Showing 101–125 of 404 results
-
BLUETOOTH 4.2F 5W+5W STEREO AD AMP MODULE APCT14
₹399.00₹165.00Add to cart- Bluetooth Version: 4.2
- Supply Current (A): 1
- Recommended Power Supply: 5V
- Max. Audio Output Power: 10W
- Length (mm): 41
- Width (mm): 20
- Height (mm): 11.5
- Weight (gm): 15
-
BLUETOOTH AUDIO MODULE POWER AMP BOARD 3.5-5V BT28
₹199.00₹99.00Add to cart- Bluetooth 3.0 with audio signal decoding feature.
- The output is directly compatible with the amplifier.
- Very less weight and small size form factor make it easily fits into any application area.
- Can be used to Design your own wireless music system
- Low power consumption.
- 3.5v-5v voltage supply.
- Weight: 0.003Kg.
- LxBxH: 23mx13mmx2mm.
-
Bluetooth FM with MIC Slot Big Display USB IR Antenna Slot MP3 Stereo Audio Player Decoder Module Kit with Big Remote
₹699.00₹425.00Add to cart- Working voltage : 5V
- Support : mp3/Bluetooth/USB/FM/memory card/Mic slot/IR antenna slot/Big digital display/Big remote controller
- Excellent Sound Quality
- Can connect speakers directly
- Cheap and easy to install
- Remote for Easy Handling
-
Bluetooth MP3 USB FM radio player module BPM3
₹399.00₹120.00Add to cart- Working voltage: 5V
- You can connect two speakers of 5 watts directly
- 3 pre-install buttons for easy handling
- Support: mp3/Bluetooth/USB/aux/FM/memory card/USB charging
- FM /USB/AUX/TF/MIC
-
BODY SCALE LOAD CELL SENSOR RESIS. STRAIN 50KG LOAD50B
₹199.00₹99.00Add to cart- Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
- Widely used in hopper scales, platform scales, platform balance, belt scales, and other electronic weighing devices.
- This is a half-bridge load sensor, which is widely used in weight scales. When the half-bridge is being stretched, it sends the signal via the red signal wire.
- Alloy Steel wired weighing load cell, high accuracy, simple structure, simple installation.
You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
-
BTS7960 Double 43A H-Bridge High-Power Stepper Motor Driver Module
₹499.00₹449.00Add to cart- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
-
Capacitive Soil Moisture Sensor V2.0
₹199.00₹99.00Add to cart- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
-
Carbon Monoxide, Methane and LPG Gas Sensor Module MQ9
₹199.00₹149.00Add to cart- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
-
Cartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
₹199.00₹99.00Add to cart- Acrylic Body.
- Easy to install.
- compatible with HC-SR04
-
CCTV OUTDOOR PAN AND TILL SCANNER CCS303
₹5,999.00₹5,899.00Add to cart• Outdoor Scanner/ Rotator for CCTV camera with Pan/tilt
function
• Permanent synchronous motor for high performance
• Roatation Angle:Pan-0~350?; Tilt-?45?
• Rotation Speed: Pan-9?/s; Tilt-1?/s
• Heavy duty die casting aluminium aloy material
• Resistant to high temperature,corrosion, strong wind, acid
rain and water
• Load capacity: 5kg
• Connection type: 6 pole terminal strip
• Input Voltage: 220V@50/60Hz
• Dimensions: Height: 238mm; ?201mm -
CHIP DRV8825 STEPPER MOTOR DRIVER + HEATSINK D8225
₹299.00₹199.00Add to cart- High Current Capacity: Supports up to 2.5A per phase for driving larger stepper motors efficiently.
- Microstepping Functionality: Offers up to 1/32 microstepping for smooth and precise motor control.
- Adjustable Current Limit: Easily set current using a built-in potentiometer for optimal motor performance.
- Integrated Heatsink: Equipped with a heatsink for improved heat dissipation, enhancing reliability and performance.
- Multiple Protection Features: Includes overcurrent, thermal shutdown, and undervoltage lockout to protect your motor and driver.
- Wide Voltage Range: Operates with input voltages from 8.2V to 45V, making it suitable for various applications.
- Compact Design: Space-saving dimensions ensure easy integration into your projects.
- User-Friendly Setup: Clearly labeled pins and connections simplify installation for all skill levels.
- Versatile Applications: Ideal for use in robotics, CNC machines, 3D printers, and other precision motion control applications.
- Enhanced Performance: Designed for high efficiency, ensuring longer operational life for both the driver and stepper motors.
-
CJMCU MCP4725 I2C DAC Breakout Development Board M4725
₹599.00₹249.00Add to cart- 12-bit resolution
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- I2C Interface (Standard, Fast, and High-Speed supported)
-
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module INA219
₹499.00₹299.00Add to cart- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
-
CJMCU-9930 CLOSE & NON-CONTACT GESTURE DETECTION AND ATTITUDE SENSORS APDS-9930 A9930
₹399.00₹149.00Add to cart- The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package.
- The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly.
- The proximity detection feature operates well from bright sunlight to dark rooms. The wide dynamic range also allows for operation in short distance detection behind dark glass such as a cell phone.
- Features – Working voltage:2.8-3.8V. ALS, IR LED and Proximity Detector in an Optical Module; Ambient Light Sensing (ALS); Approximates Human Eye Response;
- Features – Programmable Interrupt Function with Upper and Lower Threshold; Up to 16-Bit Resolution; High Sensitivity Operates Behind Darkened Glass.
-
CNC 3D Printer Mechanical EndStop Switch
₹99.00₹79.00Add to cart- Wire type: 22AWG
- Working voltage: 300V
- Working Current: 2A
- Temperature resistance: 80° C
- Cable length: 70cm
-
CO CARBON MONOXIDE COAL GAS SENSOR MQ7
₹399.00₹159.00Add to cart- Sensitive for carbon monoxide
- Output voltage boosts along with the concentration of the measured gases increases
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
-
Colour Recog. Sensor Module TCS3200 /TCS230
₹899.00₹599.00Add to cart- imported chips TCS3200 PCB board with gold plating
- TCS3200 is the TCS230 upgrade version, the better
- Power supply 3-5v
- anti-light interference
- white LED can control the on and off.
- can detect non-luminous object colour
- High-resolution conversion of light intensity to frequency.
- Chip pins all have drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable colour and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface-mount package.
-
CP2102 USB 2.0 to TTL UART serial converter Module – 6 Pin
₹249.00₹199.00Add to cart- Included USB transceiver, without external circuit device
- Includes a clock circuit and power-on reset circuit
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meet the USB2.0 specification requirements
-
DC 12V WATER AIR INLET FLOW SWITCH ½” SVALVE
₹499.00₹259.00Add to cart- Usage: water and low viscosity fluids
- Material: metal + plastic
- External thread diameter: approx. 20mm
- Screw hole pitch:25mm
- Size: approx. 84 x 57mm (L x H)
- Coil size: approx. 34 x 23mm (W x H)
- Unit conversion: 1mm=0.039inch
-
DC 6V 12V 24V 2V 3A 80W SPEED CONTROLLER ADJ PWMHS
₹299.00₹199.00Add to cart- Versatile Voltage Compatibility: Works with 6V, 12V, and 24V DC motors, accommodating various applications.
- Powerful Performance: Handles up to 3A of continuous current, ensuring robust motor operation.
- Adjustable Speed Control: Features an intuitive adjustable knob for smooth and precise speed regulation.
- High Power Capacity: Supports a maximum power output of 80W, suitable for heavy-duty tasks.
- Compact & Lightweight: Designed for easy integration into tight spaces or complex setups without compromising performance.
- User-Friendly Installation: Clear labeling on input and output terminals for straightforward wiring and setup.
- Overload Protection: Equipped with built-in safety features to prevent overheating and overcurrent situations.
- Durable Construction: Made from high-quality materials for long-lasting reliability and performance.
- Ideal for Various Applications: Perfect for use in robotics, automation systems, fans, and other motor-driven devices.
-
Dc to Ac Converter 12v to 220v Converter Inverter 12v DC to AC Mini Car Inverter
₹499.00₹299.00Add to cartCan be used for multiple applications
High power output and Highly efficient -
DC-DC 12V-3.3V 5V 12V Power Module Volt Converter LM228
₹199.00₹79.00Add to cart- Input Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
- Small and Handy Module.
- Dual-side plate design
- Easy to use.
-
DC-DC 6-24V TO 5V USB Step Down Power Charger USB245
₹149.00₹99.00Add to cart- Maximum Output Current: 3A MAX
- Conversion efficiency: can up to 97.5%
- Switch frequency: 500KHz
- Output Ripple: 10mV around (12V to 5V3A) 20M bandwidth
- Output indicator: Output voltage indicator is red
- Operating temperature: Industrial grade (-40 ° to + 85 °)
- Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection.
- Flat copper inductor, improve conversion efficiency
- High-quality USB port
-
DC-DC ADJUSTABLE STEP DOWN MODULE 4~38V 5A XL4015
₹259.00₹159.00Add to cart- Input voltage range:4~38VDC(Note:input voltage not exceeding 38V)
- Output voltage range:1.25-36VDC adjustable
- Output current: 0-5A, recommended for use in 4.5A.
- Output power: 75W 5.Working temperature: -40~+85 degrees
- Operating frequency: 180KHz
- Efficiency:96%(max)
- Short circuit protection: yes(limit current 8A).
- Over temperature protection
- Input reverse polarity protection: None (if required, high current diode in series with the input).
- L x W x H = 54 * 23 * 18mm
- Heat Sink included
