- Output Voltage: 36V DC
- Maximum Output Current: 2A
- Total Output Power: 72W
- Input Voltage: 100-240V AC, 50/60Hz
- Efficiency: >85% for energy-efficient performance
- Protections: Over-voltage, over-current, and short-circuit protection
- Cooling: Passive cooling (no fan required) for silent operation
- Compact Size: 9 x 5 x 3.5 cm (approx.)
- Weight: 0.3kg (approx.)
- Material: Durable plastic casing for long-lasting use
- Operating Temperature Range: -10°C to 50°C
- Certifications: CE, UL, and other relevant safety certifications
- Waterproof: Non-waterproof, designed for indoor use only
- Applications: Suitable for powering 36V LED lighting, electric bikes, CCTV cameras, and other 36V DC devices
- Global Compatibility: Supports 100-240V AC input for international use
Showing 401–425 of 2487 results
-
3.7V 800mAH (Lithium Polymer) Lipo Rechargeable Battery for RC Drone
₹599.00₹399.00Add to cart- Voltage: 3.7V
- Capacity: 800mAh
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Weight: 16g
- Size: 40mm*25mm*8mm
-
3.7V 850mAH (Lithium Polymer) Lipo Rechargeable Battery for RC Drone
₹599.00₹399.00Add to cart- Voltage: 3.7V
- Capacity: 850mAh
- Battery Type: Lithium
- Input: DC 5V, 0.5~2.5A
- Output: DC 4.2V 2.0A
- Cells : 1
- Weight: 25g
- Size: 57mmx25mmx8mm
-
3.7V 8x16mm 816 Micro Coreless motor 1mm Shaft High Speed 39000 RPM DC Motor
₹399.00₹99.00Add to cart- Coreless Brushed DC Motor – Delivers smooth, high-efficiency operation with minimal vibration
- Optimized for 3.7V DC – Perfect for Li-Po battery-powered applications
- High-Speed Output – No-load speed up to 39,000 RPM for fast-response performance
- Compact Size (8x16mm) – Ideal for space-constrained designs like drones and micro robots
- 1mm Shaft Diameter – Compatible with small propellers, pulleys, or gear attachments
- Pre-Soldered Leads – Easy to connect directly to controllers or circuits
-
3.7V Lithium Battery Protection Board 3A BP13
₹199.00₹59.00Add to cart- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
-
3.7V-12V MINI DC-DC BOOST STEP UP CONVERTOR BOARD NA3712
₹99.00₹69.00Add to cartStep-up converter that boosts input voltage from 3.7V–10V to a stable 12V output. Ideal for powering 12V devices from lithium batteries or USB sources in DIY and portable electronics projects.
-
3.7V-5V 2A 18650 BATTERY BOOST & CHRG C TYPE MODUL TP4056BC
₹199.00₹99.00Add to cart3.7V–5V 2A boost and charge module for 18650 batteries with USB-C input. Features integrated TP4056 charging, 5V output boost, and protection circuits. Ideal for DIY power banks and rechargeable projects.
-
3″ inch 8Ω 5W Full Range Audio Speaker Stereo Woofer Loudspeaker Horn
₹399.00₹199.00Read more- Best 3 Inches Speaker/Woofer for DIY Projects and Kits
- Great and Pleasant Sound
- Impedance:8hm
- Powerful Sound
-
30 A Golden Terminal Socket Black and Red ( pack of 2) BK30
₹259.00₹149.00Add to cart- Product Name : 30 A Golden Terminal Socket
- Material : Plastic, Metal
- Net Weight : 26g
- Socket Size : 4mm;Size : 48 x 16mm / 1.9 x 0.6(H*Max.D)
- Main Color : Black, Red
- Thread Dia. : 4.5mm
- Package Content :30 A Golden Terminal Socket
-
300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module NA505
₹499.00₹279.00Add to cart- Input Supply voltage (V) : 7 ~ 40
- Output voltage (V) : Continuously adjustable (1.25 ~ 35)
- Output Current (A) : 8A (10A maximum)
- Conversion efficiency: : 95%
- Operating frequency (KHz) : 300
- No-load current : Typical 20mA
- Load regulation : 1%
- Voltage Regulation: 1%
-
300W 20A DC-DC Step Down Constant Vol NA505B
₹499.00₹379.00Add to cart- Lithium battery(or lead accumulator) charge
- Low voltage power supply system
- High-power LED driver
- Vehicle-mounted power supply
- Regulated power supply
- Low voltage system power supply
- 6V, 12V, 14V, 24V battery charge
- On-board laptop power supply
- With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust the output voltage and current.
- The efficiency can be up to 96%, measured at 20A, converting 24V to 12V.
- It is designed with a 75V/80A large current dual MOS tube.
- Input and output use high-frequency low resistance electrolytic capacitors, low ripple, and stable output.
- Wiring is convenient with these large current 30A screw terminals.
- The 300W DC-DC Buck Converter Module has 2 heat sinks that could enhance heat dissipation.
- When there is a big difference between input and output voltage, please decrease power and current.
-
30PIN ESP32 EXPANSION BOARD TYPE C USB & MICRO USB ESP32EX
₹199.00₹159.00Add to cart30PIN ESP32 Expansion Board featuring both Type-C and Micro USB interfaces. Designed for easy prototyping with ESP32 Dev Boards, it provides full access to all GPIO pins, onboard 3.3V regulation, reset/boot buttons, and power LED – ideal for IoT, robotics, and embedded development.
-
3144 TO-92 Hall Effect Sensor
₹129.00₹75.00Add to cart- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
-
320mAh 3.7V Single Cell Rechargeable LiPo Battery
₹699.00₹299.00Add to cart- Product: Small Li-Po Battery
- Voltage: 3.7 Volts
- Capacity: 320mAh
- Reusability: Rechargeable
- Battery Cell Composition: Lithium
- Low self-discharge rate
-
35Watt Soldering Iron Heating Element Flat Type pack of 2 35 W Simple
₹399.00₹199.00Add to cart- High class 35watt soldering heating element
- Light weight and easy to install
- Compatible with 35w soldering iron
- Cooper and Nickel and finish
- Attachable with all soldering iron
-
360 GREEN ROTARY ENCODER MODULE FOR AUDUINO AB156
₹199.00₹79.00Add to cart- Widely used for various electrical projects.
- Light weight, small size, easy to carry.
- Esay install & no driver needed.
- Imported from hongkong
-
36V 250W (002S) Cycle Hub Motor Kit
₹9,999.00₹6,699.00Add to cart- Motor Type :- Hub motor, 250W
- Voltage:- 36V
- Wheel Size:- 26” to 28” compatible
- Maximum Speed:- Typically around 25-32 km/h
- Battery Voltage:- 36V
- Battery Capacity: Varies (choose based on desired range, generally between 8Ah to 13Ah)
- Pedal Assist:- 5-level pedal assist system
- Max Load Capacity:- 120kg
- Weight:- Approximately 3.5 – 5 kg
- Charging Time:- Typically 4-6 hours for full charge
-
36V 2Amp Power Adapter
₹999.00₹799.00Add to cart -
36V LITHIUM ION BATTERY BMS 10S 36V 20A BMS FOR 10S 36A LI-ION
₹999.00₹750.00Add to cart- 10S: 10 lithium-ion cells connected in series.
- 36V: Nominal voltage of the battery pack.
- 20A: Maximum continuous discharge current.
- Lithium-Ion: Battery chemistry used.
- BMS: Battery Management System for monitoring and protection.
-
36W 3A SHORT DISTANCE IR HAND SWEEP ON-OFF SEN HANDS
₹279.00₹139.00Add to cart36W 3A Short Distance IR Hand Sweep On-Off Sensor – Touchless infrared sensor switch for easy ON/OFF control with a simple hand wave. Supports up to 36W/3A load, ideal for LED lights, cabinets, wardrobes, and smart lighting setups
-
37 in 1 Sensor Kit Compatible with Arduino
₹999.00₹899.00Add to cart- 37 Sensors To DIY Kit
- Can Be Used With Arduino, Raspberry Pi, AVR, PIC, 8051
- Good Quality, Easy To Use And Learn.
- Skill Level: Beginners To Advance Level.
- Can Be Used For Prototype Purpose.
-
3A 250V AC Metallic SPDT Toggle Switch (PACK OF 10)
₹199.00₹99.00Add to cart- Rated Voltage: 250V AC
- Rated Current: 3A
- Switch Type: SPDT
- Level Length: 12mm
-
3AXIS ACCELEROMTR+ GYROSCOPE MPU6050 GY521 M6050
₹399.00₹159.00Add to cartThe 3-Axis Accelerometer + Gyroscope MPU6050 (GY-521) is a compact motion sensor module that combines a 3-axis accelerometer and 3-axis gyroscope. It provides accurate measurement of tilt, acceleration, and rotational motion, featuring an I2C interface for easy integration with Arduino, Raspberry Pi, and other microcontrollers. Ideal for robotics, drones, wearable devices, and motion-sensing projects.
-
3D Crystal Ball Night Lamp Wooden Base USB Table
₹699.00₹399.00Add to cart3D crystal ball lamp. Featuring a beautifully engraved design and a natural wooden base, it emits a soft, warm LED glow—perfect for bedrooms
