Showing 25–48 of 63 results
-
Sale!
₹199.00 ₹99.00
- Signal Gain 200 (multiplier)
- On-board LM386 Chip
- On-board speaker wiring Block
- Wide supply voltage range: 5 V to 12 V DC
- Low distortion
- On-board LED for the power indicator
- Volume Control 10 k Ω preset
- Screw Terminal for speaker output connection
- Board size Approx. 41 mm × 13 mm
Add to cart
-
- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
- Maximum voice storage: 512 voice
- Operating voltage: DC 2.6 to 3.6V
- Quiescent current: 16 μA (SD card is not included)
Read more
-
Sale!
₹199.00 ₹99.00
- USB Powered
- LED Indicator
- 3.5 mm Stereo Audio Interface
- 3.7 – 5V Supply Pad
Add to cart
-
Sale!
₹199.00 ₹75.00
- Working Voltage: 3.7V Lithium Battery 600MA or 5V USB Power Supply
- With Power supply, it can play Automatically
- With Multifunction LED indicator
- Supports MP3 format playback
- Supports USB audio mode
Add to cart
-
Sale!
₹199.00 ₹125.00
- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
Add to cart
-
Sale!
₹199.00 ₹99.00
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filter-less, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
Add to cart
-
Sale!
₹199.00 ₹99.00
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
Add to cart
-
Sale!
₹199.00 ₹129.00
- Input Voltage : 2.5-5.5 V(USB power supply).
- Output Impedance : 4 ohm.
- Efficiency : 90%.
- Frequency Response : 150 Hz – 20 MHz.
- Input Impedance : 2 Kohm.
- Dimensions : 15 x 20 mm.
Add to cart
-
Sale!
₹199.00 ₹99.00
- The two-channel stereo, 5V power supply can output 5W + 5W power
- Unique non-LC filter Class-D digital power board
- Dual-panel wiring
- Ultra-miniature design
- Solder by machine
- The rated working voltage 2.5-5V, limit operating voltage 5.5V
Add to cart
-
Sale!
₹499.00 ₹190.00
- Dual channel audio amplifier
- Working voltage : 12V
- Output power : 10W+10W
- Chip name : PAM8610
- Efficiency : 90%
- Frequency response : 20Hz to 50KHz
Add to cart
-
Sale!
₹299.00 ₹149.00
- Adopting Pam8610 chip, with a static current of 20 mA, low power consumption, and good sound effect.
- Equipped with dedicated adapters, audio cables, and speaker cables to meet various usage scenarios.
- Operating Voltage: DC7 5-15v, recommended power supply: DC12V.
- Rated output power: 15 W+15 W (4 Ω load), 10 W+10 W (8 Ω load).
- Package List: Audio Amplifier Board x 1,Audio Receiver x 1,QC 12V Trigger Power Cable x 1,PD 12V Trigger Power Cable x 1,Aux Audio Cable x 1, Audio Speaker Cable x 2.
Add to cart
-
Sale!
₹99.00 ₹49.00
- 100% branded and tested genuine product
- Working voltage : 12V
- Use external speakers for a sound connection
- Speakers do not come with this board
- Small, durable, and light
- IC : single 6283
Add to cart
-
Sale!
₹499.00 ₹329.00
- 100% Brand new and premium quality
- Type: 2.1/4.1 home theater
- Power rating: 60 Watt
- Home theater audio board
- Pleasant sound and bass boosted
- Bigger heatsink for longer playback
- Power up to 3 amp support
Add to cart
-
Sale!
₹299.00 ₹210.00
- Input voltage 12-0 -12,
- Current 1.5 to 3 amp.
- Power : 150 Watt.
- You can be used in Both 4.1 & 5.1
- Heavy channel heatsink for preventing it from heating, Increases the life of the board.
- 7805 with its Heatsink also attached for 5 volt supply.
Add to cart
-
Sale!
₹499.00 ₹399.00
-
Power 150 Watt Home Theater Boards
-
Bass Circuit Used for 4.1, 5.1 and 6.1 Home Theater Boards.
-
Heavy Channel Heatsink For Preventing it From Heating, Increases Life of the Circuit.
-
Pleasent Sound and Bass Boosted
-
Bigger Heatsink for Longer Playback
Add to cart
-
Sale!
₹199.00 ₹62.00
- Operating voltage: DC 6V to 12V.
- Onboard TDA2030A Audio amplifier IC.
- Mono channel 18W Power amplifier circuit design.
- Onboard horn socket.
- 10 k adjustable resistance to adjust the volume of the amplification.
- Onboard power indicator light.
- Chip has lead to the main pin, can directly input the audio signal.
Add to cart
-
Sale!
₹399.00 ₹249.00
- 100% branded and tested genuine product
- Use external speakers for a sound connection
- Speakers do not come with this board
- Small, durable, and light
- IC: TDA2050
- 3 inbuilt transistors
Add to cart
-
Sale!
₹399.00 ₹239.00
- 100% branded and tested genuine product
- Use external speakers for a sound connection
- Speakers do not come with this board
- Small, durable, and light
- IC: TDA2050
- 4 inbuilt transistors
Add to cart
-
Sale!
₹399.00 ₹299.00
- 100% branded and tested genuine product
- Use external speakers for a sound connection
- Speakers do not come with this board
- Small, durable, and light
- IC : TDA2050
- 5 inbuilt transistors
Add to cart
-
Sale!
₹1,399.00 ₹1,149.00
- 100% branded and high-quality audio board
- Comes with 4700uf capacitors
- The IC is enough powerful to drive heavy woofers
- The output current is also high that giving pleasant sound quality
- It works with 200-watt power
Add to cart
-
Sale!
₹399.00 ₹199.00
- The onboard dial potentiometer can adjust the volume output size
- All the parts used are all high quality, low noise, can be suitable for stable jobs
- Onboard TDA7297 audio power amplifier chip, dual channel 15W+15W, suitable for 4-8 ohms 10-50W speakers
- The main pin of the chip has been led out to facilitate the control of the external device. Onboard 2 channel 5.08 (mm) pitch 2P binding posts are respectively for the left and right channel wiring output
- Support DC power supply, terminal block, and pin 3 power input mode. The default is DC, and the working voltage is 6-18V
Add to cart
-
Sale!
₹1,999.00 ₹1,199.00
- 25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω
- Wide-range single-supply operation (8 – 26 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
Add to cart
-
Sale!
₹499.00 ₹199.00
- TDA8932 digital amplifier board module, using high quality materials, with high power, low power consumption characteristics.
- Operating voltage: DC10-30V (Recommended to use DC 24V 2A output power supply).
- Applicable speaker impedance: 8 ohm best. (4 ohms, 6 ohms can also be used).
- Product features: 35W mono amplifier board.
- There is a product wiring diagram in the product picture project on the left. Please check it carefully before use.
Add to cart
-
Sale!
₹199.00 ₹139.00
- Support MP3 format, playing power on automatically.
- When mp3 is played the red LED flashes.
- Support U disk (test 32G), TF Card (test 16G) play mode; power-on default. TF card mode, if the TF card does not have the right type of operation.
- Buttons can be adjusted up and down to control songs, volume up and down, pause or play, and mode switching.
- Press the menu button to enter the single / all song play mode. The default mode is the all song mode when powered up. Pressing the Repeat button can replace the circulating mode.
Add to cart