12.6V) (3S 20A BMS) BP320
₹199.00₹99.00Add to cart- This BMS module is commonly use to manage and protect the battery from over charge or discharge
- It is very safe and reliable to use
- This Module Provides short circuit protection; overload, discharge and overcharge protection
- This Product is Suitable to Meet a Wide Range of Requirements
