- Wide Compatibility: Supports 1-8S LiPo batteries, ideal for drones, RC cars, boats, and other hobby electronics.
- Clear LCD Display: Easy-to-read display shows individual cell voltage and overall battery voltage for real-time monitoring.
- Accurate Voltage Measurement: Provides precise voltage readings with accuracy to within ±0.01V for each cell.
- Built-in Alarm: Alerts you when any cell voltage falls below a safe threshold to prevent over-discharge and battery damage.
- Compact & Portable: Lightweight and small design for easy portability and storage in your toolkit or carrying case.
- Simple to Use: Plug-and-play operation with no complicated setup required, making battery voltage checks quick and easy.
- Low Power Consumption: Energy-efficient, using minimal power from the connected battery during use.
- Durable & Reliable: Designed for long-lasting performance, ideal for monitoring the health of LiPo batteries.
- Versatile: Perfect for a wide range of battery-operated devices, from RC hobbies to drones and more.
- Power Source: Powered directly by the connected LiPo battery, no extra power source required.
Showing 1–25 of 187 results
-
1 x 18650 Battery Holder Case Black Plastic BH1 (Pack of 4)
₹149.00₹99.00Add to cart- Hold A standard 18650 Battery
- Wire : 15cm
- Output: 3.7v
- Dimension (Approx..): 76x20x20xmm
- Weight: 8gm
- High-quality plastic material
- Best for Arduino, power bank, And specially for lithium battery DIY work etc.
- Wires Color: red and black, the red cable contact the positive side of the aa battery holder case, and the black cable contact the negative side of the aa battery holder case.
- Package include :- 2X 18650 Battery Holder
-
1 x 18650 Battery Holder/ Spacer with 18.4MM Bore Diameter BHS1 (Pack of 100)
₹499.00₹229.00Add to cart- Very simple to operation
- Very flexible, it is easy to assemble any type of battery packs
- Radiating during high rate discharge.
- Makes your battery pack Solid and Reliable!
- Package Includes: 18650 1 ×Battery Cell Holder
-
1-8S LIPO BATTERY VOLTAGE TESTER with Buzzer Alarm BPVT
₹349.00₹199.00Add to cart -
11.1V 2200mAh Li-ion Battery Pack with Box
₹499.00₹349.00Add to cart- Output Voltage: 11.1V DC
- Output Current: 1A
- Battery Type: Li-Ion
- Charging Voltage: 12V
- Size: 76×61.8×25.8mm
-
12 Volt Inverter Battery Hydrometer Specific Gravity Tester (AXB-Medium Size, Black)
₹299.00₹149.00Add to cart- Fast & accurate testing of battery and fully tested
- Checks The Batteries For Bad Cells & Specific Gravity & condition of the battery
- Multi Colour coding for easy viewing & Easy to use
- Ball Material Type: Rubber
- Material: acrylic
-
12.6V BMS 3S 5A 18650 Lithium Battery Protection Board
₹249.00₹199.00Add to cart- Product model: HW-541
- Charging voltage: DC 12.6~14V
- Maximum working current: 4~5A
- Maximum instantaneous current: 6~7A
- Battery over-discharge voltage: 2.3~2.6V
- Battery over-discharge protection recovery voltage 4.1~4.2V
- Battery over-discharge current protection point: 5.5~6.5A
- Battery overcharge protection voltage point: 4.2~4.3V
- Battery overcharge protection recovery voltage: 4.1~4.2V
-
1200mAh 3.7 Volt Lithium-ion 18650 Rechargeable Battery
₹99.00₹59.00Add to cart- 3.7V 1200 mAh 18650 Hongli lithium ion battery
- We have following batteries in stock:
- We are stockist of Hongli lithium ion batteries.
- 35gm weight
- Rechargeable
-
12V 1.3A Rechargeable Valve Regulated Lead Acid (VRLA) Battery LAB1213
₹999.00₹525.00Add to cart- Voltage: 12 volts – Provides a stable 12V output for various applications.
- Capacity: 1.3 ampere-hours (Ah) – Delivers 1.3 amps for one hour or 0.13 amps for ten hours before needing a recharge.
- Rechargeable: Designed for multiple charge and discharge cycles, offering long-term usability and cost efficiency.
- VRLA Technology: Sealed and maintenance-free with built-in gas recombination, preventing leaks and enhancing safety.
- Applications: Ideal for small UPS systems, emergency lighting, and portable electronics.
- Safety and Durability: Robust design with a pressure relief valve to manage gas buildup, ensuring reliable performance in various conditions.
-
12V 2.2A Rechargeable Valve Regulated Lead Acid (VRLA) Battery LAB1222
₹999.00₹625.00Add to cart- Voltage: 12V – Provides a stable 12-volt output.
- Capacity: 2.2Ah – Offers 2.2 ampere-hours of power.
- Rechargeable: Designed for multiple recharge cycles.
- VRLA Technology: Sealed, maintenance-free with gas recombination for enhanced safety.
- Safety Features: Includes a pressure relief valve to handle gas buildup.
- Durability: Built to withstand various environmental conditions.
- Applications: Suitable for small UPS systems, emergency lighting, and backup power for various devices.
-
12V 4.5A Rechargeable Valve Regulated Lead Acid (VRLA) Battery LAB1245
₹1,999.00₹749.00Add to cart- Voltage: 12V – Provides consistent 12-volt power.
- Capacity: 4.5Ah – Delivers 4.5 ampere-hours of energy.
- Rechargeable: Designed for multiple charge and discharge cycles.
- VRLA Technology: Sealed and maintenance-free with gas recombination.
- Safety Features: Equipped with a pressure relief valve for gas management.
- Durability: Robust construction for reliable performance in various conditions.
- Applications: Ideal for small UPS systems, emergency lighting, and backup power.
-
12V 7.5A Rechargeable Valve Regulated Lead Acid (VRLA) Battery LAB1275
₹1,999.00₹949.00Add to cart- Voltage: 12V – Delivers steady 12-volt power output.
- Capacity: 7.5Ah – Provides 7.5 ampere-hours of energy, supporting longer runtimes.
- Rechargeable: Built for multiple charge and discharge cycles, offering extended usability.
- VRLA Technology: Sealed, maintenance-free design with gas recombination for enhanced safety.
- Safety Features: Includes a pressure relief valve to manage gas buildup.
- Durability: Engineered for reliable performance in a range of environmental conditions.
- Applications: Suitable for small UPS systems, emergency lighting, and backup power for various devices.
-
1500mAh 3.7Volt Lithium-ion Battery 18650 Rechargeable Battery
₹199.00₹75.00Add to cart- Battery specification: 18650-1S1P-1500mAh-3.7V
- Nominal voltage: 3.7V
- Nominal capacity: 1500mAh
- Cut-off Charging voltage: 4.2V
- Charging current: ≤1500mA
- Standard discharging current: 1500mA
- Instant discharging current: 4500mA
- Cut-off discharge voltage: 3.0VInternal resistance: ≤150mΩ
- Charging temperature: 0～45℃
- Discharging temperature: -20～60 ℃
- Storage temperature: -20℃～35℃
-
1500mAh PCM Protected Micro Li-Po Battery
₹299.00₹210.00Add to cart- Product: Small Li-Po Battery
- Voltage: 3.7V
- Capacity: 1500mAh
- Discharge Rate: 0.5C
- Weight: 28g
- Dimensions: 48 x 30 x 10mm
- Best for IoT Applications, Portable devices
-
150mAh 3.7V Rechargeable Replacement Battery
₹299.00₹225.00Add to cart- Capacity: 150mAh
- Voltage: 3.7V
- Type: Rechargeable Lithium-ion
- Compatibility: Ideal for [specific device/model]
- Long-Lasting Power: Reliable performance and extended usage
- Compact Design: Fits easily into your device
- Safety Features: Overcharge and discharge protection
- Easy to Install: Simple replacement process
- Environmentally Friendly: Reduces waste by using rechargeable technology
-
18650 Li-ion 2200mAh 11.1v 3S1P Protected Battery Pack-1with DC Jack Male & Female
₹1,999.00₹1,500.00Add to cart- Model No: ORANGE 18650
- Weight: 190g
- Voltage: 11.1V
- Connector: DC Jack Male & Female
- Cell: 3S1P
- Good Temperature Control
-
18650 x 2 Battery Holder With Cover and On/Off Switch BH2C (Pack of 2)
₹99.00₹75.00Add to cart- Holds 2 x 18650 Batteries
- With a Cover and Locking
- Comes with an ON/OFF switch
- Internal Connection: Series
- Pre-soldered wire tips
-
18650-2 CELL SPACER WITH 18.4MM DIA BHS2
₹199.00₹99.00Add to cart-
These battery holders are designed to maximize the packing density of an 18650 battery pack
-
It is made of high quality plastic and is small in size and easy to store.
-
Package: 2-Cell 18650 lithium batteries spacer plastic holder bracket
-
Easy to assemble any type of battery pack
-
Please note, installation requires top and bottom piece to work
-
-
18650×2 CELL HOLDER OPEN WITH WIRE PARALLEL BH2P (Pack of 2)
₹99.00₹49.00Add to cart- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Approx.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
-
18650×2 CELL HOLDER OPEN WITH WIRE SERIES BH2 (Pack of 2)
₹99.00₹49.00Add to cart- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Approx.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
-
18652 x 3 CELL HOLDER OPEN WITH WIRE PARALLEL BH4P (Pack of 2)
₹149.00₹65.00Add to cart- 18650 Battery Holder Wire Leads – All 18650 battery case holder with leads, they are tinned wire end, the black and red two wire design is great for easily soldering and connecting. Wire Length: approx 5.1inch.
- Multipurpose Battery Case Holder – 18650 battery holder with soldering pins is designed for 3.7V 18650 rechargeable batteries，Case for rechargeable battery.
- Simple DIY recharge power supply.Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
- Design – Metallic spring with pin design for easy install and convenient for electric circuit DIY work.Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
- Material – Great items for keeping your standard or rechargable batteries together and safe.Wire lead battery case holder for 18650 single battery,Durable plastic and metal.Note – For flat top 18650 Li-Ion batteries only,length 67mm max.(Battery is not included here).
-
18652 x 3 CELL HOLDER OPEN WITH WIRE SERIES BH3 (Pack of 2)
₹149.00₹65.00Add to cart- 18650 Battery Holder Wire Leads – All 18650 battery case holder with leads, they are tinned wire end, the black and red two wire design is great for easily soldering and connecting. Wire Length: approx 5.1inch.
- Multipurpose Battery Case Holder – 18650 battery holder with soldering pins is designed for 3.7V 18650 rechargeable batteries，Case for rechargeable battery.
- Simple DIY recharge power supply.Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
- Design – Metallic spring with pin design for easy install and convenient for electric circuit DIY work.Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
- Material – Great items for keeping your standard or rechargable batteries together and safe.Wire lead battery case holder for 18650 single battery,Durable plastic and metal.Note – For flat top 18650 Li-Ion batteries only,length 67mm max.(Battery is not included here).
-
1A Li-Ion Lithium Battery charging Module with Current Protection – Micro USB TP4056
₹199.00₹99.00Add to cart- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
-
1A LIPO BATTERY CHRG BOARD USB C TYPE TP4056C
₹99.00₹59.00Add to cart- 1A Charging Current: Provides up to 1A of charging current, suitable for small to medium-sized LiPo batteries.
- USB-C Input: Modern USB-C port for fast and efficient charging, compatible with most USB-C chargers.
- Safety Features: Built-in protection circuits prevent overcharging, overheating, and short circuits for safe charging.
- LED Charging Indicator: Features LED lights to easily show the charging status (charging or fully charged).
- Compact & Lightweight: Small form factor makes it ideal for integration into DIY projects and portable applications.
- Overcharge Protection: Automatically stops charging once the battery is fully charged to ensure battery longevity.
- Wide Compatibility: Works with a range of LiPo batteries, commonly used in drones, robotics, and remote-controlled devices.
- Efficient Design: High-efficiency charging with minimal heat generation, ensuring fast and safe battery charging.
- Plug & Play: Easy to use with USB-C for simple and quick setup with no complex installation required.
-
1S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
₹199.00₹159.00Add to cart- The intelligent power display panel
- Static power consumption 2~3 mA
- Colour Display
- Wide Variety of application
-
2 SERIES 20A 18650 PCM 7.4V BP220
₹299.00₹129.00Add to cart- Note: This can not be used in lithium iron phosphate battery protection board, hernia lamp, hand electric drill battery, electric fish electromechanical ChiZu, electric bicycle batteries, car batteries, children (4 a) more than 775 motor, fisheye 1 w LED lamp,The lithium battery protection board properties: Model: HX-2S-D20 overcharge voltage range: 4.25-4.35v ± 0.05v Size: 46 * 20 * 3.6mm over discharge voltage range: 2.5-3.0v ± 0.05v
- The lithium battery protection board properties: Model: HX-2S-D20 overcharge voltage range: 4.25-4.35v ± 0.05v Size: 46 * 20 * 3.6mm over discharge voltage range: 2.5-3.0v ± 0.05v
- Upper working current: 13A Operating temperature: -40 — + 50 ? Upper limit instantaneous current: 20A Storage conditions: -40– +80 ? Quiescent current: less than 10uA Effective life: more than 50,000 hours Internal resistance: less than 300m? Short circuit protection: can be protected, need to charge recovery
- Charging voltage: 8.4V-9V The protection board size and device description. The protective plate size is 46 * 20 * 3.6mm
- Welding point Description: B + Connected to the battery positive. B – The battery negative. MB connects the battery 1 to the connection point before the battery 2. P + Connected to the charge / discharge side of the positive (charge side /discharge side shared); P – Connect / discharge terminal negative ( shared with charge / discharge).
