Showing 26–50 of 52 results

  • Sale!
    Add to wishlist
    Quick View

    NANO EXPANSION ADAPTER BREAKOUT BOARD IO SHIELD NA005

    ₹399.00 ₹199.00
    1. Compatibility: Designed for Arduino Nano (ATmega328P).
    2. Expanded I/O Access: Easily connects additional components and sensors.
    3. Breadboard Friendly: Compact size fits standard breadboards for prototyping.
    4. Clear Pin Labeling: Pins are clearly marked for straightforward wiring.
    5. Built-in Voltage Regulator: Provides stable power supply to connected devices.
    6. Versatile Communication Options: Includes headers for SPI, I2C, and UART.
    7. Durable Construction: Made from high-quality materials for reliability.
    8. Lightweight Design: Portable and easy to integrate into projects.
    9. Pin Count: 30 pins for extensive connectivity options.
    10. Input Voltage Range: Accepts 7V to 12V DC (Vin).
    11. Output Voltage: Delivers 5V DC (regulated) for connected components.
    12. Dimensions: Compact at 60mm x 30mm x 10mm.
    13. Weight: Approximately 25 grams for easy handling.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    NODEMCU CH340 ESP8266 V3 Lua WiFi Development Board (NODE)

    ₹499.00 ₹249.00
    1. Power Input: 4.5V ~ 9V (10VMAX), USB-powered
    2. Transfer Rate: 110-460800bps
    3. Support UART / GPIO data communication interface
    4. Support Smart Link Smart Networking
    5. Working temperature: -40°C ~ 125°C
    6. Drive Type: Dual high-power H-bridge
    7. Don’t need to download resetting
    8. A great set of tools to develop ESP8266
    9. Flash size: 4MByte
    10. Lowest cost WI-FI
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    NodeMCU ESP8266 with CP2102 WiFi Development Board NODE2

    ₹499.00 ₹299.00
    1. WiFi Module: ESP-12E
    2. Processor: ESP8266
    3. CP2102 Chip
    4. Built-in Flash: 32Mbit
    5. Antenna: Onboard PCB antenna
    6. Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
    7. WiFi Protocol: IEEE 802.11 b/g/n
    8. Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
    9. WiFi Mode: Station / SoftAP / SoftAP Station
    10. Power Supply: 5V
    11. Logic Level: 3.3V
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Pro Mini 5V 16MHz ATMEGA328P Compatible Board with Arduino

    ₹1,399.00 ₹899.00
    1. Based on the ATmega328P microcontroller (same as Arduino Uno)
    2.  Operates at 5V with a 16MHz clock speed
    3. Compact and lightweight design (33mm x 18mm)
    4. 14 digital I/O pins (6 support PWM output)
    5. 8 analog input pins for sensors and analog devices
    6. Preloaded with Arduino bootloader
    7. Ideal for DIY electronics, wearables, robotics, and IoT projects
    8. Low power consumption – great for battery-powered applications
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    QBM ARDUINO OPEN SOURCE BOARDS ARDUINO MICRO

    ,
    ₹1,999.00 ₹1,599.00
    Model Type Arduino Micro
    Color Blue
    Microcontroller ATmega32U4
    Operating Voltage (VDC) 5
    Input Voltage(Recommended) 7-12V
    Analog I/O Pins 12
    Digital I/O Pins 20
    PWM Output Pins 7
    Architecture AVR
    Clock Speed 12 MHz
    DC Current per I/O Pin (mA) 20
    Flash Memory 32 KB
    EEPROM 1 KB (ATmega32U4)
    SRAM (KB) 2.5
    Weight (gm) 13
    Length (mm) 48
    Width (mm) 18
    Height (mm) 8
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    QBM ARDUINO OPEN SOURCE BOARDS ARDUINO NANO

    ,
    ₹1,199.00 ₹899.00
    • Microcontroller                        Atmel ATmega328 SMD Package
    • Operating Voltage (logic level)  5 V
    • Input Voltage (recommended)  7-12 V
    • Input Voltage (limits)                 6-20 V
    • Digital I/O Pins                           14 (of which 6 provide PWM output)
    • Analog Input Pins                      8
    • DC Current per I/O Pin           40 mA
    • Flash Memory                            32 KB (of which 2KB used by bootloader)
    • SRAM                                           2 KB
    • EEPROM                                     1 KB
    • Clock Speed                                16 MHz
    • Dimensions                                 0.70” x 1.70”
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    QBM Mega 2560 R3 Board – Compatible Model High Quality

    ,
    ₹2,199.00 ₹1,799.00
    • Microcontroller: ATmega2560
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Input Voltage (limits): 6-20V
    • Digital I/O Pins: 54 (of which 15 provide PWM output)
    • Analog Input Pins: 16
    • DC Current per I/O Pin: 40 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 256 KB of which 8 KB used by bootloader
    • SRAM: 8 KB
    • EEPROM: 4 KB
    • Clock Speed: 16 MHz
    • USB Host Chip: MAX3421E
    • Length:101.98mm/4.01i
    • QBM
    • Width:53.63mm/2.11in
    • Height:15.29mm/0.60in
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield (RED) 2560 RAMP

    ₹499.00 ₹299.00
    1. Supply Voltage: 12V
    2. Standard interfaces (as that of the extruder)
    3. Reserved GCI like I2C and RS232
    4. 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
    5. Another 5A added to protect the component parts.
    6. An 11A fuse is added to the hotbed.
    7. Support 5 stepper drive board
    8. The adoption of Pin Header as Pololu makes it more convenient to repair or change.
    9. I2C and SPI are reserved for expanding
    10. All the MOSFET can be controlled by PWM
    11. Use the interface of the servo motor to adjust the level of the printing platform automatically.
    12. Adding an SD module for SD ramps module.
    13. LED can indicate the status of the heater (the open and close of MOS).
    14. Expandable to control other accessories.
    15. Palolo boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
    16. 2 stepper motor for Z axis in parallel.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Raspberry Pi 3 – Model B+ – 1.4Ghz 64Ghz Processor with 1 GB Ram (Original)

    ₹9,999.00 ₹8,499.00
    1. Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoC
    2. Memory: 1GB LPDDR2 SDRAM 
    3. Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac
    4. Ethernet: Gigabit Ethernet over USB 2.0 (300Mbps max)
    5. USB: Four USB 2.0 ports
    6. Connection: GPIO Header 40-pin
    7. HDMI: 1 x full size
    8. Video: MIPI DSI display port, MIPI CSI camera port & 4 Pole stereo output and composite video port
    9. Multimedia: H.264, MPEG-4 decode (1080p30). H.264 encode (1080p30). OpenGL ES 1.1, 2.0 graphics.
    10. Storage: microSD card slot for loading operating system and data storage
    11. Power: USB connector for 5.1V / 2.5A dc
    12. POE enabled
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Raspberry Pi 4 Case Enclosure Official Red & White RPCASE4

    ₹599.00 ₹199.00
    1. Optional clip-on lid provides protection, but can be removed if you are using a HAT
    2. All primary ports (including micro-SD) accessible
    3. Removable side plate allows access to those wonderful GPIO pins
    4. Snug and secure fit protects your Pi 4 while looking great
    5. Anti-slip feet keeps your Raspberry Pi 4 stable
    6. Power and activity lights still visible through the end of the case
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    RASPBERRY PI FOUR 8 GB RAS48

    ₹14,999.00 ₹9,999.00
    1. Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
    2. WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
    3. LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
    4. Operating Power 5V@3A  via USB Type-C port
    5. Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    RASPBERRY PI OFFICIALS CASE 3B/3B+ RPCASEO

    ₹229.00 ₹119.00
    1. Dimensions: 96mm x 70mm x 25mm
    2. Allows easy access to camera, display ports and attached Raspberry HAT device
    3. Removable GPIO side is provided for easy access to the 40-Pin GPIO port
    4. Official enclosure from the Raspberry Pi foundation – 5 part enclosure with removable lid and sides
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Raspberry PI PICO H (with Soldered Headers) (RPICOH)

    ₹999.00 ₹499.00
    1. RP2040 microcontroller chip designed by Raspberry Pi
    2. Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
    3. 264KB of SRAM, and 2MB of onboard Flash memory
    4. 26 × multi-function GPIO pins
    5. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
    6. Onboard temperature sensor
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Raspberry Pi Pico W Wifi RPICOW

    ₹1,299.00 ₹799.00
    1. RP2040 microcontroller with 2MB of flash memory
    2. On-board single-band 2.4GHz wireless interfaces (802.11n)
    3. Micro USB port for power and data (and for reprogramming the flash)
    4. Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
    5. It can be surface-mounted as a module
    6. 3-pin Arm serial wire debug (SWD) port
    7. Simple yet highly flexible power supply architecture
    8. High quality, low cost, high availability
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Raspberry Pi Zero 2 W

    ₹6,999.00 ₹4,999.00
    1. Raspberry Pi-designed System-in-Package, which integrates the BCM2710A1 die used in Raspberry Pi 3 with 512MB of RAM.
    2. HAT-compatible 40-pin header
    3. Composite video and reset pins via solder test points
    4. CSI camera connector
    5. VideoCore IV GPU
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    RASPERRY PI ACRYLIC CASE RPCASE

    ₹229.00 ₹119.00
    1.  Acrylic case with access to all Ports on pi 4
    2. Compatible for All variants of the Raspberry pi 4 Model B
    3. Easy to assemble without any Screws or Nut-Bolts
    4. Slots to route GPIO and CSI ribbon cable
    5. Cut-out for micro SC card at the bottom panel
    6. Mounting holes and anti-slip rubber feet at the back.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    SanDisk 16GB Ultra microSDHC UHS-I Memory Card with Adapter – 98MB/s, C10, U1, Full HD, A1, Micro SD Card

    ₹851.00 ₹399.00
    1. Ideal for Android Smartphones and Tablets, and MIL Cameras
    2. Capacities up to 512GB (1GB=1,000,000,000 bytes; Actual user storage less) to store even more hours of Full HD video (Approximations; Results and Full HD (1920×1080) video support may vary based on host device, file attributes and other factors)
    3. Up to 98MB/s transfer read speed (Based on internal testing; Performance may be lower depending on host device, interface, usage conditions and other factors) lets you move up to 1000 photos in a minute (Based on 4.1GB transfer of photos (avg. file 3.5MB) with USB 3.0 reader; Results may vary based on host device, file attributes and other factors)
    4. Load apps faster with A1 rated performance (A1 Performance is 1500 read IOPS, 500 write IOPS; Based on internal testing; Results may vary based on host device, app type and other factors)
    5. Class 10 for Full HD video recording and playback (Full HD (1920×1080) video support may vary based upon host device, file attributes, and other factors)
    6. SanDisk Memory Zone app for Easy file management (Download and Installation Required)
    7. 10 year limited manufacturer warranty
    8. Order with your Alexa enabled device; Just ask ‘Alexa, order SanDisk microSD’

     

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ST LINK V2 PROGRAMMER STV2

    ₹399.00 ₹210.00
    1. Programmer For: STM8 and STM32; PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable; Interface definition directly marked on the shell, clear, convenient, and practical
    2. 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V; Shell characters using laser engraving, never fade off! Permanent clarity; 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
    3. Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working conditions; With 4 DuPont lines, so you can easily respond to different target board line orders; Use anti-static bag packaging.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    STM32 F103C8T6 Minimum System Board Microcomputer ARM Core Board (STM32)

    ₹999.00 ₹349.00
    1. Brand New and High quality STM32 Board
    2. Model: STM32F103C8T6.
    3. Core: ARM 32 Cortex-M3 CPU.
    4. Debug mode: SWD.
    5. 72MHz work frequency.
    6. 64K flash memory, 20K SRAM.
    7. 2.0-3.6V power, I/O.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    STM32 MCU Board STM32F103C6T6 STM32

    ₹299.00 ₹199.00
    1. Onboard Mini USB interface, you can give the board power supply and USB communication.
    2. 72MHz work frequency
    3. 64K flash memory, 20K SRAM
    4. 2.0-3.6V power, I/O
    5. Reset(POR/PDR)
    6. 4-16MHz crystal
    7. 32 kHz oscillator for RTC with calibration
    8. Up to 2 x I2C interfaces (SMBus/PMBus)
    9. Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
    10. Up to 2 SPIs (18 Mbit/s)
    11. CAN interface (2.0B Active)
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    STM32 MCU BOARD STM32F103C8T6 STM32O

    ₹999.00 ₹499.00
    • Microcontroller:
    • ARM Cortex-M3 32-bit core, up to 72 MHz clock speed.
    • Memory:
    • 64KB Flash memory for program storage.
    • 20KB SRAM for data storage.
    • I/O & Peripherals:
    • 37 GPIO pins for versatile input/output.
    • 3 x Timers with PWM support.
    • 12-bit ADC with up to 16 channels for analog-to-digital conversion.
    • 1 x UART, 1 x SPI, 1 x I2C for communication.
    • 1 x CAN (Controller Area Network) interface.
    • Power Consumption:
    • Multiple low-power modes (Sleep, Stop, Standby) for energy-efficient applications.
    • Programming & Debugging:
    • SWD/JTAG interfaces for easy programming and debugging.
    • Development Support:
    • Compatible with STM32CubeIDE, KEIL, and other popular development environments.
    • Open-source libraries for rapid prototyping.
    • Voltage Supply:
    • Powered by 3.3V (with external 5V supply or USB connection).
    • Package Type:
    • LQFP-48 package (48 pins).
    • Applications:
    • Ideal for embedded systems, IoT, robotics, automation, and prototyping projects.
    • Additional Features:
    • Integrated 3.3V voltage regulator for powering external peripherals.
    • High-performance MCU suitable for real-time processing and low-power applications.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    THICK ACRYLIC CASE SUITABLE FOR RASPBERRY PI3 3.5 INCH LCD RPD35C

    ₹299.00 ₹149.00
    1. Transparent acrylic cover for your Raspberry Pi 3/2 model B to protect your mainboard with the 3.5″ LCD touchscreen mounted.
    2. Made from thickened clear acrylic plate perfect match with the mainboard and give access to all ports, easy to use.
    3. Screw mounting design easy to install the best partner for your Pi.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    UNO PROTOTYPE SHIELD with 170PTS BREADBOARD for Arduino UNO ABREAD

    ₹599.00 ₹149.00
    1. It has a nice standard 0.1″x0.1″ prototyping grid with big pads
    2. Comes with Stacking headers and plain header, choose whichever you want when soldering together
    3. An IC pattern for adding DIP ICs up to 20 pins
    4. Power rails down the middle and sides
    5. A reset button and an extra general use button
    6. Two 3mm general use LEDs, red and green, as well as 2 matching resistors
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    UNO R3 TFT SCREEN ADAPTER ZA010

    ₹499.00 ₹349.00
    1. TFT01 LCD screen works at 3.3V voltage, it cannot be used directly on standard Arduino board, so for TFT01 screen to be compatible with standard Arduino board, TFT sec Shield, can be directly connected to the Arduino board.
    2. [TFT01 LCD 16] TFT01 LCD 16 can support the current mode, since there is enough Mega2560 IO, although only a touch screen interface or SD card interface is used, such as the ca328 will not exist.
    3. [8-bit mode] TFT01LCD supports 8-bit mode, you can use SD card interface and touch screen interface at the same time, adopt voltage division IC, have TFT as screen more stable.
    4. [3.2 Inch] 3.2 inch TFT LCD screen, can be directly to the 3.2 “TFT on the screens, it can be compatible with the Arduino.
    5. [Applicable] This Arduino Mega V2.2 TFT01 LCD is fit for 3.2 inch TFT LCD module; The MEGA TFT01 shield supports 16-bit mode; Because Mega Board has enough pins to use SD card shield and touch function at the same time.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    USB AVR PROGRAMMER DOWNLOADER + CABLE AVRPU AVRPU

    ₹499.00 ₹299.00
    1. The USB AVR ISP programmer is designed ATMega8A-AU main chip that supports AVR, ASP and AT89S51/52 microcontroller.
    2. This USB programmer features an autospeed autofocus firmware that will automatically track the chip frequency and change speed to achieve speed control.
    3. This USB programmer can be powered by external power supply (target board) or from USB Port Autospeed control function for flashing devices to get the best performance/stability
    4. The output of the USB ATMEGA8 Programmer ATMEL standard port as it’s output port that features overcurrent protection.
    5. Supports SLOW function for special applications PTC fuse for protecting your USB power / computer
    Add to cart