- Long-Range Communication: Capable of up to 15 km transmission range (depending on environmental factors).
- LoRa Modulation: Utilizes LoRa technology for long-range, low-power communication with excellent interference resistance.
- Multiple Frequency Support: Operates on 433 MHz, 868 MHz, and 915 MHz frequencies (region-dependent).
- Low Power Consumption: Ideal for battery-powered applications, ensuring long operational life with minimal energy use.
- Wide Data Rate Range: Adjustable data rates from 300bps to 37.5kbps for optimal performance based on use case.
- High Sensitivity: Features a sensitivity of -148 dBm for superior reception in noisy or challenging environments.
- Integrated FIFO Buffer: Onboard FIFO buffer for smoother data handling and reduced CPU load.
- Flexible Interface Options: Compatible with both SPI and UART interfaces for easy integration with microcontrollers.
- Built-in Low Noise Amplifier (LNA): Enhances signal reception, ensuring more reliable communication.
- Compact Size: Small form factor (27mm x 16mm) for easy integration into space-constrained applications.
- Adjustable Transmission Power: Up to +20 dBm, depending on frequency and regional requirements.
- Wide Operating Temperature: Functional within a broad temperature range of -40°C to +85°C.
- Antenna Connection: External antenna port (SMA or U.FL depending on model) for improved signal quality.
- Low Receiver Current: Low current consumption (<13 mA) for efficient power management in remote applications.
- Ideal for IoT and Remote Sensing: Perfect for long-range wireless IoT, remote control, smart agriculture, and industrial monitoring projects.
Showing all 14 results
-
865-868MHZ/2.5 GAIN RUBBER DUCK ANTENNA L ANT2D
₹299.00₹99.00- Frequency: 865 ~ 868 MHz
- Connector Type: SMA Plug Right Angle
- Application: GSM, 2G, 3G ,4G, LTE, ISM
- Polarization: Vertical Power Handling: 10 W HPBW: H:3600 / V:400
-
CJMCU MCP4725 I2C DAC Breakout Development Board M4725
₹599.00₹249.00- 12-bit resolution
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- I2C Interface (Standard, Fast, and High-Speed supported)
-
CJMCU TCA9548A I2C 8CH MULTIPLE EXT. DEV. BOARD I2C8
₹199.00₹149.008 I2C devices with the same address using this TCA9548A-based multiplexer. Ideal for expanding I2C communication on Arduino, Raspberry Pi, and other microcontrollers. Supports 3.3V and 5V logic levels.
-
EM18 RFID READER MODULE EM18
₹399.00₹299.00125kHz. Reads EM4100-compatible RFID tags and outputs 12-digit IDs via UART or Wiegand26. Ideal for access control, attendance systems, and embedded RFID projects.
-
GSM 3 dBi MOUNT SPRING ANTENNA 3 MTR CABLE WITH SMA CONNECTOR ANT3M
₹269.00₹139.00- 3 dBi Gain: Provides enhanced signal strength for improved GSM network reception.
- Spring-Mounted Design: Durable and flexible spring base helps withstand physical stress and harsh conditions.
- 3 Meter Cable: Long cable for convenient installation and flexibility in positioning the antenna for optimal signal reception.
- SMA Connector: Standard SMA male connector ensures secure and reliable connection to GSM modems, routers, or other devices.
- Wide GSM Compatibility: Suitable for GSM devices operating on multiple frequency bands (850/900/1800/1900 MHz).
- Indoor/Outdoor Use: Designed for both indoor and outdoor applications, perfect for homes, vehicles, and remote installations.
- High-Quality Build: Rugged materials for long-lasting durability and performance.
- Easy Installation: Mountable design for quick and simple setup in a variety of locations.
-
GSM 5 dBi MOUNT SPRING ANTENNA 3 MTR CABLE WITH SMA CONNECTOR ANT5M
₹289.00₹149.00- 5 dBi Gain: Provides superior signal strength and enhanced GSM network reception.
- Spring-Mounted Design: Flexible spring base helps the antenna endure physical impacts and maintain performance in tough conditions.
- 3 Meter Cable: Long cable allows for versatile positioning and easy installation for optimal signal capture.
- SMA Connector: Standard SMA male connector ensures secure and reliable connectivity to GSM modems, routers, or other devices.
- Wide Frequency Support: Compatible with GSM devices across multiple frequency bands (850/900/1800/1900 MHz).
- Indoor/Outdoor Use: Durable design suitable for both indoor and outdoor environments, ideal for home, vehicle, or remote installations.
- Durable Construction: Built with high-quality materials for reliable, long-term use.
- Easy to Install: Simple mountable design for quick setup in various locations.
-
IIC/I2C Serial Interface Adapter Module I2CM
₹199.00₹99.00- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
-
MCP2515 CAN BUS Module TJA1050 REC SPI 51 Single CAN2515
₹199.00₹139.00- Support CAN V2.0B technical standard, communication rate 1Mb/S.
- Use High-speed CAN transceiver TJA1050
- Dimension: 40×28mm
- SPI control for expand Multi CAN bus interface
- 8MHZ crystal oscillator
- 120Ω terminal resistance
- Module 5V DC power supply.
- 0 to 8 bytes long data field.
- Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation
- The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
- Use serial port could view the communication data
- With the independent key, LED indicator, Power indicator
- With power pin
- Standard frames, extended frames, and remote frames.
- Positioning screw hole centre spacing 23 mm x 38 mm
-
MFRC 522 RFID MODULE WITH RF CARD AND FOB RC522K
₹199.00₹149.00The MFRC522 RFID Module is a 13.56 MHz contactless reader/writer ideal for RFID-based projects. It comes with one RFID card and one key fob, making it perfect for access control, attendance systems
-
PCF8574T I2C I/O EXTENSION BOARD P8574
₹199.00₹129.00- Interface: I2C
- Operating Voltage: 3-5VDC
- Ports: 8-bit Parallel Ports
- Can be used with Arduino and Raspberry Pi
-
PN532 NFC RFID Read/ Write Module V3 Kit PN532
₹899.00₹399.00- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
-
UBLOX NEO-6M With Eeprom With Antenna NEO6M
₹899.00₹299.00- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Cable length:10 cm Separated 18 x 18mm GPS antenna.