Showing 1–25 of 52 results

  • Sale!
    Add to wishlist
    Quick View

    37 in 1 Sensor Kit Compatible with Arduino

    , , , , ,
    ₹999.00 ₹899.00
    1. 37 Sensors To DIY Kit
    2. Can Be Used With Arduino, Raspberry Pi, AVR, PIC, 8051
    3. Good Quality, Easy To Use And Learn.
    4. Skill Level: Beginners To Advance Level.
    5. Can Be Used For Prototype Purpose.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Acrylic Case Suitable for Raspberry Pi4 and 3.5 inch LCD

    ₹299.00 ₹249.00
    1. This simple case provides tough protection for your raspberry pi along with 3.5 inch LCD
    2. High-Quality Acrylic Construction
    3. Click together design, no screws, standoffs, or elastic bands required
    4. It is easy to use. You just need to click them together

     

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ADK USB Host Shield For Arduino AUSBS

    ₹999.00 ₹599.00
    1. USB Host Shield support the Google Android ADK and Android Phone: G1, Nexus One, Nexus S, Motorola Droid X. (Note:Mobile phone system needs to upgrade Android 2.3.4, Tablet PC needs to upgrade to Android 3.1).
    2. Compatible with following hardware: for Arduino Mega 2560 (Recommended); for Arduino Mega 1280; for Arduino Uno 328; for Arduino Diecimila / Duemilanove 328.
    3. When achieves the USB HOST function, USB Host Shield can communicate with other USB devices, support USB HUB function as well.
    4. The USB power pin have the 3.3Vin and 5Vin pins, which needs to be soldered for the shield to work.
    5. Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
    6. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
    7. Supports HID devices, such as keyboards, mice, joysticks, etc.
    8. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Arduino NANO V3.0 Development Board – Clone Compatible Model(Soldered)

    ₹599.00 ₹299.00
    1. Microcontroller                        Atmel ATmega328 SMD Package
    2. Operating Voltage (logic level)  5 V
    3. Input Voltage (recommended)  7-12 V
    4. Input Voltage (limits)               6-20 V
    5. Digital I/O Pins                        14 (of which 6 provide PWM output)
    6. Analog Input Pins                    8
    7. DC Current per I/O Pin            40 mA
    8. Flash Memory                         32 KB (of which 2KB used by bootloader)
    9. SRAM                                     2 KB
    10. EEPROM                                 1 KB
    11. Clock Speed                           16 MHz
    12. Dimensions                            0.70” x 1.70”
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Arduino NANO V3.0 Development Board Unsoldered

    ₹899.00 ₹699.00
    1. 1 pair of TTL level serial transceiver ports RX / TX
    2. Using Atmel Atmega328P-AU MCU
    3. There is a bootloader installed in it
    4. Support USB download and Power
    5. Support for external 5V ~ 12V DC power supply
    6. Support power supply by 9V battery
    7. Support ISP download
    8. Automatic reset during program download.
    9. Power OK blue LED on the bottom.
    10. Green (TX), red (RX) and orange (L) LED.
    11. +5V to AREF jumper.
    12. Auto sensing/switching power input.
    13. Small mini-B USB for programming and serial monitor.
    14. ICSP header for direct program download.
    15. Standard 0.1” spacing DIP (breadboard friendly).
    16. Manual reset switch.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Arduino NANO V3.0 Unsoldered ANANO

    ₹399.00 ₹249.00
    1. Microcontroller-Atmel ATmega328 SMD Package
    2. Operating Voltage (logic level)-5 V
    3. Input Voltage (recommended)-7-12 V
    4. Input Voltage (limits)-6-20 V
    5. Digital I/O Pins- 14 (of which 6 provide PWM output)
    6. Analog Input Pins-8
    7. DC Current per I/O Pin- 40 mA
    8. Flash Memory- 32 KB (of which 2KB used by bootloader)
    9. SRAM-2 KB
    10. EEPROM-1 KB
    11. Clock Speed-16 MHz
    12. Dimensions-0.70” x 1.70”
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ARDUINO SENSOR SHIELD V-5 ASENS

    ₹199.00 ₹99.00
    1. Retain the merits of the V4.0 version
    2. Laminated design
    3. PCB immersion gold processing technology
    4. IIC interface
    5. Bluetooth module communication interface
    6. SD card module communication interface
    7. APC220 wireless rf modules communication interface
    8. RB URF v1.1 ultrasonic sensors interface
    9. 12864 LCD string of line and parallel interface
    10. 32 servo controller interface
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Arduino UNO NANO V30 Soldered NANOS

    ₹499.00 ₹299.00
    1. Arduino Nano V3.0 ATMEGA328
    2. The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328
    3. Operating Voltage: 5V Input Voltage: 7V ~ 12V Input Voltage (limits): 6V ~ 20 V
    4. Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328)
    5. EEPROM: 1KB (ATmega328) Clock Speed: 16MHz
    6. Kit Contains: Soldered Nano compatible, Nano Cable Mini USB to USB
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ARDUINO UNO R3 DIP UNOR3

    ₹999.00 ₹549.00

    Microcontroller: ATmega328P Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 14 (6 PWM outputs) Analog Input Pins: 6 DC Current per I/O Pin: 20 mA SRAM: 2 KB EEPROM: 1 KB Clock Speed: 16 MHz Dimensions: 68.6 mm x 53.4 mm Weight: Approximately 25g Communication Interface: USB, UART (TTL Serial Communication)

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Arduino UNO SMD UNOSM

    ₹699.00 ₹299.00
    1. ATmega328P SMD Microcontroller: Features the surface-mount version of the popular ATmega328P for a more compact and durable design.
    2. 14 Digital I/O Pins: Includes 14 digital pins, 6 of which can be used as PWM outputs for controlling motors, LEDs, and more.
    3. 6 Analog Inputs: Provides 6 analog input pins for reading sensors or other analog devices.
    4. Built-in USB Connectivity: USB Type-B port for easy connection to computers for programming and serial communication.
    5. PWM Outputs: 6 digital pins support Pulse Width Modulation (PWM), ideal for controlling devices with variable output like motors and LEDs.
    6. 5V Operating Voltage: Designed to run at 5V for stable performance in most DIY and embedded projects.
    7. Power Supply Flexibility: Can be powered via USB or a 9V DC adapter, providing convenience in setup.
    8. Open-Source Platform: Fully open-source hardware and software, offering flexibility for customization and creative development.
    9. Compact Size: Measures 68.6mm x 53.4mm, making it ideal for space-constrained projects.
    10. Easy-to-Use IDE: Compatible with the Arduino IDE for easy coding, compiling, and uploading to the board.
    11. Wide Community Support: Access to an extensive online community with tutorials, examples, and troubleshooting guides.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ATTINY85 USB Development Board TINY85

    ₹599.00 ₹349.00
    1. Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
    2. Power via USB or External Source or 7-16 v to 5 v (automatic selection).
    3. The Onboard, 150 ma 5 v Regulator.
    4. Built-in USB and serial were debugging).
    5. 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
    6. 8 k Flash Memory (about 6 k after bootloader).
    7. The I2C and SPI (vis USI).
    8. The Power LED and the Test/Status LEDs.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Blue Nano Io Shield V1.0 Expansion Board NA005E

    ₹199.00 ₹107.00
    1. Type: Voltage Regulator
    2. Supply Voltage: 3 – 5V
    3. Compatible with Arduino NANO
    4. All digital and analogue pins breakout
    5. Compact size
    6. Leads all pins out, convenient for wiring and doing experiments.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Bluetooth Module ESP32-WROOM-32 8M 64Mbit WiFi Flash ESP32S

    ₹499.00 ₹279.00
    1. Two low-power Xtensa 32-bit LX6 microprocessors
    2. ESP32-D0WD core
    3. Supports multiple external QSPI flash and SRAM chips
    4. 32Mbits 3.3V SPI flash
    5. 40MHz crystal
    6. Onboard PCB antenna for ESP32-WROOM-32
    7. U.FL connector (which needs to be connected to an external IPEX antenna) for ESP32-WROOM-32U
    8. Advanced power-management technologies
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    CAM WiFi Module Bluetooth with OV2640 Camera Module (ESP32C)

    ₹999.00 ₹599.00
    1. Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    2. Low-Power Dual-core 32-bit CPU for application processors
    3. Up to 240MHz, up to 600 DMIPS
    4. Built-in 520 KB SRAM, external 4M PSRAM
    5. Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
    6. Support OV2640 and OV7670 cameras with built-in flash
    7. Support for images Wi-Fi upload
    8. Support TF card
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    CNC SHIELD V3 ENGRAVING MACHINE CNCV3

    ₹199.00 ₹139.00
    1. The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
    2. This shield allows you to control upto 4 stepper motors
    3. Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
    4. Arduino compatible
    5. Latest Arduino CNC Shield Version 3.10
    6. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
    7. Supports PWM Spindle and direction pins
    8. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
    9. Supports Coolant enable
    10. Supports removable A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
    11. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
    12. Compact design.
    13. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
    14. Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
    15. Uses removable A4988 or DRV8825 compatible stepping driver.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    DTH Power Supply Circuit Board for Free to Air D2H DTH Set Top Box Satellite

    ₹299.00 ₹159.00
    • Input : 220 V AC
    • Switch Mode Circuit(SMPS) – No transformer
    • Output : DC voltage via 6 pin header(+33V, Gnd, +12V, +24V, Gnd
    • This power supply board is compatible with most common brands
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP32 SIM800L T-CALL V1.3 ESP32S8

    ₹2,499.00 ₹1,999.00
    1. Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
    2. FLASH: QSPI flash 4MB / PSRAM 8MB
    3. SRAM:520 kB SRAM
    4. Button: Reset
    5. USB to TTL: CP2104
    6. Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
    7. On-board clock:40MHz crystal oscillator
    8. Working voltage:2.7V-3.6V
    9. Working current: About 70mA
    10. Wi-Fi Mode Station/SoftAP/SoftAP+Station/P2P
    11. Security mechanism WPA/WPA2/WPA2-Enterprise/WPS
    12. Encryption Type AES/RSA/ECC/SHA
    13. Firmware upgrade UART download/OTA(Through network/host to download and write firmware)
    14. Software Development Support cloud server development /SDK for user firmware development
    15. Networking protocol IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
    16. User Configuration AT + Instruction set, cloud server, android/iOS app
    17. OS FreeRTOS
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP32-WROOM-32 DEVELOPMENT BOARD WIFI+BLUETOOTH+BLE 38 PIN ESP328

    ₹999.00 ₹399.00
    1. Dual-Core ESP32 Processor: High-performance microcontroller with up to 240 MHz clock speed.
    2. Integrated Wi-Fi & Bluetooth: Supports 802.11 b/g/n Wi-Fi and Bluetooth 4.2 (BLE) for versatile wireless communication.
    3. 38 GPIO Pins: Offers a wide range of I/O options for sensor and peripheral connections.
    4. 4MB Flash Memory: Sufficient storage for your programs and data.
    5. Low Power Consumption: Multiple power modes to optimize energy use, ideal for battery-powered applications.
    6. Operating Voltage: Supports both 3.3V and 5V power inputs for flexibility.
    7. USB-to-Serial Interface: Easy programming and debugging through built-in USB-to-serial communication.
    8. Built-in Sensors: Includes a Hall sensor and capacitive touch support for additional functionality.
    9. Multiple Communication Protocols: Supports UART, SPI, I2C, CAN, PWM, ADC, DAC for various interfacing needs.
    10. Supported Development Environments: Compatible with Arduino IDE, ESP-IDF, and other popular programming tools.
    11. Wide Temperature Range: Operates from -40°C to 85°C, suitable for industrial applications.
    12. Compact Size: Ideal for space-constrained projects and prototyping
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP32S3 – 2.4GHz WiFi, BLE 5.0 ESP32-S3R8 chip LX7 Dual-core, 32-bit Processor Running up to 240 MHz high-Performance Board

    ₹1,999.00 ₹1,199.00
    1. Model: XIAO ESP32S3
    2. Wireless: Complete 2.4GHz WiFi subsystem, BLE: Bluetooth 5.0, Bluetooth mesh
    3. On-chip Memory: 8M PSRAM & 8MB Flash
    4. Working Temperature: -40°C ~ 65°C
    5. Processor: Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino

    ₹1,299.00 ₹499.00
    1. Microcontroller:  ATmega328P
    2. Operating Voltage: 2.7-5.5 V
    3. Digital I/O Pins: 14
    4. PWM Channels: 6
    5. Analog Input Channels: 6
    6. DC Current per I/O Pin: 40 mA
    7. Board will run from 2V to 5V.
    8. The latest version of the LilyPad supports automatic reset for even easier programming.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    LORA SX1278 0.96° OLED BLE WIFI ESP KIT 32 ESP32L

    ₹2,799.00 ₹2,299.00
    1. LoRa SX1278 Communication: Long-range, low-power communication module for IoT applications (up to 15 km range).
    2. ESP32 Microcontroller: Dual-core 240 MHz processor with built-in Wi-Fi (802.11 b/g/n) and Bluetooth Low Energy (BLE) support.
    3. 0.96″ OLED Display: High-resolution (128×64) display for real-time status and sensor data visualization.
    4. Wi-Fi Connectivity: Seamlessly connects to local networks and cloud platforms for remote monitoring.
    5. Bluetooth Low Energy (BLE): Ideal for short-range wireless communication with low power consumption.
    6. Low Power Consumption: Designed for extended battery life, perfect for portable IoT projects.
    7. GPIO Pins: Multiple input/output pins for interfacing with sensors, actuators, and external devices.
    8. PWM & ADC Support: Pulse-width modulation and analog-to-digital conversion for various control and sensor tasks.
    9. Wide Frequency Range: Supports 433 MHz, 868 MHz, and 915 MHz frequencies (region-dependent).
    10. Open-source Firmware: Compatible with Arduino IDE, ESP-IDF, and other development environments for easy programming.
    11. Flexible Interface Options: Supports I2C, SPI, UART, ADC, DAC, PWM, and GPIO for diverse project needs.
    12. Compact Design: Small and lightweight, suitable for embedded IoT projects with limited space.
    13. Wide Operating Temperature: Functional in a broad temperature range from -40°C to +85°C.
    14. Ideal for IoT Projects: Excellent for smart homes, industrial automation, health monitoring, and agricultural applications.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Mega 2560 R3 MEGAR3

    ₹1,999.00 ₹1,399.00
    1. Microcontroller: ATmega2560
    2. Operating Voltage: 5V
    3. Input Voltage (recommended): 7-12V
    4. Input Voltage (limits): 6-20V
    5. Digital I/O Pins: 54 (of which 15 provide PWM output)
    6. Analog Input Pins: 16
    7. DC Current per I/O Pin: 40 mA
    8. DC Current for 3.3V Pin: 50 mA
    9. Flash Memory: 256 KB of which 8 KB used by bootloader
    10. SRAM: 8 KB
    11. EEPROM: 4 KB
    12. Clock Speed: 16 MHz
    13. USB Host Chip: MAX3421E
    14. Length:101.98mm/4.01in
    15. Width:53.63mm/2.11in
    16. Height:15.29mm/0.60in

     

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Microcontroller Development Board ATMEGA16/32

    ₹2,199.00 ₹1,999.00
    1. Microcontroller Options: Features ATmega16 or ATmega32 for flexible project requirements with 16/32 KB of flash memory.
    2. Versatile I/O Pins: Offers up to 32 digital and analog I/O pins for connecting various sensors, actuators, and peripherals.
    3. Integrated LCD Interface: Simplifies the connection of character and graphical LCDs for creating user interfaces in your projects.
    4. In-System Programming (ISP): Allows easy uploading of code directly to the microcontroller without needing an external programmer.
    5. Breadboard-Compatible Design: Compact layout fits standard breadboards, making prototyping and testing straightforward.
    6. Multiple Power Supply Options: Can be powered via USB or an external power supply for added flexibility.
    7. Onboard LED Indicators: Includes LEDs for status indication, helping to monitor and debug your projects effectively.
    8. Comprehensive Documentation: Comes with detailed manuals, sample codes, and project ideas to facilitate learning and development.
    9. Clock Speed: Operates at a clock speed of 16 MHz for efficient processing.
    10. Communication Interfaces: Supports UART, SPI, and I2C for easy integration with various devices and communication protocols.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Microcontroller Development PIC16FXXX Board

    ,
    ₹1,299.00 ₹899.00
    1. Microcontroller Compatibility: Supports various PIC16FXXX series microcontrollers
    2. USB Programming Interface: Simple and efficient programming via USB connection
    3. Breadboard Friendly: Compact design for easy integration with standard breadboards
    4. Multiple Power Supply Options: Can be powered via USB or an external supply
    5. I/O Expansion: Numerous digital and analog I/O pins for connecting sensors and peripherals
    6. Onboard Status LEDs: Provides real-time feedback during development and testing
    7. Convenient Reset Button: Easily reset the board during programming
    8. Comprehensive Documentation: Includes user manual and example projects for quick setup
    9. Operating Voltage: 5V DC (±10%)
    10. Development Environment Compatibility: Works with MPLAB X IDE and XC8 compiler
    11. Temperature Range: Operates effectively between 0°C and 70°C
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Motor Driver Shield Expansion Board For Arduino (L293D)

    , ,
    ₹449.00 ₹229.00
    1. This L293D Motor Driver Shield for microcontrollers is versatile and features 2 servo and 4 motor connectors for DC or stepper motors. It is a great shield for any robotic project.
    2. Up to 4 bi-directional DC motors | Up to 2 stepper motors | Pull down resistors | Reset button | Big terminal block connectors | Screw terminal connectors for easy motor connection | High noise immunity inputs
    3. Dimensions(LxWxH):70x54x18 mm
    4. The bipolar pulse width method of L293D motor driver has many advantages, such as the current continuous, or microcurrent vibration when the motor stops. It can eliminate the dead zone of static friction when positive and negative.
    5. Continuous Output Current:1.2A Logic control voltage:4.5V to 5.5V 4 H-Bridges:L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection and internal kickback protection diodes
    Add to cart