Showing 351–375 of 404 results
-
Sale!
₹399.00 ₹149.00
- Onboard TTP226 capacitive touch sensor IC
- 8 board-level status indicator
- Working voltage: 2.4V – 5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
- PCB board size: 47 (mm) x 46 (mm)
Add to cart
-
Sale!
₹399.00 ₹139.00
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
Add to cart
-
Sale!
-
Sale!
₹899.00 ₹299.00
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Cable length:10 cm Separated 18 x 18mm GPS antenna.
Add to cart
-
Sale!
₹299.00 ₹99.00
- Stepper Motor Control: Designed specifically for controlling stepper motors, making it ideal for robotics and automation projects.
- Compatible with 28BYJ-48: Works seamlessly with the widely used 28BYJ-48 stepper motor, ensuring reliable performance.
- High Current Capability: Supports up to 500mA per channel, providing robust power handling for various motor applications.
- Easy Wiring: Clearly labeled input and output pins for straightforward connections, simplifying installation and troubleshooting.
- Integrated Protection: Built-in protection diodes prevent back EMF from damaging the driver, ensuring durability and longevity.
- Compact and Lightweight: Small form factor allows for easy integration into tight spaces or portable projects.
- Wide Voltage Range: Operates on a voltage range of 5V to 12V, offering versatility for different power supply configurations.
- Ideal for Prototyping: Perfect for hobbyists and engineers working on prototypes or DIY projects involving stepper motors.
- Cost-Effective Solution: Affordable pricing without compromising on quality, making it accessible for various users.
Add to cart
-
Sale!
-
Sale!
₹699.00 ₹299.00
- Working Voltage : 3 – 5.5V.
- The maximum Current : 30mA 5V.
- Standby current : < 2mA 5V.
- Low power consumption : <20uA.
- The fastest range is : 8 meter
- Dead zone : 20cm.
- Resolution: 1mm
- Mileage angle: 70 degrees
- Range : 25cm to 450cm
Add to cart
-
Sale!
₹199.00 ₹79.00
- Supply Voltage: -0.3V ~ +5V; 1.3V to 3.3V operating voltage and low power consumption; Level-hold mode to play repeatedly
- One-shot or level hold mode; Plays a melody consisting of 64 note; RC oscillator on chip; Operating Ambient Temperature: -10°C ~ +60°C; Storage Temperature: -55°C ~ +125°C
- 64-note ROM memory; Sound range: 2 octaves; Tempo: 15 kinds (presto-largo); Package: TO-92
- Direct Piezo drive; Solutions of automatic stop or repeat of the melody; The dynamic speaker can be driven with an external NPN transistor
- Applications Include: Alarm, Toy applications
Add to cart
-
Sale!
₹399.00 ₹199.00
- Supply Voltage: 3.3 V/ 5V.
- Interface Type: I²C, SPI.
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
- Sensitivity:
- X: 28.6 LSB/g.
- Y: 31.2 LSB/g.
- Z: 34.5 LSB/g.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
Add to cart
-
Sale!
₹329.00 ₹289.00
- Compatible Chips:
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
Add to cart
-
Sale!
₹499.00 ₹199.00
- Before you start using your adapter, disable all existing Bluetooth devices (both built-in and third party) from the Device Manager on Windows. We are trying to send USER MANUAL by email to each customer. Please refer to the USER MANUAL in your email box in case of any issue. Please also note that this is NOT SUITABLE FOR MAC IoS and Linux
- The Bluetooth dongle applies the latest Bluetooth 5.3 Chipset, enhancing your PC Bluetooth capability in wider transmission up to distance 22M (66ft.) and maximum transfer rate up to 3Mbps, lower power consumption with 2.4Ghz~2.4835Ghz frequency range. Backward compatible with Bluetooth 2.0/2.1/3.0/4.0/4.2.
- No need for manual driver installation, just plug in the Bluetooth adapter to your PC, and you can leave it there and start to enjoy the extreme experience of the high-performance BT 5.3 dongle brings.
- Work with most computer brands, once plugging the Bluetooth Dongle, simply connect PC with speakers, headphones, keyboards, mice via Bluetooth (Not compatible with stereo systems, PS4 or TVs)
- Extremely mini dongle, allows you to plug it there and no need to remove, without taking space of surrounding USB ports. Small size but powerful function, USB Bluetooth adapter for PC connects with Bluetooth headphones or speakers for stereo music wireless streaming, plug it in and enjoy fluent music and talking experience .
Add to cart
-
Sale!
₹199.00 ₹59.00
- Input Type: USB- Female
- Board Sze: 17 mm x 17 mm
- Weight: 3gm
Add to cart
-
Sale!
₹149.00 ₹99.00
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Baud Rate Range: 75bps – 115200bps, up to 6Mbps
- Supports Plug, Play and hot-swap ( USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
Add to cart
-
Sale!
₹199.00 ₹89.00
- All kinds of satellites set-top box upgrade
- Router, HDD, ADSL, broadband modem firmware upgrade or cracked upgrade
- cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on
- Burn write STC MCU, NXP MCU, Renesas MCU, NEC MCU and so on
- Simple UART communication commonly used UART debugging tools in supper terminal
- USB signal transferred to TTL signal may be used by electronic enthusiasts
Add to cart
-
Sale!
₹199.00 ₹129.00
- CP2102 chip is a single chip USB to UART bridge IC. It requires minimal external components. It can be used to migrate legacy serial port based devices to USB.
- Stable and reliable chipset | USB specification 2.0 compliant | X-On/X-Off handshaking supported | Event character support Line break transmission | Standard USB type A made | TTL 5-pin connector | Asynchronous serial data bus | LED power, data reception and transmission indicators | Self-recovery fuse
- LxWxH : 42 x 16 x 6 mm
- CP2102 can be used to migrate legacy serial port based devices to USB. It can be used to program and/or communicate with a GPS/GSM module through AT commands. It is commonly used when microcontrollers have to communicate with computers via serial communication.
- USB specification : 2.0 compliant with full-speed 12 Mbps Standard USB : type A male TTL : 5 pin connector Number of pins : 5 pins for 3.3V, RST, TXD, RXD, GND and 5V Baud rate : 300 bps to 1.5 Mbps Byte receive buffer : 640 byte transmit buffer Temperature Range : -40 to +85
Add to cart
-
Sale!
₹199.00 ₹69.00
- Connector Type: USB Type -B
- Compatible Devices: Printer Dev. Board etc
- PCB Size: 20 x 20 mm
- Weight: 4gm
Add to cart
-
Sale!
₹199.00 ₹99.00
Features
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap ( USB side) ;
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM, with the anti-jamming performance of the industrial site
- No need external power, powered by USB port
Applications
- All kinds with RS485 port device parameter settings, data communication
- LED display of communication data
- Machine PLC data reading and writing
- Monitoring data read and write, and PTZ control
- Centralized control of household electrical appliances
- Access Control System card
Add to cart
-
Sale!
₹399.00 ₹99.00
- Driver Chip: CH340G
- Supports all basic windows versions.
- The adapter plate integrated 1000μF solid capacitors to ensure the current supply
- The power supply will not be a problem to make WIFI module crashes unresponsive.
- Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
- Using CH340 turns serial port chip for stable performance and compatibility.
- Supports all basic windows versions.
- The adapter plate integrated 1000F solid capacitors to ensure the current supply
- The power supply will not be a problem to make WIFI module crashes unresponsive.
- Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
- The interposer board is specifically designed for ESP8266 The USB Turn serial port.
Add to cart
-
Sale!
₹399.00 ₹199.00
- Fully integrated miniature module
- 940 nm laser VCSEL
- VCSEL driver
- Ranging sensor with advanced embedded microcontroller
- 4.4 x 2.4 x 1.0 mm
- Fast, accurate distance ranging
- Measures absolute range up to 2 m
Add to cart
-
Sale!
₹99.00 ₹49.00
- Input Voltage: 0 to 25V
- Voltage Detection Range: 0.02445 to 25
- Analog Voltage Resolution: 0.00489V
- Needs no external components
- Easy to use with Microcontrollers
Add to cart
-
Sale!
₹199.00 ₹139.00
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
Add to cart
-
Sale!
₹499.00 ₹329.00
- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tax/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- Factory and Building Automation
- Medical Monitoring Equipment
Add to cart
-
Sale!
₹499.00 ₹349.00
- Heavy Aluminium build
- Internal flow channel extrusion forming
- Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling
Add to cart
-
Sale!
₹299.00 ₹149.00
- Cable Length: 30.5(cm)
- Maximum Load: 50 W
- Max Switching Voltage: 100V DC
- Minimum Voltage: 250V DC
- Maximum Switching Current: 0.5 A
- Max Load Current: 1.0 A
- Max Contact Resistance: 0.4 ΩTemp Rating: -20~ 80 degree
Add to cart
-
Sale!
₹999.00 ₹399.00
- Flow range:1-60L/min
- Allow compression:Water pressure 1.75 Mpa below
- Working voltage range:DC 5-18 V
- Output Waveform:Square Wave,output pulse signal.
- Sensor:Hall effect
Add to cart