Showing 1–24 of 42 results
-
0.56 Inch Single Digit Seven Segment Display
₹49.00₹12.00- High Intensity Output
- Economically Priced
- Color: Red
- Size: 0.56″ (LxW – 0.7″ x 0.5″)
- Easy to Mount
- RoHS Compliant
-
0.56 inch with clock Red 4 Digit 7 Segment LED Display CC 12pin
₹99.00₹51.00- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
- Easy to Use with PCB Mounting as well as on Breadb
-
0.56″ 3 Digit 7 Segment Display DSS3
₹199.00₹99.00- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
-
0.56″ Seven Segment Single Digit Display DSS1
₹99.00₹49.00- Type: Common Cathode
- Colour: RED
- High Brightness
- Low Current Consumption
- Easy to Use
-
0.91” 12C IIC OLED LCD Module 4Pin (GND VCC) OLED91
₹599.00₹299.00- Size: 0.91 inch
- Resolution: 128 x 32
- Controlling Chip: SSD1306
- Display Area: 22.384 x 5.584mm
- Driving Voltage: 3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- This 0.91” I2C OLED Display is an OLED monochrome 128×32 dot matrix display module with I2C Interface.
- It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface.
- Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption.
- It is compatible with any 3V-5V microcontroller, such as Arduino.
-
0.96 Inch I2C/IIC 4pin OLED Display Module (Blue)
₹299.00₹170.00- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- Dimension : 2 x 2 cm
-
0.96 Inch I2C/IIC 4pin OLED Display Module (Yellow + Blue) Without Soldered Pin
₹499.00₹199.00- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
-
0.96” 12C IIC OLED LCD Module 4Pin (GND VCC) OLED96
₹599.00₹299.00- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
-
1.3 Inch I2C/IIC 128 x 64 -WHITE OLED Display Module 4pin-Black PCB-Unsoldered
₹999.00₹666.00- Driver IC: SSH1106
- Resolution: 128 x 64 pixel
- Display Area : 34.5 x 19mm
- Input Voltage: 3.3V ~ 6V
- Operating Temp : -40º~70º Celsius
- Interface Type : IIC
- Pixel Color: White
- No of Pins: 4 pin
-
1.3″ 12C IIC OLED LCD Module 4Pin (GND VCC) OLED13
₹699.00₹449.00- Display Colour: Blue
- Resolution : 128×48 pixels
- Driver IC: SH1106
- Fully Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Factory configured for SPI protocol (can be easily changed to IIC)
-
1602 LCD Display with Blue Backlight
₹999.00₹199.00- Model: LCD1602
- Character Color: White
- Backlight: Blue
- Supply Voltage: 5V
- Board Dimensions (LxWxH) mm.: 80 x 36 x 10
-
2.4 inch LCD Touch Display Shield for Arduino Uno with onboard Micro SD Slot
₹1,099.00₹549.00- 2.4″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 240X320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
-
2.4″ Display For UNO UD24C
₹899.00₹599.00- 2.4″ diagonal LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5.
- Pin 12 is available if not using the microSD
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- 4-wire resistive touchscreen
-
3.5 inch TFT LCD Touch Screen Display for Raspberry PI
₹1,499.00₹1,199.00- Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
- Supports all revision of Raspberry Pi (directly-pluggable models)
- Works with Raspbian/Ubuntu directly
- Comes with full set of screws and nuts for assembly
- 320×480 resolution, better display
- Lightweight and easy to install
-
3.5inch TFT Touch Screen Display for Arduino
₹1,499.00₹925.00- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
-
4 Bits Digital Tube LED Display Module with Clock Display
₹99.00₹50.00- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
-
4 Bits TM 1637 Red LED Display Module & Clock DSS4M
₹199.00₹99.00- Display device is 4-digit yang red digital tube
- Digital tube 8-level grayscale adjustable
- Control interface level can be 5V or 3.3V
- The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.
- Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.
-
4 Digit 7 Segment Display 0.56″ “5461AS DSS4
₹199.00₹99.00- Common Anode
- Pin Number: 12 pins
- Digit Number: 4 digits
- Digit Height: 0.56 inch / 1.4 cm
- Size (L x W ): 2 x 0.75 inch / 5 x 1.9 cm
-
4×4 Matrix Keypad Membrane Switch (AA084)
₹199.00₹99.00- 4 x 4 Matrix Membrane Keypad
- 8 pin connector
- Adhesive mounting (sticker on the back side)
- Operation Temperature: 0 to 60 centigrade
- Humidity: 40 centigrade, 90%-95%, 240 hours
- Flexible Circuit Length: Approx. 3.3 inch / 83 mm
-
4X4 Matrix 16 Keypad Keyboard led NA003
₹199.00₹99.00- The 4 x 4 matrix keypad usually is used as input in a project. It has 16 keys in total, which means the same input values.
- The 4 x 4 Matrix Keypad Module is a non-encoded matrix keypad consisting of 16 keys in parallel.
- The keys of each row and column are connected through the pins outside – pin R1-R4 as labelled beside control the rows, when L1-L4, the columns.
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin