Showing 49–72 of 166 results
-
Sale!
₹299.00 ₹149.00
- Single Battery Charger Module
- Programable Charge Current Form 0.1A to 2A
- Programable Recharge Current Form 10% to 100%
- Based on Tp5000 Battery Charger IC
Add to cart
-
Sale!
₹499.00 ₹399.00
- Voltage: 3.7V
- Capacity: 1000mAh
- Size : 50x34x4 (in mm)
- Weight : 10gm
Add to cart
-
Sale!
₹499.00 ₹299.00
- Voltage: 3.7V
- Capacity: 1000mAh
- Size : 50x34x4 (in mm)
- Weight : 10gm
Add to cart
-
Sale!
₹599.00 ₹399.00
- Voltage: 3.7V
- Capacity: 1800mAH
- Approx. Size – 50x34x10mm
Add to cart
-
Sale!
₹499.00 ₹199.00
- Voltage: 3.7V
- Capacity: 250mAH
- Approx Size – 26mm x 12mm x 4mm
Add to cart
-
- Voltage: 3.7V
- Capacity: 350mAh
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Weight: 10gm
- Size: 35mm*20mm*7mm
Read more
-
Sale!
₹599.00 ₹199.00
- Voltage: 3.7V
- Capacity: 500mAh
- Approx Size: 35x25x4 (in mm)
Add to cart
-
Sale!
₹899.00 ₹399.00
- Voltage: 3.7V
- Capacity: 550mAh
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Weight: 15gm
- Size: 55mmx18mmx7mm
Add to cart
-
Sale!
₹699.00 ₹399.00
- Voltage: 3.7V
- Capacity: 650mAH
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Size: 40mm*25mm*8mm
Add to cart
-
Sale!
₹599.00 ₹199.00
- Voltage: 3.7V
- Battery Type: Lithium Polymer
- Battery Chemistry Type: LiPO
- Capacity: 70mAh
- Size : 25x8x4.5 (in mm)
Add to cart
-
Sale!
₹599.00 ₹399.00
- Voltage: 3.7V
- Capacity: 800mAh
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Weight: 16g
- Size: 40mm*25mm*8mm
Add to cart
-
Sale!
₹599.00 ₹399.00
- Voltage: 3.7V
- Capacity: 850mAh
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Weight: 25g
- Size: 57mmx25mmx8mm
Add to cart
-
Sale!
₹99.00 ₹79.00
- Input voltage 4.5-8V
- Continuously adjustable output voltage 4.3-27V
- (Above 4.3V and below 27V, any voltage can be output, you can adjust it yourself
- Turn up the pressure counterclockwise)
- Charging voltage 4.2V Charging current Max 1A
Add to cart
-
Sale!
₹99.00 ₹49.00
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
Add to cart
-
Sale!
₹99.00 ₹69.00
- 1) High-quality integrated circuits.
- 2) Exquisite detail and long service life.
- 3) Module TP4056 DIY kit parts.
- 4) Can be used for multimeter, converted to lithium-battery charging.
Add to cart
-
Sale!
₹999.00 ₹750.00
- 10S: 10 lithium-ion cells connected in series.
- 36V: Nominal voltage of the battery pack.
- 20A: Maximum continuous discharge current.
- Lithium-Ion: Battery chemistry used.
- BMS: Battery Management System for monitoring and protection.
Add to cart
-
Sale!
₹149.00 ₹99.00
- Colour Display
- Reverse Connection Protection
- Wide Variety of application
Add to cart
-
Sale!
₹199.00 ₹149.00
- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
Add to cart
-
Sale!
₹1,499.00 ₹1,299.00
- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 60A
Add to cart
-
Sale!
₹999.00 ₹299.00
- High accuracy voltage detection circuit.
- Maintain the battery state so that the battery does not explode.
- It is reliable and very easy to use.
Add to cart
-
Sale!
₹999.00 ₹249.00
- To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).
2. When you wiring 0V, 4.2V, 8.4V, 12.6V, plese do it strictly according to the wiring diagram. Do not deliberately make it short circuit.
3. When the battery is charging,the “430” resistance heating is normal,it means the balance circuit is working.If the “430” resistance is also heating without charging,please check if the wrong wire is connected.
Add to cart
-
Sale!
₹299.00 ₹99.00
1: strictly according to the drawing wiring 0 V (B), 3.7 V (B1), 7.4 V (B2), 11.1 V (B +), not intentionally short circuit!
2: Once you have charged the first line, it will have output.
3: When connecting three battery groups, please make sure that the voltage of each battery group, if not the same, fill each battery separately and then use it in series. discharge test, the fastest battery voltage drop, which group is low battery. (2 good battery + a use effect = 3 low battery low battery use effect).
Add to cart
-
Sale!
₹199.00 ₹149.00
- 3 USB 5V 1A Mobile Power Bank Charger Controller Module Step Up Boost Power Module Lithium Battery Charging Board LED
- Apply Battery Type: 18650 battery(not include)
- Output Voltage: 5V 2.1A Input Voltage: 5V 1A
- Instructions: Level 4 Capacity indicator Lighting: with LED lights
- Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)
Add to cart
-
Sale!
₹99.00 ₹59.00
- Holds 3 AA batteries
- With a cover and fixed screw
- With an ON/OFF switch
- Dimensions mm (LxWxH): 68 x 48 x 18
- Weight: 26 gm
- Material: Plastic
- Internal Connection: Series
Add to cart