Showing 1–25 of 404 results
-
“RXB39-X” Wireless RECEIVER 4CH 433Mhz RF Module RXB39X
₹499.00₹199.00Add to cart- Working Voltage : DC3.3~5V
- Quiescent Current : ≤5mA
- Output current : 10 mA
- Working Frequency: 433MHz
- Receive Sensitivity: -108dB
- Working Temperature : -25~75
- Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking
- The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons
-
(SW-420) Vibration Sensor Module
₹99.00₹59.00Add to cart- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability >15mA
- Operating Voltage: 3.3V ~ 5V
- Output Format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
0.28″ 0-100V 3 Wire Dc Voltmeter Red VM283
₹199.00₹99.00Add to cart- Wide Voltage Range: Measures DC voltage from 0 to 100V.
- Compact Design: Small 0.28″ display fits into tight spaces easily.
- Bright LED Display: Clear red digits for excellent visibility, even in low light.
- 3-Wire Configuration: Simplifies installation with positive, negative, and signal connections.
- High Accuracy: Provides precise voltage readings with ±1% accuracy.
- Low Power Consumption: Energy-efficient design minimizes power usage.
- Versatile Application: Suitable for automotive, industrial, and DIY electronic projects.
- Dimensions:
- Height: 24mm (0.94 inches)
- Width: 42mm (1.65 inches)
- Depth: 15mm (0.59 inches)
- Lightweight: Weighs approximately 20 grams (0.04 lbs).
-
0.28″ 3.5-30V 2 Wire Dc Voltmeter Blue VM28B
₹199.00₹99.00Add to cart- Measuring Range: 0 ~ 100VDC
- It is a 2-wire display.
- LED Colour: BLUE56
- Current Consumption : < 15 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx. 200mS/time.
- Measure accurately up to 3.6 V
-
0.28″ 3.5-30V 2 Wire Dc Voltmeter Green VM28G
₹159.00₹99.00Add to cart- Measuring Range: 0 ~ 100 VDC
- It is a 2-wire display.
- LED Colour: GREEN
- Current Consumption : < 15 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx. 200mS/time.
- Measure accurately up to 3.6 V
-
0.28″ 3.5-30V 2 Wire Dc Voltmeter Yellow VM28Y
₹199.00₹99.00Add to cart- Don’t compromise best price and high quality
- Package Includes :- 1pcs voltmeter
- Package Includes :- 1pcs voltmeter
- LED Color:multi , It is a 3-wire display.
- this voltmeter will automatically move the decimal point’s position according to the different measuring voltage
-
0.56″ DC 0-100V 3WIRE LCD LIGHT DIG VOLT. RED VM56R
₹119.00₹99.00Add to cart- Operating Voltage: 0-100 VDC
- It is a 3-wire display.
- LED Color: RED
- Current Consumption : <40 mA
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The red wire is to connect to the positive pole, the black wire is to connect to negative pole and the yellow/white wire is to connect to the positive pole of that source or another source across which we meant to measure the voltage. While measuring the supply voltage of another source make sure that the negative pole is joined common.
- No need to worry even if there is any connection mismatch of the wires, the electric circuit won’t be a boom because it features reverse polarity protection.
-
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-BLUE
₹449.00₹299.00Add to cart- Operating Voltage: 0-100 VDC
- It is a 3-wire display.
- LED Color: Blue
- Current Consumption : <40 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 3 V.
-
0.5V TO 4.20 MA VOLTAGE-TO-CURRENT MODULE VC05M
₹699.00₹350.00Add to cart- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
- drifting temperature: +/- 100ppm /
- Ambient temperature: -10 ~ 60
- Storage temperature: -20 ~ 85
- Relative Humidity: 10-90% RH
- air pressure: 86-106Kpa
-
0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Red
₹149.00₹119.00Add to cart- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Dont need the external power supply because it is a self-powered version of this display.
- Best operates in the working voltage range of 5V to 24V
- 100% Brand new and high quality.
-
0.9-5VTO 5VDC-DC Step Up Boost Voltage Conver. 482MA NA626
₹149.00₹69.00Add to cart- Input voltage 0.9~ 5V,output 5V
- Maximum output current: 480 MA,
- Start Voltage 0.8V, Output Current 7MA
- INPUT 1-1.5V, OUTPUT 5V 40-100MA;
- INPUT 1.5-2V, OUTPUT 5V 100-150MA;
- INPUT 2-3V, OUTPUT 5V 150-380MA;
-
10 ohm NTC Thermistor(Pack of 2)
₹99.00₹20.00Add to cart- Resistance : 10000 OHM
- Temperature : -30°C to +125°C
- Tolerance : ±5%
-
1000KV Step Up Power Module SM1KV
₹399.00₹249.00Add to cart- Input Voltage: DC3.6V-6V
- Input Current: 2A-5A
- Output Voltage: DC 500KV-1000KV (Please pay attention to safety when used)
- Input Line Length: about 100mm (red is positive)
- Output Line Length: about 160mm
-
100A 75M V Shunt For VAM28 VMSHUN
₹299.00₹199.00Add to cart- This Shunt Resistor is used to multiply the measuring range of current of measuring.
- Could be used either in a Digital or an Analog meter. Good quality, good performance and easy to instal.
- Current: 100A; Voltage Drop: 75mV; Accuracy: 0.5 Class
- Dimension: 10.4 x 2.2 x 2.5cm / 4.1″ x 0.85″ x 1″(L*W*H)
- Package Content: 1 x 100A 75mV DC Shunt Resistor
-
100A Non-IVCASIVE Split Core Ac Current Sensor SCT013
₹999.00₹618.00Add to cart- Non-invasive current transformer
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
- Two form of output current, voltage (voltage output built-in the sampling resistor)
- Non-linearity 3%(10%-120% rated input current)
- Output Plug 3.5mm
-
10K NTC THERMISTOR-1% STAINLESS STEEL 1M WIRE B3950
₹199.00₹78.00Add to cart- Probe sheath material: Stainless Steel
- Style: B3950 10K
- Resistance value: 10K ± 1%
- Measurement range: -20 to 105 °C
- Cable Length: 4-meter
- Size of probe: 5 x 25 mm
- Output wires: 2
- Typical Dissipation Constant: 5mW/ °C
- Probe insulation: >100MOhm
-
10V-60V 20A 1200W DC MOTOR PWM SPEED CONTROL PWM20
₹299.00₹199.00Add to cart- This motor speed controller is a 10-60V PWM speed regulator which is an important electronic component of DIY projects.
- The motor speed controller switch produces a power of 1200W and has an operating voltage of DC10-60V.
- The 1200W motor speed controller is integrated with a linear potentiometer which is used as a speed regulation method.
- The PWM speed controller switch uses a barrier terminal block as it’s wiring type and can also be used as a 20A current regulator.
- The speed of the DC motor can be controlled by adjusting the pulse width modulation (PWM) | Maximum Power: 1200W
-
12.7MM CIRCULAR FORCE SENSOR 13MM X 56MM FSR402
₹499.00₹249.00Add to cart- Easily customizable to a wide range of sizes
- Cost-effective
- Ultra-thin; 0.45 mm
- Robust; up to 10 million actuations
- Simple and easy to Integrate
-
1200W DC DC Step Up Converter 8-60V TO 12-83V 20A NA67
₹999.00₹799.00Add to cart- High-power LED driver
- Vehicle-mounted power supply
- Low voltage system power supply
- 6V, 12V, 14V, 24V battery charge
-
12v Solar/DC to AC Converter with Mobile Charging USB Output (12V DC Power to 220V AC) Solar Converter 200w
₹999.00₹499.00Add to cart- Input Voltage: 12V DC
- Output Voltage: 220V AC
- Output Power: 200W (peak)
- USB Charging Port: 5V DC, 1A for mobile device charging
- High Efficiency: Up to 90% power conversion efficiency
- Compact Design: Lightweight and portable for easy transport
- Safety Features: Over-voltage, over-current, and short-circuit protection
- Built-in Cooling Fan: Prevents overheating during operation
- User-Friendly Setup: Easy installation with clear power indicators
- Durable Construction: Aluminum casing for enhanced durability
- Wide Operating Temperature: -10°C to +60°C for versatile use
- Versatile Applications: Suitable for camping, RV power, and emergency backup
- Ideal for Small Appliances: Powers various devices, including electronics and tools
-
12V SPOT WELDING MACHINE DIY PORTABLE BATTERY WELDM
₹3,999.00₹1,299.00Add to cart- Working Current (A):90-150
- Supply Voltage(V):12-15
- Welding Current(A):90-130
- Length (mm):80
- Width (mm):45
- Cable Length(cm):36
- Weight (gm):146
- Through the MOS tube output, this energy will be concentrated at the end of the welding pen, and it will be heated by short circuit.
- Lightweight and portable, stable and reliable, wear resistant and can provides long service time.
- Suitable for welding 186502665032650 battery.
- Fuse the nickel sheet family with the battery.
- It is precisely controlled by the single-chip microcomputer program without trigger switch.
-
12V Universal Dual USB Digital Voltmeter & Battery Indicator Display Module
₹399.00₹225.00Add to cart- 12V , 24v , 36V , 48V , 60V , 72V battery cars ( common for batteries below 96V ) , and can also measure lithium batteries ,polymer batteries , and nickel-metal hydride batteries
- 4, 8 segment power resolution: 10% 25% 40% 50% 60% 75% 90% 100% Double display battery voltage at a glance
- The upper 8 bars show the battery power ( 2 red and 6 green ) This product is appropriate for all types of instruments, outdoor power, mobile power, and other equipment.
- Down link voltmeter ( display battery voltage ) , voltmeter decimal point automatic shift accuracy is higher This device features a low-heat, energy-saving synchronous rectification step-down chip scheme
- The two-wire system of the meter head can directly test the battery .The current is smaller the lower the battery voltage.
-
12V-40V 10A DC Motor PWM Speed Control Switch PWM10
₹299.00₹199.00Add to cart- Control the speed of a DC motor with this controller.
- High efficiency, high torque, low heat generating.
- With reverse polarity protection, high current protection.
- Control voltage over-voltage protection function
- The overload and short circuit protecting current is 10A
- Working Voltage: DC 12V DC 40V.
- Control Power:0.01 400W.
-
12V-60V CAPACITY INDICATOR CHRG TESTER VOLT VM1260
₹299.00₹110.00Add to cart- Voltage Measuring Range: 12-60V DC
- Working Current: 5 ~ 15mA
- Material: Copper + ABS Plastic
- Body Color: Black
- Dimension (L x W x H)mm: 55 x 32 x 28
- Cable Length: 15 cm
- Digital Display Light Color: Blue
- Type: LED Voltage Voltmeter
- Working Temperature: -10 ºC ~ 65 ºC
- Refresh Speed: About 300mS Once
- Waterproof: No
- It Has a Wide Range of Applications, Including Lithium Battery Packs, Lead-Acid Batteries, Car Batteries, Electric Car Batteries, And Many Other Types of Batteries and Electric Equipment.
- Voltmeter Decimal Point Automatic Shift Accuracy is Higher.
- It Can Also Be Used For Other Power/Voltage Measurement Purposes.
- The Display is More Intuitive.
