Showing all 9 results
-
Body Scale Load Cell Sensor Resis Strain 50Kg LOAD50B
₹99.00₹60.00Add to cart- Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
- Widely used in hopper scales, platform scales, platform balance, belt scales, and other electronic weighing devices.
- This is a half-bridge load sensor, which is widely used in weight scales. When the half-bridge is being stretched, it sends the signal via the red signal wire.
- Alloy Steel wired weighing load cell, high accuracy, simple structure, simple installation.
You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
-
Weighing Load Cell Sensor 10Kg LOADS10
₹399.00₹199.00Add to cart• 1 x YZC-133 Weighing Load Cell Sensor 10kg For Electronic
Weighing Scale
• Each load cell is able to measure the electrical resistance
that changes in response to, and proportional of, the strain
(e.g. pressure or force) applied to the bar. -
Weighing Load Cell Sensor 1KG YZC-131 LOADS1
₹299.00₹199.00Add to cart- A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
- This is a standard load cell for measuring weight upto 1 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
-
Weighing Load Cell Sensor 20Kg LOAD20
₹399.00₹220.00Add to cart- The YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale is a device that can convert up to 20 kg of force into an electrical signal.
- It works by measuring the change in electrical resistance that occurs when a strain (e.g. pressure or force) is applied to the metal bar.
- This sensor can be used to measure the weight of an object, detect changes in weight over time, or sense the presence of an object by measuring the strain or load on a surface. The sensor is made of aluminium alloy and has a maximum capacity of 1KG.
- The sensor has four lead wires that can be connected to the HX711 A/D Pressure Sensor. It operates with a driving voltage of 5-10V and produces an output voltage that varies according to the force applied to it.
- To install the sensor, one end should be fixed with a screw and the other end should be left free. The direction of the gravitational force should match the label on the sensor.
- The white plastic cover on the sensor should not be pushed directly to avoid damage.
- An electronic weighing machine uses a load cell to measure the load or pressure generated by the weight. Most load cells use the strain gauge method, which converts the force into an electrical signal.
- The load cells have four strain gauges arranged in a Wheatstone bridge circuit.
-
Weighing Load Cell Sensor 3Kg LOADS3
₹299.00₹199.00Add to cart1) Electronic platform scale.
2) Digital scale.
3) Parcel post scale.
4) Electronic balance. -
Weighing Load Cell Sensor 50Kg LOAD50
₹899.00₹599.00Add to cart- Capacity (Kg): 50.
- Output Sensitivity (mv/v): 1.0±0.1.
- Nonlinearity (%FS): 0.03.
- Repeatability (%FS): 0.03.
- Input Resistance (Ω): 1000.
- Insulation Resistance (MΩ): ≥5000.
-
Weighing Load Cell Sensor 5KG LOADS5
₹299.00₹199.00Add to cart- A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured.
- The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
- This is a standard load cell for measuring weight up to 5 Kg. The output of the load cell is in mile-volts and cannot be directly measured by a micro-controller.
- So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
-
Weighing Pressure Sensor Module Big HX711
₹199.00₹130.00Add to cart- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
-
Weighing Pressure Sensor Module Small HX711S
₹199.00₹102.00Add to cart- HX711 features dual-channel 24 Bit Precision A/D Weight Pressure Sensor Load Cell Amplifier which is available in a small breakout board.
- The board has pinouts for the microcontroller and the Load cell in two different directions for the ease of interfacing. It can be interfaced with any microcontroller using Data and Clock pins.
- This module supports input voltage from 2.7V to 5V, making it ideal for the 3.3V and 5V microcontroller operations.
- A Resistive Load cell with two differential inputs can be used with this module and could achieve high accuracy in low and high weight measurements.
- This low cost, analogy front load cell amplifier is the perfect choice for Balance and load cell interfacing.
- The current consumption of this amplifier is also low with less than 1uA in power down state and 1.5mA only in normal operation or active state.
