Showing all 10 results
-
5 MP OV5647 CAMERA MODULE WITH IR-CUT FOR RASPBERRY PI OV5647
₹999.00₹799.00Add to cart- Raspberry Pi Camera, supports all revisions of the Pi
- Using IR-CUT filter, it can eliminate colour distortion in the daylight
- 5-megapixel OV5647 sensor
- Can Attach IR LEDs if Night Vision mode is required
- The screw hole on the camera is used to both fix the infrared lights and through the power for the lights.
-
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
₹499.00₹299.00Add to cart- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
-
5V 0.2A 3007 Cooling Fan for Raspberry Pi and 3D Printer
₹149.00₹129.00Add to cart- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
-
5V 0.2A 3010 Raspberry Pi Cooling Fan
₹199.00₹149.00Add to cart- Model name : 3010
- Working voltage : 5V
- Lightweight
- Durable
- Dimensions of the fan : 30mm x 30mm x 10mm
- Comes with two red and black wires attached
-
Black Aluminum Heatsink for Raspberry Pi
₹199.00₹69.00Add to cart- Dimensions: 14 x 14 x 7 (LxWxH) mm
- Material: aluminum
- Color: Black
- Teeth Number: 4 rows and 5 columns
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
-
Official Raspberry Pi Black 4 in 1 Heat Sink Set Aluminum for Pi 4B RA537
₹199.00₹79.00Add to cart- Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B
- Material: aluminum
- Color: Black
-
Raspberry Pi 3/3B+ Plastic Case (Red and White)
₹249.00₹199.00Add to cart- The optional clip-on lid provides protection but can be removed if using a HAT
- All primary ports (including microSD) accessible
- Removable side plate allows access to those wonderful GPIO pins
- Snug and secure fit protect your Pi while looking great!
- Anti-slip feet keep your Raspberry Pi stable
- Power and activity lights still visible through the end of the case
-
Raspberry PI PICO H (with Soldered Headers) (RPICOH)
₹999.00₹499.00Add to cart- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
-
Raspberry Pi Pico W Wifi RPICOW
₹1,299.00₹799.00Add to cart- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB port for power and data (and for reprogramming the flash)
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- It can be surface-mounted as a module
- 3-pin Arm serial wire debug (SWD) port
- Simple yet highly flexible power supply architecture
- High quality, low cost, high availability
-
Raspberry Pi Zero 2 W
₹6,999.00₹4,999.00Add to cart- Raspberry Pi-designed System-in-Package, which integrates the BCM2710A1 die used in Raspberry Pi 3 with 512MB of RAM.
- HAT-compatible 40-pin header
- Composite video and reset pins via solder test points
- CSI camera connector
- VideoCore IV GPU
