Showing all 25 results
-
10K NTC THERMISTOR-1% STAINLESS STEEL 1M WIRE B3950
₹199.00₹78.00Add to cart- Probe sheath material: Stainless Steel
- Style: B3950 10K
- Resistance value: 10K ± 1%
- Measurement range: -20 to 105 °C
- Cable Length: 4-meter
- Size of probe: 5 x 25 mm
- Output wires: 2
- Typical Dissipation Constant: 5mW/ °C
- Probe insulation: >100MOhm
-
12Volt AC DIGITAL TEMP CONTROLLER W3001
₹399.00₹199.00Add to cart- Output type: AC Output (12V 1500W).
- Temperature setting upper and lower limits.
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C.
- Temperature Control Range: -50~110°C.
- Control Accuracy: Upton 0.1℃.
-
AC 220V 1500W Digital Microcomputer Thermostat Switch W3001A
₹499.00₹199.00Add to cart- Output type: AC Output (AC 220V 1500W).
- Temperature setting upper and lower limits.
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C.
- Temperature Control Range: -50~110°C.
- Control Accuracy: Upto 0.1℃.
-
DHT11 Temperature And Humidity Sensor Module DHT11
₹299.00₹199.00Add to cart- Power Supply: 3.3~5.5V DC
- Output: 4 pin single row
- Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
- Accuracy: Humidity +-5%RH, Temperature +-2℃
- Resolution: Humidity 1%RH, Temperature 1℃
-
DHT22 Temperature and Humidity Module DHT22
₹399.00₹149.00Add to cart- Supply voltage: 5V
- Temperature range:-40-80℃ resolution0.1℃ error <±0.5℃
- Humidity range:0-100%RH resolution0.1%RH error±2%RH
- Sequence of the line:VCC,GND,S
- Size: 38 x 20mm
-
Digital Thermometer Waterproof TPM-10 TPM10
₹199.00₹99.00Add to cart- Temperature range: -50°C ~ +110°C
- Temperature display resolution: ±0.1
- temperature measurement accuracy: 1°C
- Cable Length: 1M
- Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
- The module is powered by a pair of LR44 button batteries (battery included)
-
DS18B20 Digital Temperature Sensor Module DS18B20M
₹199.00₹99.00Add to cart- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
-
DS18B20 Waterproof Digital Thermal Probe 1M AB117
₹199.00₹165.00Add to cart- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moisture proof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
-
Five Channel Flame Sensor Module AB133
₹299.00₹199.00Add to cart- Supply Voltage: 3.3V – 9V DC
- Outputs: 5 Analog and 5 Digital
- Adjustments: On-board potentiometer for adjusting the sensitivity
- Indicator LEDs: Five (one on each channel) and one power indicator
- Frequency: 760nm to 1100nm
- Detection Area: >120 degrees at approximately 80cm
-
Flame Sensor Module AB007
₹199.00₹79.00Add to cart- The Flame Sensor Module can detect flames in the 760 – 1100 nanometre wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m.
- Detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
-
Flame Sensor Module Blue 3Pin AB007B
₹199.00₹79.00Add to cart- Detection angle about 60 degrees, it is sensitive to the flame spectrum
- Accuracy adjustable
- Operating voltage 3.3V-5V
- Output a. analog voltage outputb. digital switch outputs (0 and 1)
- With a mounting screw holePCB size: 3cm * 1.6cm
- Power indicator (red) and digital switch output indicator (green)
- Comparator chip LM393 ,it is stable
- Flame detection distance, lighter flame test can be triggered within 0.8m, if the intensity of flame is high , the detection distance will be increased
- On board, digital output interface can be directly connected with the microcontroller IO
- Please keep a distance with flame, high temperature maybe burn out the sensor module
-
FY-12 MINI LCD DIG THERMOMETER HYGROMETER 1.5MTWIRE HYGT
₹399.00₹139.00Add to cartLCD display-Size: 48*28.6*15.2mm-LCD size: 35.7*16.8mm-Humidity measurement range 10% to 99%-Humidity display resolution 1%-Humidity sampling period 10 seconds (1 minute)-Humidity measurement accuracy ±5%-Rated voltage DC1.5v (2 AG13 button batteries, not included)-Temperature measurement: -50 to 70 degrees Celsius-Temperature measurement accuracy ± 1 degree (at normal temperature) -
GY-906 MLX90614 NON-TOUCH INFRARED TEMPERATURE SENSOR MODULE GY906
₹999.00₹799.00Add to cart- 4.5V~5V power supply Small size
- Factory calibrated in wide temperature range: -40€¦+125°C for sensor
- temperature and -70€¦+380°C for object temperature.
-
K TYPE THERMOCOUPLE O SENSOR MEASURE 1024 MAX6675
₹499.00₹249.00Add to cart- Model: MAX6675; Operating Voltage: 3.3~5.5VDC; Temperature Range: 0 to +1024°C; Cold Junction Compensation Range: -20 to +80°C
- Resolution: 0.25°C; Internal integrated cold junction compensation circuit;; Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.; K-type temperature probe; Simple SPI serial output temperature
- High impedance differential inputs.; Thermocouple break detection.; 2000V of ESD signal
- Packaged by:- Shari Technologies Pvt. Ltd.; Address:- 09, CK Nagar, AECS layout, Hose Road, Bangalore-560100
-
LM35D Analog Temperature Sensor Module + Cable LM35D
₹249.00₹129.00Add to cart- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
-
LM35DZ ANALOG TEMPERATURE SENSOR LM35DZ
₹199.00₹99.00Add to cart- Sensor type: temperature sensor
- Kind of temperature sensor: analog, with voltage output
- Calibrated directly in: °Celsius (Centigrade)
- Temperature measuring range: 0…100°C
- Scale factor: Linear 10.0 mV/°C
- Case: TO92
-
STC-1000 TEMPERATURE CONTROLLER 220VAC S1000A
₹499.00₹299.00Add to cart- Temperature measuring range: -50 – 99°C.
- Resolution : 0.1°C.
- Accuracy : ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power supply: 220VAC±10%, 50/60Hz
- .Power consumption: ≤3W.
- Sensor: NTC sensor (1PC).
- Relay contact capacity : Cool 10A/250VAC;Heat 10A/250VAC.
- Ambient temperature : 0 – 60°C.
- Storage temperature : -30 – 75°C.
- Relative humidity : 20% – 85% (No condensate).
- Front panel size : 75(L) x 34.5(W)(mm)
- Mounting size: 71(L) x 29(W)mm.
- sensor length: 1m (include the probe).
- Product size75(L) x 34.5(W) x 85(D)mm
-
STC-3028 220VAC TEMPERATURE & HUMIDITY CONTROLLER 220VAC S3028A
₹1,999.00₹799.00Add to cart- Temperature Control Range: -20 ° C ~ 80 ° C
- Screen Display: Dual Screen Dual Display
- Machine Power Consumption: Less Than 3W
- Temperature Measurement Accuracy: 1° C, 0.1%RH
- Resolution: 0.1 ° C
- Sensor: Integrated sensor
- Ambient Temperature: 0~60°C
- Relative Humidity: 0%~100% (no condensation)
- Machine Size: Approx. 75 x 34.5 x 85mm / 3 x 1.4 x 3.3in
- Installation Opening: Approx. 71 x 29mm / 2.8 x 1.1i
-
STC-3028 TEMPERATURE & HUMIDITY CONTROLLER 12VDC S3028
₹1,999.00₹699.00Add to cart- Temperature Control Range: -20 ° C ~ 80 ° C
- Screen Display: Dual Screen Dual Display
- Machine Power Consumption: Less Than 3W
- Temperature Measurement Accuracy: 1° C, 0.1%RH
- Resolution: 0.1 ° C
- Sensor: Integrated sensor
- Ambient Temperature: 0~60°C
- Relative Humidity: 0%~100% (no condensation)
- Machine Size: Approx. 75 x 34.5 x 85mm / 3 x 1.4 x 3.3in
- Installation Opening: Approx. 71 x 29mm / 2.8 x 1.1i
-
TEMPERATURE CONTROLLER MODULE SENSOR DC 12V W1219
₹399.00₹110.00Read more- Control Range: -50~110 °C
- Control Precision: 0.1 °C
- Measuring Input: NTC10K waterproof sensor L=0.5m.
- High-Temperature Alarm: -49~110 °C
- Input Voltage: DC 12V
- Output Type: Relay output 10A (max)
- Return Difference Setting: 0.1~30 °C
- Delay Starting: 0-10min
- Temperature Calibration: -10~10 °C
-
Thermal Thermistor Temperature Sensor AB076
₹199.00₹89.00Add to cart- NTC thermistor sensor, good sensitivity
- The comparator output signal is more than 15mA.
- Possibel to adjust the temperature distribution position detection threshold
- Working voltage: 3.3V-5V
- Output form: DO digital switching outputs (0 and 1) and AO analog voltage output
- Fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- uses a wide voltage comparator LM393
-
W1209 DC 12V TEMPERATURE CONTROLLER MODULE W1209
₹199.00₹139.00Add to cart- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
-
XH-M452 HIGH PRECISION DC12V 10A M452
₹699.00₹549.00Add to cart- Model Number:XH-M452 power supply :DC 12V Temperature measurement range:-40~120℃ Humidity range：0~100%RH Control precision：0.1℃ 0.1%RH Test probe Integrated sensor output:10A delay Size:65*55*28mm
- et the start temperature: Long press the + key, start the flashing temperature, set start temperature by + / – key set Stop temperature: long press – button, stop flashing temperature, set stop temperature by + / – key
- New 4 wire Sensor is more precise
-
XM-18D TEMPERATURE & HUMIDITY CONTROLLER XM18D
₹3,999.00₹2,699.00Add to cart- Temperature display range: 0~40.5℃
- Temperature measurement precision: ±0.1℃
- Humidity display range: 0~99%RH
- Control release precision: ±3%RH
- Output lines: 6 lines (primary heating, auxiliary heating, exhaust (air exchange), turning left, turning right, humidifying)
- Output current: primary and auxiliary heating 30A, other output 10A
- .Egg turning times: maximum 999 times
- Egg turning cycle: 0~999 minutes (default 90 minutes)
- Egg turning period: 0~999 seconds (default 180 seconds)
- Air exchange cycle: 0~999 minutes (default 120 minutes)
- Air exchange period: 0~999 seconds (default 15 seconds)
- Length of measuring line: about 2 meters
-
ZL-7918A TEMPERATURE & HUMIDITY CONTROLLER Z7918
₹2,999.00₹2,199.00Add to cart- Safe and reliable, easy to operate, wide range of applications.
- It can be applied to temperature and humidity control of poultry egg incubators, mushroom cultivation, artificial climate chambers, warehouses and other occasions.
- Main functions: lighting control, auxiliary heating, temperature control, humidity control, egg turning control, timing ventilation control, alarm control, temperature and humidity calibration, hatching days display.
- High accuracy, digital display, easy to store, improving work efficiency, is an indispensable controller for home and industrial use.
