Showing all 15 results
-
Acrylic Case Suitable for Raspberry Pi4 and 3.5 inch LCD
₹299.00₹249.00Add to cart- This simple case provides tough protection for your raspberry pi along with 3.5 inch LCD
- High-Quality Acrylic Construction
- Click together design, no screws, standoffs, or elastic bands required
- It is easy to use. You just need to click them together
-
CARTOON ULTRASONIC SENSOR BRACKET FOR HCSR04 SR04B
₹99.00₹49.00Add to cart- Acrylic Body.
- Easy to install.
- Attractive blue color.
- 1 x Cartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
- 9 × 6 × 4 cm
-
Raspberry Pi 3 – Model B+ – 1.4Ghz 64Ghz Processor with 1 GB Ram (Original)
₹9,999.00₹8,499.00Add to cart- Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoC
- Memory: 1GB LPDDR2 SDRAM
- Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac
- Ethernet: Gigabit Ethernet over USB 2.0 (300Mbps max)
- USB: Four USB 2.0 ports
- Connection: GPIO Header 40-pin
- HDMI: 1 x full size
- Video: MIPI DSI display port, MIPI CSI camera port & 4 Pole stereo output and composite video port
- Multimedia: H.264, MPEG-4 decode (1080p30). H.264 encode (1080p30). OpenGL ES 1.1, 2.0 graphics.
- Storage: microSD card slot for loading operating system and data storage
- Power: USB connector for 5.1V / 2.5A dc
- POE enabled
-
Raspberry Pi 4 Case Enclosure Official Red & White RPCASE4
₹599.00₹199.00Add to cart- Optional clip-on lid provides protection, but can be removed if you are using a HAT
- All primary ports (including micro-SD) accessible
- Removable side plate allows access to those wonderful GPIO pins
- Snug and secure fit protects your Pi 4 while looking great
- Anti-slip feet keeps your Raspberry Pi 4 stable
- Power and activity lights still visible through the end of the case
-
RASPBERRY PI FOUR 8 GB RAS48
₹14,999.00₹9,999.00Add to cart- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port
- Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
-
RASPBERRY PI OFFICIALS CASE 3B/3B+ RPCASEO
₹229.00₹119.00Add to cart- Dimensions: 96mm x 70mm x 25mm
- Allows easy access to camera, display ports and attached Raspberry HAT device
- Removable GPIO side is provided for easy access to the 40-Pin GPIO port
- Official enclosure from the Raspberry Pi foundation – 5 part enclosure with removable lid and sides
-
Raspberry PI PICO H (with Soldered Headers) (RPICOH)
₹999.00₹499.00Add to cart- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
-
Raspberry Pi Pico W Wifi RPICOW
₹1,299.00₹799.00Add to cart- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB port for power and data (and for reprogramming the flash)
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- It can be surface-mounted as a module
- 3-pin Arm serial wire debug (SWD) port
- Simple yet highly flexible power supply architecture
- High quality, low cost, high availability
-
Raspberry Pi Zero 2 W
₹6,999.00₹4,999.00Add to cart- Raspberry Pi-designed System-in-Package, which integrates the BCM2710A1 die used in Raspberry Pi 3 with 512MB of RAM.
- HAT-compatible 40-pin header
- Composite video and reset pins via solder test points
- CSI camera connector
- VideoCore IV GPU
-
RASPERRY PI ACRYLIC CASE RPCASE
₹229.00₹119.00Add to cart- Acrylic case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble without any Screws or Nut-Bolts
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Mounting holes and anti-slip rubber feet at the back.
-
SanDisk 16GB Ultra microSDHC UHS-I Memory Card with Adapter – 98MB/s, C10, U1, Full HD, A1, Micro SD Card
₹851.00₹399.00Add to cart- Ideal for Android Smartphones and Tablets, and MIL Cameras
- Capacities up to 512GB (1GB=1,000,000,000 bytes; Actual user storage less) to store even more hours of Full HD video (Approximations; Results and Full HD (1920×1080) video support may vary based on host device, file attributes and other factors)
- Up to 98MB/s transfer read speed (Based on internal testing; Performance may be lower depending on host device, interface, usage conditions and other factors) lets you move up to 1000 photos in a minute (Based on 4.1GB transfer of photos (avg. file 3.5MB) with USB 3.0 reader; Results may vary based on host device, file attributes and other factors)
- Load apps faster with A1 rated performance (A1 Performance is 1500 read IOPS, 500 write IOPS; Based on internal testing; Results may vary based on host device, app type and other factors)
- Class 10 for Full HD video recording and playback (Full HD (1920×1080) video support may vary based upon host device, file attributes, and other factors)
- SanDisk Memory Zone app for Easy file management (Download and Installation Required)
- 10 year limited manufacturer warranty
- Order with your Alexa enabled device; Just ask ‘Alexa, order SanDisk microSD’
-
ST LINK V2 PROGRAMMER STV2
₹399.00₹199.00Add to cart- Programmer For: STM8 and STM32; PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable; Interface definition directly marked on the shell, clear, convenient, and practical
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V; Shell characters using laser engraving, never fade off! Permanent clarity; 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working conditions; With 4 DuPont lines, so you can easily respond to different target board line orders; Use anti-static bag packaging.
-
THICK ACRYLIC CASE SUITABLE FOR RASPBERRY PI3 3.5 INCH LCD RPD35C
₹299.00₹149.00Add to cart- Transparent acrylic cover for your Raspberry Pi 3/2 model B to protect your mainboard with the 3.5″ LCD touchscreen mounted.
- Made from thickened clear acrylic plate perfect match with the mainboard and give access to all ports, easy to use.
- Screw mounting design easy to install the best partner for your Pi.
-
USB AVR PROGRAMMER DOWNLOADER + CABLE AVRPU AVRPU
₹499.00₹299.00Add to cart- The USB AVR ISP programmer is designed ATMega8A-AU main chip that supports AVR, ASP and AT89S51/52 microcontroller.
- This USB programmer features an autospeed autofocus firmware that will automatically track the chip frequency and change speed to achieve speed control.
- This USB programmer can be powered by external power supply (target board) or from USB Port Autospeed control function for flashing devices to get the best performance/stability
- The output of the USB ATMEGA8 Programmer ATMEL standard port as it’s output port that features overcurrent protection.
- Supports SLOW function for special applications PTC fuse for protecting your USB power / computer
-
USB AVR PROGRAMMER WITH CASE AVRPUC
₹399.00₹299.00Add to cart- The well-configured firmware, the speed of the unique adaptive technology, stability and obtain the best balance between speed supports firmware upgrade unlimited.
- Colour may vary., Package contents: 1 USB ISP programmer development board.
