Showing 97–120 of 137 results
-
Sale!
₹199.00 ₹99.00
- Height : 11mm
- Width : 25mm
- Material: high quality plastic
Add to cart
-
Sale!
₹99.00 ₹79.00
- Material: MS steel.
- Thickness: 1mm.
- Mounting Hole: 3mm.
Add to cart
-
Sale!
₹399.00 ₹349.00
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motors output shaft.
Add to cart
-
Sale!
₹1,899.00 ₹1,599.00
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Add to cart
-
Sale!
₹599.00 ₹299.00
- Water Pump, Bigger High Quality Solar Pump 500-600 L/H.
- Not self-priming, no suction lift, pump location should be lower than fluid surface in order that fluid can flow into pump body actively Waterproof, submersible.
- Model Number: WP8W Voltage: DC 12V Power: 8W H-Max: 5 M Flow: 10L/min.
- Working voltage range: 8Vdc-15Vdc Rated voltage: 12Vdc Working current: 0.6A-1A.
- Model Number: WP4W Voltage: DC 12V Power: 4W H-Max:1 M Flow: 4L/min.
Add to cart
-
Sale!
₹999.00 ₹299.00
- NOTE: Load must be connected before the voltage is adjusted .
- Thyristors are mainly used for resistive loads (heating filament incandescent lamps, etc.). Most single-phase AC motors are also Supported, but all motors are not guaranteed. Other types of loads are subject to buyer’s confirmation.
- The fuse is not a Permanent Solution. It has a response time. If the current is too large, the module may be burned apart from the fuse. It is 4000watt and work well but recommended for 2000watt load if used for longer time.
- Voltage Regulation: AC 0-220V Size: L85mm x W60mm x H40mm rotation hole 6mm SCR Model: BT-800B
- Voltage: AC 0-220V Maximum power: 4000W
Add to cart
-
Sale!
₹299.00 ₹249.00
- Recommended voltage ratings are 9v 1A or 12v 1A.
- Maximum suck range of 2m.
- The maximum head range of 3m.
- Works with liquids of up to 80°C.
- The maximum flow rate of up to 1 – 3L/min.
- Rubber Color: Black/Transparent/Random.
Add to cart
-
Sale!
₹119.00 ₹59.00
- No-load Speed: 1:48 (3V)
- Operating Voltage: 3V ~ 6V DC
- Load Current: 70mA (250mA MAX)
- With EMC, it has an anti-interference ability
- Recommended Operating Voltage: about 3 to 6V DC
Add to cart
-
Sale!
₹119.00 ₹59.00
- 100% Brand New and High Quality
- This is DC gear motor and the torque is large, the current is low and it is suitable for battery applications.
- Widely used in smart car, boat mode.
- Working voltage 3-6V
- Dc motor reducer, dual axis, with dc 6v operating voltage and a rpm of 100r / minute, this gear box is applied for tracing car or robot
Add to cart
-
Sale!
₹99.00 ₹49.00
- Operating Voltage: 6V – 12V
- . No-load Current: 1.8A
- . Maximum Current: 3.8A
- . No Load RPM: 8300
- . Diameter: 27.4mm
- . Length: 38mm
- . Complete Motor Shaft Length: 57mm
- . Visible Motor Shaft Length: 13mm
- . Motor Shaft Shape: Half D Cut & Half Round
- . Two tapped mounting holes, M2.6 x 0.45, on 16mm centres on the motor face.
Add to cart
-
Sale!
₹199.00 ₹99.00
- perating Voltage: 5-15VDC
- No Load Current: 0.2A
- No-load Speed: 4000RPM
- Rated Torque: 265 g.cm
- Full Load Current: ≤2A
- Rated Current: ≤2A
- Rated Power: 24W
- Rated Speed: 4000RPM
Add to cart
-
Sale!
-
Sale!
₹699.00 ₹549.00
- Voltage: 12V DC.
- Speed: 3000 RPM.
- Torque: 5.29 N-cm.
- Output Power: 13.20w.
- Rated current (mA): 2000
- Shaft diameter: 2.3 mm.
- Shaft length: 6 mm.
Add to cart
-
Sale!
₹729.00 ₹369.00
- Operating Voltage : 4.8 ~ 6.6v
- Temperature Range : 0- 55℃
- Stall Torque 4.8V : 9.40 kg-cm
- Stall Torque 6.6V : 11 kg-cm
- Operating Speed 4.8V : 0.19sec/60°
- Operating Speed 6.6V : 0.15sec/60°
- Dead Bandwidth : 1uS
- No. of teeth : 25
Add to cart
-
Sale!
₹609.00 ₹309.00
- It comes with a 3-pin power .
- control cable.
- wide selection of control horns and mounting hardware.
- Gear Material: Nylon.
- Output Shaft Support Plastic : Bearing.
- This basic servo is used in cars, boats, or where standard servos are used.
- This servo can produce high-current draw from your batteries.
Add to cart
-
Sale!
₹629.00 ₹319.00
- Operating voltage: 4.8-7.2V.
- Operating Speed: 23 sec/60° (4.8V), 19 sec / 60° (6.0V)
- Temperature range: -30°C — +60°C.
- Great for Racing Car, Helicopter and Airplane.
- Dimension: 4cm x 2cm x 3.8cm
Add to cart
-
Sale!
-
Sale!
₹319.00 ₹159.00
- Model: SG90R.
- Operating voltage: 3.0V~ 7.2V.
- Servo Plug: JR
- Stall torque 4.8V : 1.2kg-cm.
Add to cart
-
Sale!
₹199.00 ₹149.00
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
Add to cart
-
Sale!
₹199.00 ₹99.00
- Shaft length: 7 mm
- Shaft Diameter: 5.5 mm
- Size: 55 x 48 x 23 mm.
- Operating Voltage: 3 to 12V.
- Current (without loading): 40-180mA.
- RPM: vary.
- Output Torque: 0.8 kg-cm.
- Color: Multiple
Add to cart
-
Sale!
₹799.00 ₹399.00
- 8Vdc-15Vdc Rated voltage: 12Vdc Working current: 0.6A-1A.
- 12V Power: 4W H-Max:1 M Flow: 4L/min
Add to cart
-
Sale!
-
Sale!
₹1,499.00 ₹749.00
- Rated Voltage (V) – 4.2. Current/ phase (A) – 3.
- Inductance/ ph. mH – 3.6. Resistance/ phase (ohms) – 1.4
- Holding Torque (kg-cm) – 34. No. of Leads – 4
- Weight (kg) – 1.7. Length (mm) – 66
- Step Angle – 1.8°. Step Angle Accuracy – ±5% (full step, no load).
Add to cart
-
Sale!
₹3,469.00 ₹1,739.00
- Rated voltage (v) – 66, Current/ phase (a) – 1, resistance/ phase (ohms) – 6.6
- Holding torque (kg-cm) – 7.2
- No Of leads – 6
- Step angle – 18 degree
- Frame size (mm) – 57×57, shaft length (mm) – 20.6
Add to cart