Showing 976–1000 of 2487 results
-
CJMCU MCP4725 I2C DAC Breakout Development Board M4725
₹599.00₹249.00Add to cart- 12-bit resolution
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- I2C Interface (Standard, Fast, and High-Speed supported)
-
CJMCU TCA9548A I2C 8CH MULTIPLE EXT. DEV. BOARD I2C8
₹199.00₹149.00Add to cart8 I2C devices with the same address using this TCA9548A-based multiplexer. Ideal for expanding I2C communication on Arduino, Raspberry Pi, and other microcontrollers. Supports 3.3V and 5V logic levels.
-
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module INA219
₹499.00₹299.00Add to cart- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
-
CJMCU-9930 CLOSE & NON-CONTACT GESTURE DETECTION AND ATTITUDE SENSORS APDS-9930 A9930
₹399.00₹149.00Add to cart- The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package.
- The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly.
- The proximity detection feature operates well from bright sunlight to dark rooms. The wide dynamic range also allows for operation in short distance detection behind dark glass such as a cell phone.
- Features – Working voltage:2.8-3.8V. ALS, IR LED and Proximity Detector in an Optical Module; Ambient Light Sensing (ALS); Approximates Human Eye Response;
- Features – Programmable Interrupt Function with Upper and Lower Threshold; Up to 16-Bit Resolution; High Sensitivity Operates Behind Darkened Glass.
-
CL-96 Mini Sensor Solar Light with Remote Control – 138 COB Lamp Bead
₹999.00₹399.00Add to cartKey Features:
- Powerful 138 COB Lamp Bead: Provides bright, consistent illumination with 138 COB (Chip-on-Board) LEDs, ensuring maximum brightness for your outdoor space.
- Built-In Rechargeable Battery: Equipped with a built-in rechargeable battery, which ensures long-lasting performance and reduces the need for frequent battery replacements.
- Efficient Solar Panel: 5.5V/1.5W solar panel efficiently absorbs sunlight during the day, providing power to the light for reliable nighttime illumination.
- Remote Control: Includes a remote control for easy operation, allowing you to adjust the settings and turn the light on/off from a distance.
- Three Sensor Functions: Features motion detection, light sensitivity, and manual control, allowing you to choose the ideal lighting mode for your needs.
- Induction Distance: Motion sensor detects movement within a 5-meter range, automatically turning on the light when motion is detected.
- Durable Construction: Made from black acrylic and ABS plastics, ensuring a weatherproof and long-lasting design for outdoor use.
- Compact & Lightweight: Weighing only 363.5g, this mini sensor solar light is lightweight and easy to install in any outdoor space.
- Perfect Size: With dimensions of 376mm x 134mm x 70mm, it’s the ideal size for illuminating small to medium outdoor areas like gardens, fences, or doorways.
Specifications:
- Lamp Bead: 138 COB
- Battery: Built-in rechargeable battery
- Solar Panel: 5.5V/1.5W
- Working Voltage: 5V
- Sensor Functions: Three functions + Remote control
- Induction Distance: 5 meters
- Material: Black acrylic + ABS plastics
- Weight: 363.5g
- Dimensions: 376mm (L) x 134mm (W) x 70mm (H)
-
CLAMP METAL MINI FOR GEAR MOT (Pack of 4) MOTCMM
₹199.00₹99.00Add to cartThis Clamp Metal Mini is designed to securely hold small DC gear motors in place, offering a sturdy and reliable mounting solution for robotics.
-
CN3791 12V MPPT Solar Charger Module SC3791
₹449.00₹139.00Read more- Maximum Power Point Tracking (MPPT) Solar Charger Module
- 2-Pin JST Connectors for Solar Panel and Battery Connection
- PWM Switching Frequency of 300KHz
- Maximum Charging Current of 2A
-
CNC SHIELD V3 ENGRAVING MACHINE CNCV3
₹199.00₹139.00Add to cart- The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
- This shield allows you to control upto 4 stepper motors
- Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
- Arduino compatible
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Supports PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- Supports Coolant enable
- Supports removable A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Uses removable A4988 or DRV8825 compatible stepping driver.
-
CO CARBON MONOXIDE COAL GAS SENSOR MQ7
₹399.00₹159.00Add to cart- Sensitive for carbon monoxide
- Output voltage boosts along with the concentration of the measured gases increases
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
-
CO CARBON MONOXIDE GAS SENSOR MQ9
₹199.00₹149.00Add to cartThe Liquified Isobutane Propane Sensor Module is designed for reliable detection of LPG gases like isobutane and propane. It offers fast response, stable performance, and both analog and digital outputs, making it ideal for gas leak alarms, safety systems, and IoT-based monitoring projects.
-
COAXIAL VIDEO GROUND LOOP ISOLATOR WITH BUILT IN VIDEO BALUN CCBGI
₹199.00₹159.00Read more- Ground Loop Interference Elimination: Effectively removes hum bars and video noise caused by ground loops in CCTV systems.
- Built-in Video Balun: Converts coaxial cables into balanced video transmission, enabling long-distance video over Cat5/Cat6 cables.
- No Power Required: Passive device that operates without external power for hassle-free installation.
- Long-Distance Transmission: Supports clear video signal transmission up to 600 meters using UTP (Unshielded Twisted Pair) cable.
- Universal Compatibility: Standard BNC male-to-female connectors ensure compatibility with most CCTV systems.
- Durable and Compact Design: Robust construction with shielding to protect against EMI and RFI interference.
- Multi-Format Support: Compatible with NTSC, PAL, and SECAM video formats.
- Ideal for CCTV Systems: Perfect for use in buildings with different grounding potentials, or for long-distance cable runs.
-
Coin Battery SR621SW 364
BATTERY & CELL STORE, CELL & BATTERIES, LI-ION BATTERY (Lithium i-on), NON-RECHARGEABLE BATTERY & CELL₹999.00₹995.00Add to cart- The prices include 20% VAT
- Diameter 6.8 mm
- Height 2.15 mm
- Capacity 23.0 mAh
- Mass 0.32 g.
-
COLOR RECOG SENSOR MODULE TCS230
₹499.00₹399.00Add to cartThis Color Recognition Sensor Module uses the TCS3200/TCS230 chip to detect and differentiate colors by converting light intensity to frequency output.
-
Combination Cutting Plier/Plas 8″
₹299.00₹199.00Add to cart- Drop forged from tested chrome vanadium steel
- Anti-rust protected
- Smooth and quick working
- Jaws induction hardened
- Package contains :- 1 Piece Carbon steel Plier , Color may vary
-
Combination Plier 6 Inch Orange Color Lineman Plier COMB
₹199.00₹99.00Add to cart- Overall Length: 6 inch
- Handle Material: PVC
- Body Material: IRON
-
Combination Plier Engineers Plier 8 Inch COMB8
₹199.00₹115.00Add to cart- Drop forged from tested chrome vanadium steel
- Anti-rust protected
- Smooth and quick working
- Jaws induction hardened
-
Commando Rechargeable Torch Light
₹6,999.00₹4,999.00Add to cartThis 55W rechargeable torch delivers a soft warm white (2700K) beam ideal for night use, patrolling, and emergencies. Featuring a long-range LED
-
COMPUTER AC PLUG MALE IMP(Pack of 2)JX1654I
₹399.00₹99.00Add to cartCOMPUTER AC PLUG MALE IMP is a durable and reliable male AC power connector designed for computers, monitors, SMPS, and electronic equipment. It supports stable power input, features high-quality metal contacts for efficient conductivity, and a heat-resistant insulated body for safe and long-term use in home, office, and industrial applications.
-
COMPUTER AC SOCKET MALE “SP864A2” (COPPER) JX570C
₹99.00₹79.00Add to cartHigh-quality panel-mount AC power socket with durable copper terminals, offering excellent conductivity and safe, reliable power input for computers, SMPS, UPS systems, and electronic enclosures. Ideal for repair, replacement, and DIY power applications.
-
COMPUTER AC SOCKET MALE “SP864A2″(pack of 2) JX570I
₹99.00₹49.00Add to cartDurable panel-mount AC power inlet designed for computers, power supplies, and electronic enclosures, providing a secure and reliable 110–250V AC power connection.
-
Computer Jack 3 Pin Ac Plug Female Supply Panel Mount (pack of 2) JX2290
₹399.00₹99.00Add to cart- Set Content 1 Iec C14 Power Lock Connector 3 Pin Ac Plug Female Computer Supply Panel Mount Type
- Color Red, Black
- Power Requirement 220 Volts 5 Amperes
- Not Covered in Warranty Physical damages and burns
-
COMPUTER POWER CABLE/LEAD 2.5MT (3PIN/3WIRE) LECOD2
₹199.00₹149.00Add to cart- Extended Length: 2.5 meters for greater flexibility in placement and reach
- 3-Pin/3-Wire Configuration: Standard design ensures safe and efficient power delivery
- Wide Compatibility: Suitable for a range of devices including desktops, monitors, printers, and more
- High Durability: Crafted from premium materials for long-lasting performance and resistance to wear
- Safety Standards: Complies with international safety regulations for reliable operation
- User-Friendly: Simple plug-and-play setup for quick and easy connections
- Cost-Effective: Affordable option for powering your electronic devices without compromising quality
- Enhanced Cable Management: Helps reduce clutter and organize your workspace efficiently
-
COMPUTER POWER LEAD/CABLE 1.5MT (3PIN/3WIRE) LECOD
₹199.00₹99.00Add to cart- Length: 1.5 meters for optimal reach and flexibility
- Configuration: Standard 3-pin/3-wire design for safe and reliable power connection
- Versatile Use: Compatible with desktop computers, monitors, printers, and other electronic devices
- Durable Construction: Made from high-quality materials for enhanced durability and longevity
- Safety Compliant: Meets international safety standards for peace of mind
- Easy to Use: Plug-and-play design for quick and hassle-free connections
- Affordable Solution: Cost-effective option to ensure your devices are powered efficiently
- Clutter-Free Setup: Helps maintain an organized workspace with improved cable management
-
COMPUTER SOCKET WITH FUSE “SP864A2”JX570F
₹99.00₹69.00Add to cart- Integrated Fuse Protection: Safeguards connected devices from overloads and short circuits for enhanced safety.
- Easy Installation: Press-fit design allows for quick and secure installation without additional hardware.
- Durable Materials: Constructed from high-quality materials for long-lasting performance and reliability.
- Versatile Applications: Suitable for various devices, including home appliances, tools, and electronics.
- Compact Design: Space-saving size enables easy integration into electrical panels and junction boxes.
- User-Friendly: Clear labeling and simple design make it easy for both professionals and DIY enthusiasts to install.
- Reliable Performance: Handles standard voltage and current ratings for consistent and dependable operation.
- Cost-Effective Solution: Provides an efficient and safe option for electrical connections in various projects.
- Warranty Included: Comes with a warranty for peace of mind with your purchase.
