Showing 276–300 of 400 results
-
QBM “Bluetooth Stereo Audio Receiver Ver 3.0 Type 1”
₹299.00₹99.00Add to cart- Bluetooth 3.0 with audio signal decoding feature.
- The output is directly compatible with the amplifier.
- Very little weight and small size form factor make it easily fits into any application area.
- Can be used to Design your own wireless music system
- Low power consumption.
- 3.7v-4V voltage supply.
-
QBM Magnetic Float Sensor FS37A (Vertical) (Pack of 1)
₹599.00₹220.00Add to cart- Liquid level measurement in hostile environments
- For use in many toxic and corrosive chemicals
- Tanks where up to three switch points are needed
- Situations where vertical space is limited
- Package contents: 1 x magnetic float sensor
-
Qiachip Wireless 433MHZ RF Module With Mosfet RXL004
₹499.00₹189.00Add to cart- Wireless Device Control: This MOSFET QIACHIP Enable remote operation of connected devices using the RF remote control.
- Efficient ON/OFF Operation: Facilitates comfort switching ON or OFF of electric appliances.
- MOSFET based Output Control: Provides reliable and stable control over connected devices using MOSFET technology.
- Versatile Device Compatibility: This MOSFET QIACHIP can Works easily with various electric appliances for flexible use.
- Remote Accessibility: Allows users to control devices from a distance, enhancing comfort in device management.
-
QMC5883L 3 AXIS MODULE MAGNETIC FIELD SENSOR GY273
₹399.00₹199.00Add to cart- QMC5883L module (three-axis magnetic field module)
- Model: GY-273
- IC: QMC5883L
- I2C interface
- 1-2 degree heading accuracy
- Integrated 12-bit ADC
- 160Hz max data rate
- A range of -8 to +8 Gauss
-
RAIN DROP DETECTION SENSOR AB055
₹199.00₹99.00Add to cart- Comparator output, clean signal, good waveform, strong driving ability, over 15m
- . Equipped with potentiometer to adjust sensitivity
- Working voltage 3.3V-5V
- Output format: Digital switch output (0-1) and analog AO voltage output
- Equipped with fixed bolt holes for easy installationModule size: 3.2 * 1.4CM
- Using a wide voltage LM393 comparator
-
Range Current Sensor 30A ACS712C
₹299.00₹199.00Add to cart- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
-
RANGE CURRENT SENSOR 5A ACS712
₹199.00₹129.00Add to cartThе ACS712 5A Rangе Currеnt Dеtеctor Sеnsor Modulе is an еssеntial and highly prеcisе componеnt dеsignеd for mеasuring еlеctrical currеnt in a widе rangе.
-
Raspberry PI Camera 5MP RPCAM
₹899.00₹499.00Add to cart- Fully Compatible with Both the Model A, Model B and Model B+ Raspberry Pi
- 5MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight 3g
-
Raspberry Pi Zero Camera Cable
₹499.00₹199.00Add to cart- FPC (Flexible Printed Circuit) cable.
- Length: 15cm.
- Ways: 15-way.
- Pitch: From 0.5mm(Raspberry Pi Zero) to 1.0mm (Raspberry Pi Camera and Raspberry Pi 3).
-
RC522 RFID 13.56MHZ Reader Writer Module
₹149.00₹110.00Add to cart- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Suitable for Smart meters and portable handheld devices.
- Advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols.
- 14443A compatible transponder signals.
- ISO14443A frames and error detection.
-
RC522 RFID Card Reader Module 13.56MHz
₹199.00₹149.00Add to cart- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card）
-
RCWL-0516 Microwave Induction Switch Sensor R0516
₹199.00₹99.00Add to cart- Transmission signal processing control chip RCWL-9196
- Wide operating voltage range 4.0V to 28.0V
- Penetrating detection capability, compared with the traditional infrared feeling PIR
- Adjustable Block time and distance
- Operating Current: 2.8mA (typical); 3mA (max)
- Detection Distance: 5-9m
- Transmitting Power: 20mW (typical); 30mW (max)
-
Reed Magnetic Switch Sensor Module
₹99.00₹59.00Add to cart- Open reed switch
- Working voltage: 3.3V ~ 5V
- Current: Upto 1.2A
- Comparator output, clean signal, great waveform, and strong driving ability
- Digital switch output (0 and 1)
- Fixed bolt hole for easy installation
-
RF Module TX RX 433 Without IC RF12ED
₹399.00₹199.00Add to cart- Wide input supply (2.5 V to 12V)
- Easy to integrate (V+, GND, and Data)
- The device in deep sleep mode when Data pin is grounded
- Very small dimension.
-
RXB6 433Mhz Super Heterodyne Wireless Receiver Module RXB6
₹399.00₹199.00Add to cart- RXB6 433MHz Superheterodyne Wireless Receiver Module
- receiver sensitivity reach -116dBm
- Operating frequency:433.92 MHz
- Power supply voltage input range: 3V-5.5V
- Low power consumption, 3.3V @ 433.92MHz, 6.0mA
-
SIM800C GSM GPRS SHIELD S800C
₹1,499.00₹899.00Add to cartSIM800C GSM GPRS SHIELD Modem for SMS, Voice, Data, and GPRS with Low Power Consumption and Microcontroller Compatibility
-
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-Band TTL Serial Port S800S
₹399.00₹299.00Add to cart- Module: sim800l quad-band 850/900/1800/1900mhz
- Supply voltage range: 3. 4V ~ 4. 4V
- Gprs multi-slot class12 connectivity: max. 85
- Compact size: 23mm x 35mm x 5. 6Mm
- Real time clock
-
SIM900A V4.0 GSM GPRS Wireless Kit S900A
₹699.00₹399.00Add to cart- The onboard SMA (default) and IPXmini antenna interface, SIM900A interface reserved reset.
- The size of the module is 49*50, all the new and original device.
- The computer can give early computer debugging USB module power supply, a very large amount of data under the condition of the recommended current more than 1A.
- Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power. Support 2, mobile phone 3,4G card.
- The serial port circuit: support for 3.3V single chip microcomputer. TTL serial port support
- 3 and 5V single chip microcomputer.
- The SIM card circuit to increase the SMF05C ESD chip.
- Antenna circuit: guarantee short and straight, so as to ensure the signal strength.
PCB display screen printing mark: each interface, convenient development two times, the SIM900/A hardware is completely following the design when the design manual. - Two power supply interfaces: VCC5, 5V DC above 1A. Computer 5V power supply can be early computer USB. DC long data circuit over larger recommended 5V1A. VCC4, 3.5–4.5V power supply, ibid., suitable for lithium battery.
-
SINGLE BUTTON MIRROR TOUCH SENSOR SWITCH 3A MT1B3
₹399.00₹199.00Read more- Working voltage: DC12-24V 3Amp
- Load type: LED lamps and various household appliances
- Load power: ≤36W
- Touch head: 50X34X10mm
- This switch is an isolated touch sensor switch, suitable for all kinds of lamps with medium (such as glass, acrylic, plastic, ceramic, etc.)
- LED can be made ON-OFF just by a single touch.
- Sensitive to touch
- Lighting control
- LED’s intensity can be altered.
- Easy to connect with LED.
-
SINGLE BUTTON MIRROR TOUCH SENSOR SWITCH 5A MT1B5
₹599.00₹399.00Read more- Mirror touch dimmer switch,dimmable touch sensor switch for
- hotel bathroom,smart touch switch,
- mirror light touch sensor switch
- Loading Power:≤50W
- Current: <5A
- Suitable for Two LED on/off and Dimmer
-
SINGLE BUTTON MIRROR TOUCH SENSOR SWITCH E 4A MT1B4
₹599.00₹299.00Read more- Suitable for DC 12V power supply
- reliable, easy to install, sensitive to touch
- Lighting control
- Anti fog control
- Sleep mode（Long touch to turn off button backlight ）
- Connect the black and red wires to the power input of the switch and another set of red and blue wires as the output of the light bar.
- Design a touch point on the mirror surface. Contact size is 15 ~ 20mm. First, get rid of the lens contact point. The width of the column is preferably 1.5-2CM. Removing is just a backlight. Clear, touch position at a glance, both beautiful and easy to find the touch switch position.
- When installing the switch, draw a center cross line on the contact point. There are three arrow lines on the switch box.
- Do not need to touch metal parts through glass. Induction trigger switch work, touch function, high safety performance.
- This switch is isolated touch sensing switch, suitable for all kinds of media (such as glass, acrylic, plastic, ceramic, etc.) lamp body lamps
-
Sip To Ethernet TCP/IP Network Module Mini W5500M
₹699.00₹399.00Add to cart1. 80MHz high-speed SPI interface2. Built-in hardware TCPIP protocol stack, users need almost no knowledge of complex network protocols3. Support up to 8 Socket connections4. Support TCP, UDP, ICMP, IPv4, ARP, IGMP, Pepo protocol5. Integrated data link layer, physical layer6. Support power-down wake up7. Support high-speed serial peripheral interface (SPI mode 0~3)8. Internal 32K byte send and receive buffer9. Embedded 10BaseT/100BaseTX Ethernet Physical Layer (PHY)10. Support auto-negotiation (10/100-Based full/half-duplex)11. IP fragmentation is not supported12. 3.3V working voltage, I/O signal port 5V withstand voltage13. LED status display (full-duplex / half-duplex, network connection, network speed, active status)14. Ultra-small pin package for easily embedded applications15. Provide C application routines -
Small Microphone Sound Sensor Module AB003M
₹199.00₹89.00Add to cart- There is a mounting screw hole 3mm.
- 5v DC power supply
- With analog output
- There are threshold level output flip
- Power indicator light
- The comparator output is light
- High Sensitivity Sound Microphone Sensor Detection Module
- Electric condenser microphone
- Low-level output signal used for sound control light
-
SMART MECHANICAL GAS VALVE SHGAS
₹2,999.00₹1,999.00Read more- Remote Control: Manage and monitor gas flow remotely via a smart app or web interface.
- Automatic Shutoff: Automatically shuts off gas supply in case of leaks or emergencies for safety.
- Energy Efficient: Optimizes gas consumption to reduce waste and improve overall system efficiency.
- Leak Detection: Built-in sensors to detect gas leaks and send instant alerts.
- Durable Construction: Made from high-quality, corrosion-resistant materials for long-lasting performance.
- Manual Override: Manual control option in case remote or automated control is unavailable.
- Precision Flow Control: Fine-tune gas flow for improved system performance.
- Compatibility: Works with a wide range of gas-powered appliances and systems.
- User-Friendly Interface: Simple and intuitive app interface for easy installation and operation.
- Weatherproof Design: Suitable for both indoor and outdoor use, resistant to environmental conditions.
- Pressure Rating: Supports up to 5 bar of pressure (depending on the model).
- Temperature Range: Operates effectively from -10°C to 70°C.
- Connectivity: Available in Wi-Fi, Bluetooth, or Zigbee for smart home integration.
- Safety Features: Includes overpressure protection and emergency shutoff capabilities.
- Certifications: CE, UL, ISO9001 certified for safety and quality.
- Applications: Ideal for residential, commercial, and industrial gas systems, including heating and kitchen appliances.
