Showing all 9 results
-
Arduino UNO R3 Development Board (DIP) ATMEGA16U2 ATMEGA328P
₹999.00₹649.00- 14 digital input/output pins,
- 6 analogue inputs,
- 16 MHz crystal oscillator,
- USB connection,
- power jack,
- ICSP header
-
ATTINY85 USB Development Board (TINY85)
₹999.00₹399.00- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
-
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
₹1,299.00₹799.00- Microcontroller: ATmega328P
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
-
MCP4725 I2C DAC Breakout Development Board
₹599.00₹299.00- 12-bit resolution
- I2C Interface (Standard, Fast, and High-Speed supported)
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- Mounting hole diameter: 2.5mm
- Distance between mounting hole: 11.5mm
-
NODEMCU CH340 ESP8266 V3 Lua WiFi Development Board (NODE)
₹499.00₹249.00- Power Input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer Rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
-
PICKIT3 Debugger Programmer Emulator Controller Development Board
₹2,999.00₹2,799.00- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
-
QBM EAEC100100-204 Nodemcu Wifi Development Board (Black) (NODE2)
₹899.00₹399.00It is based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
Power your developement in the fastest way combinating with NodeMCU Firmware!
USB-TTL included, plug&play
10 GPIO, every GPIO can be PWM, I2C, 1-wire
Open source IoT Platform
Easily Programmable
Low cost & Simple to Implement
WI-FI enabled
-
STM32 Minimum System Development Board STM32F103C6T6 ARM Core Module (STM32O)
₹999.00₹499.00- Onboard Mini USB interface, you can give the board power supply and USB communication.
- 72MHz work frequency
- 32KB flash memory, 20K SRAM
- 2.0-3.6V power, I/O
- Reset(POR/PDR)
- 4-16MHz crystal
- 32 kHz oscillator for RTC with calibration
- Up to 2 x I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to 2 SPIs (18 Mbit/s)
- CAN interface (2.0B Active)