Showing all 12 results

  • Sale!
    Add to wishlist
    Quick View

    ENC28J60 Ethernet LAN Module E28J60

    ₹499.00 ₹329.00
    1. ENC28J60 Ethernet chips, SOP28 package
    2. SPI Interface
    3. 1×10 connector, can be easily mounted with the MCU
    4. Built-in isolation transformer RJ45 connectors HR911105A
    5. Power LED
    6. Single Supply: +3.3 V
    7. 25Mhz Crystal
    8. PCB size: 48×18 mm  
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP-01 ESP8266 SERIAL WIFI MODULE ESP01

    ₹299.00 ₹149.00
    1. Wi-Fi Direct (P2P), soft-AP
    2. Integrated TR switch, balun, LNA, power amplifier and matching network
    3. Integrated PLLs, regulators, DCXO and power management units
    4. +19.5dBm output power in 802.11b mode
    5. Power down leakage current of <10uA
    6. 1MB Flash Memory
    7. Dimensions: 25 x 15 x 11 mm (LxWxH)
    8. PCB Thickness: 1mm
    9. Weight: 2 gm
    10. Integrated low power 32-bit CPU could be used as application processor
    11. SDIO 1.1 / 2.0, SPI, UART
    12. STBC, 1×1 MIMO, 2×1 MIMO
    13. A-MPDU & A-MSDU aggregation & 0.4ms guard interval
    14. Wake up and transmit packets in < 2ms
    15. Standby power consumption of < 1.0mW (DTIM3)

     

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP-12 D1 MINI V2-MINI NODE MCU 4M BYTES LUA WIFI WED1M

    ₹399.00 ₹209.00

     

    1. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
    2. 1 analog input(3.2V max input)
    3. Micro USB connection
    4. Use BRT (Bias Resistor Transistor), easier into flash mode.
    5. 30% increase in radiating area, more stable.
    6. Dimensions : 35 x 26 x 8 (LxWxH) mm.
    7. Weight: 10 gm.
    8. Board Color : Blue
    9. Compatible with Arduino
    10. Compatible with NodeMCU
    11. Compatible with MicroPythonz
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP-12E ESP8266 SERIAL WIFI MODULE ESP12

    ₹299.00 ₹159.00
    1. Communication Interface Voltage: 3.3V
    2. Working Current: 240mA(MAX)
    3. Serial Port Baud Rate: 115200 (Default), can be modified to other values by AT command
    4. Serial Communication Format: 8N1
    5. Wireless Network Mode: Station / Sofa / Sofa station
    6. Wireless Criteria: 802.11 b / g / n
    7. WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
    8. 19.5dBm output power
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    ESP-12F ESP8266 Wifi Wireless Module ESP12F

    ₹399.00 ₹159.00
    1. Communication interface voltage: 3.3V
    2. Working current: 240mA(MAX)
    3. Serial port baud rate: 115200 (default), can be modified to other values by AT command
    4. Serial communication format: 8N1
    5. Wireless Network Mode: station / softAP / SoftAP + station
    6. Wireless criteria: 802.11 b / g / n
    7. Compatible with ESP-12（ESP-202）
    8. WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
    9. It is very easy to develop projects with AT commands
    10. Surface Mount Package with 2mm Pitch Pads
    11. Mulitple GPIO’s for all your sensor needs
    12. Wi-Fi Direct (P2P), soft-AP
    13. -MPDU & A-MSDU aggregation & 0.4ms guard interval
    14. Wake up and transmit packets in < 2ms
    15. Standby power consumption of < 1.0mW (DTIM3)
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Ethernet Shield Wiznet W5100 for Arduino Uno Mega 1280 2560 Micro Sd Card W5100

    ₹799.00 ₹649.00
    1. does not come with MAC address, you can define any MAC Address in your uno code and it will work fine.
    2. This Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your for Arduino Online.
    3. It is directly supported by For Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network.
    4. It is compatible with for Arduino Duemilanove (168 or 328),
    5. Uno as well as Mega (1280/2560) and can be accessed using the SD library.
    6. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
    7. It supports up to four simultaneous socket connections.
    8. Use the Ethernet library to write sketches which connect to the internet using the shield.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    SIM800C GSM GPRS Shield S800C

    ,
    ₹1,499.00 ₹899.00
    1. Chip used: QUAD BAND SIM800C GSM CHIP.
    2. Arduino compatibility: Arduino UNO R3, Arduino Mega etc.
    3. Antenna type: finger antenna.
    4. Output: TTL and RS232 serial output.
    5. Sircar holder: standard size.
    6. Buzzer for CALL and SMS indication.
    7. Indication LEDs
      PWR Power Indication
      STS Status Indication
      NTW Network Indication
    8. PINOUTS:
      o2 RX
      o3 TX
    9. Provision for the headphone jack, mic, and speaker.
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-Band TTL Serial Port S800S

    ₹399.00 ₹299.00
    1. Module: sim800l quad-band 850/900/1800/1900mhz
    2. Supply voltage range: 3. 4V ~ 4. 4V
    3. Gprs multi-slot class12 connectivity: max. 85
    4. Compact size: 23mm x 35mm x 5. 6Mm
    5. Real time clock
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    SIM900A V4.0 GSM GPRS Wireless Kit S900A

    ,
    ₹699.00 ₹399.00
    1. The onboard SMA (default) and IPXmini antenna interface, SIM900A interface reserved reset.
    2. The size of the module is 49*50, all the new and original device.
    3. The computer can give early computer debugging USB module power supply, a very large amount of data under the condition of the recommended current more than 1A.
    4. Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power. Support 2, mobile phone 3,4G card.
    5. The serial port circuit: support for 3.3V single chip microcomputer. TTL serial port support
    6. 3 and 5V single chip microcomputer.
    7. The SIM card circuit to increase the SMF05C ESD chip.
    8. Antenna circuit: guarantee short and straight, so as to ensure the signal strength.
      PCB display screen printing mark: each interface, convenient development two times, the SIM900/A hardware is completely following the design when the design manual.
    9. Two power supply interfaces: VCC5, 5V DC above 1A. Computer 5V power supply can be early computer USB. DC long data circuit over larger recommended 5V1A. VCC4, 3.5–4.5V power supply, ibid., suitable for lithium battery.

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    Sip To Ethernet TCP/IP Network Module Mini W5500M

    ₹699.00 ₹399.00
    1. 80MHz high-speed SPI interface
    2. Built-in hardware TCPIP protocol stack, users need almost no knowledge of complex network protocols
    3. Support up to 8 Socket connections
    4. Support TCP, UDP, ICMP, IPv4, ARP, IGMP, Pepo protocol
    5. Integrated data link layer, physical layer
    6. Support power-down wake up
    7. Support high-speed serial peripheral interface (SPI mode 0~3)
    8. Internal 32K byte send and receive buffer
    9. Embedded 10BaseT/100BaseTX Ethernet Physical Layer (PHY)
    10. Support auto-negotiation (10/100-Based full/half-duplex)
    11. IP fragmentation is not supported
    12. 3.3V working voltage, I/O signal port 5V withstand voltage
    13. LED status display (full-duplex / half-duplex, network connection, network speed, active status)
    14. Ultra-small pin package for easily embedded applications
    15. Provide C application routines
    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    USB-UART/ESP8266 ADAPTER PROGRAM. WIFI MODULE with CH340G CHIP ESP01A

    ₹399.00 ₹99.00
    1. Driver Chip: CH340G
    2. Supports all basic windows versions.
    3. The adapter plate integrated 1000μF solid capacitors to ensure the current supply
    4. The power supply will not be a problem to make WIFI module crashes unresponsive.
    5. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
    6. Using CH340 turns serial port chip for stable performance and compatibility.
    7. Supports all basic windows versions.
    8. The adapter plate integrated 1000F solid capacitors to ensure the current supply
    9. The power supply will not be a problem to make WIFI module crashes unresponsive.
    10. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
    11. The interposer board is specifically designed for ESP8266 The USB Turn serial port.

     

    Add to cart
  • Sale!
    Add to wishlist
    Quick View

    W5500xSPI TO ETHERNET TCP/IP NETWORK MODULE W5500

    ₹499.00 ₹329.00
    1. Supports 8 independent sockets simultaneously.
    2. Internal 32Kbytes Memory for Tax/Rx Buffers.
    3. Power off mode: support.
    4. Network wake: support.
    5. Factory and Building Automation
    6. Medical Monitoring Equipment
    Add to cart