Showing 1426–1450 of 2429 results
-
LI-PO BATTERY CAPACITY INDICATOR MODULE DB1S
₹149.00₹99.00Add to cartThis compact module displays total and individual cell voltage with an optional low-voltage alarm—perfect for drones, RC vehicles, and DIY battery packs.
-
Li-po Battery Charger | Battery Balancer Charger 7.4-11.1V RC Pro Compact Charger B3AC
₹999.00₹499.00Add to cart- This is a simple and compact LiPoly balance charger for 2~3s batteries. It features built in JST-XH balance plug ports and 3 LEDs to indicate charge status.
- Comes with Inbuilt Power Supply. So you can straightaway plug it into the wall outlet. It’s an ideal charger to charge your LiPo Packs.
- Simple, reliable and safe to use Built in power supply 100~240V Compatible Automatic charging start and stop
-
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
₹1,299.00₹499.00Add to cart- Microcontroller: ATmega328P
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
-
Linear Hall Magnetic Sensor AB008
₹120.00₹59.00Add to cart- S49E hall sensor
- Features wide-range voltage comparator LM393
- Signal output indicator
- Analog / Digital output
-
Liquid pH Value Detection Sensor Module with PROBE (PHSENS+PHPROB)
₹1,499.00₹1,299.00Add to cart- PH range: 0-14 PH
- Temperature range: 0-60℃
- Zero-point: 7 ± 0.5PH
- Alkali Error: 0.2PH
- Theoretical Percentage Slope: ≧98.5%
- Internal Resistance: ≦250MΩ
- Response Time: ≦1min
-
Liquified Isobutane LPG Propane Gas Sensor Module MQ6
₹199.00₹139.00Add to cart- High Sensitivity to LPG, iso-butane, propane
- Small sensitivity to alcohol, smoke
- Good sensitivity to Combustible gas in wide range
- High sensitivity to Propane, Butane, LPG and also response to Natural gas
- Long life and low cost
- Simple drive circuit
-
Liquified Methane Gas Sensor Module MQ5
₹399.00₹199.00Add to cart- This is a very easy to use low cost semiconductor Gas sensor Module with analog and digital output. This module uses MQ5 gas sensor as a gas sensing element. It requires no external components just plug in Vcc & ground pins and you are ready to go.
- For Digital output the threshold value can be easily set by an on-board potentiometer. Using this module you can easily interface MQ5 gas Sensor to any Microcontroller, Arduino or even Raspberry Pi.
- This Gas Sensor module is sensitive to LPG, natural Gas & Town Gas. it is also small sensitivity to alcohol & smoke.
-
LM200-10B36 SMPS – 36V 5.9A – 212.4W AC/DC Enclosed Switching Single Output Power Supply
₹3,099.00₹2,599.00Add to cart- Enclosed AC/DC Power Supply
- Efficiency: 89%
- Output Voltage: 32.4-39.6VDC
- Input Voltage: 90 – 264VAC or 240 – 373VDC
-
LM2596 2A Buck Step-down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter LM2596D
₹249.00₹149.00Add to cart- Input Voltage Range: Supports 4V to 40V DC input for flexibility in various power sources.
- Adjustable Output Voltage: Provides an output range of 1.3V to 37V DC, adjustable via a potentiometer.
- Output Current (Max): Delivers up to 2A of continuous output current, ideal for powering medium-power devices.
- LED Voltmeter Display: Integrated LED voltmeter shows real-time output voltage for easy monitoring.
- High Efficiency: Up to 90% efficiency, reducing energy loss and heat generation during operation.
- Overload Protection: Built-in overcurrent, overvoltage, and short-circuit protection to safeguard your devices.
- Compact Size: Small and lightweight design (51mm x 25mm x 17mm), perfect for space-constrained projects.
- Heat Dissipation: Natural convection cooling with no need for a fan, ensuring safe operation even under load.
- Wide Application: Suitable for powering Arduino, LED strips, battery-powered devices, and other low-voltage electronics.
- Versatile Mounting: Features screw terminals for easy connection of input and output wires.
-
LM2596S DC-DC Stepdown Power Supply Module 3A LM2596
₹199.00₹99.00Add to cart- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature: Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
-
LM35D Analog Temperature Sensor Module + Cable LM35D
₹249.00₹129.00Add to cart- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
-
LM35DZ ANALOG TEMPERATURE SENSOR LM35DZ
₹199.00₹99.00Add to cart- Sensor type: temperature sensor
- Kind of temperature sensor: analog, with voltage output
- Calibrated directly in: °Celsius (Centigrade)
- Temperature measuring range: 0…100°C
- Scale factor: Linear 10.0 mV/°C
- Case: TO92
-
LM3914 Logarithmic LED dot or bar Display Driver 18 Pin IC
₹99.00₹25.00Add to cart-
Analog controlled LED Driver IC
-
Number of controllable LEDs : 10
-
Operating voltage : 3V to 18V
-
Input analog voltage range : 1.2V to 12V
-
LED sink current : 2mA to 30mA (programmable)
-
Both Dot and Bar display mode available
-
-
LNB Holder Bracket Clamp Mount for Dish TV Antenna LNBF LNB Mounting Bracket(Pack of 2)
₹99.00₹49.00Add to cart- LNB Holder Bracket Clamp Especially for Dish TV.
- Can be used for antenna with 20mm LNBF Arm.
- LNB Mount Holder for 20mmX 10mm LNB.
- High Quality Material Used.
-
LOAD CELL 50KG LOAD50
₹899.00₹399.00Add to cart- Capacity (Kg): 50.
- Output Sensitivity (mv/v): 1.0±0.1.
- Nonlinearity (%FS): 0.03.
- Repeatability (%FS): 0.03.
- Input Resistance (Ω): 1000.
- Insulation Resistance (MΩ): ≥5000.
-
Long Rocker switch 15A 250V 3PIN Green led (Pack of 2) LRS78
₹99.00₹49.00Add to cart- Rating: Max 15A at 250VAC
- Switching Mode: ON-OFF
- Structure: SPDT
- Material: Plastic and Metal
- Colour: Green-Black
-
Longer Version of 4WD Double Layer Smart Car Chassis
₹799.00₹649.00Add to cart- Simple in Assembling/Disassembling
- Strong Components
- Transparent Car Chassis
- Attractive Design
-
LORA SX1278 0.96° OLED BLE WIFI ESP KIT 32 ESP32L
₹2,799.00₹2,299.00Add to cart- LoRa SX1278 Communication: Long-range, low-power communication module for IoT applications (up to 15 km range).
- ESP32 Microcontroller: Dual-core 240 MHz processor with built-in Wi-Fi (802.11 b/g/n) and Bluetooth Low Energy (BLE) support.
- 0.96″ OLED Display: High-resolution (128×64) display for real-time status and sensor data visualization.
- Wi-Fi Connectivity: Seamlessly connects to local networks and cloud platforms for remote monitoring.
- Bluetooth Low Energy (BLE): Ideal for short-range wireless communication with low power consumption.
- Low Power Consumption: Designed for extended battery life, perfect for portable IoT projects.
- GPIO Pins: Multiple input/output pins for interfacing with sensors, actuators, and external devices.
- PWM & ADC Support: Pulse-width modulation and analog-to-digital conversion for various control and sensor tasks.
- Wide Frequency Range: Supports 433 MHz, 868 MHz, and 915 MHz frequencies (region-dependent).
- Open-source Firmware: Compatible with Arduino IDE, ESP-IDF, and other development environments for easy programming.
- Flexible Interface Options: Supports I2C, SPI, UART, ADC, DAC, PWM, and GPIO for diverse project needs.
- Compact Design: Small and lightweight, suitable for embedded IoT projects with limited space.
- Wide Operating Temperature: Functional in a broad temperature range from -40°C to +85°C.
- Ideal for IoT Projects: Excellent for smart homes, industrial automation, health monitoring, and agricultural applications.
-
Love Kush Semi Solar LED Light with 12-Hour Backup – 3.7V 2600mAh Battery.
₹999.00₹499.00Add to cartKey Features:
- High-Capacity 2600mAh Battery: Powered by a powerful 3.7V 2600mAh battery that ensures up to 12 hours of uninterrupted light after a full charge, perfect for overnight illumination.
- Solar-Powered Energy Efficiency: The semi-solar design charges during the day, harnessing the sun’s energy to power the light at night, reducing electricity costs and promoting sustainability.
- Long-Lasting LED Illumination: Equipped with high-efficiency LED lights, providing bright, consistent lighting that lasts for hours without the need for frequent replacements.
- 12-Hour Backup: Enjoy reliable lighting all night long, with the ability to last up to 12 hours on a full charge, making it ideal for outdoor settings that need extended illumination.
- Weather-Resistant & Durable: Made from weatherproof materials, this solar LED light is built to endure outdoor conditions such as rain, heat, and wind, ensuring reliable performance year-round.
- Eco-Friendly and Cost-Effective: Solar energy powers the light, eliminating the need for wiring and minimizing electricity use, making it an environmentally friendly choice for outdoor lighting.
- Easy to Install: Quick and simple setup with no wiring required. Ideal for garden beds, paths, fences, yards, or any other outdoor area that needs reliable and attractive lighting.
- Versatile Use: Perfect for various outdoor spaces like gardens, walkways, patios, and driveways, providing both security and ambiance.
-
LR1130 Battery Cell Batteries
BATTERY & CELL STORE, CELL & BATTERIES, LI-ION BATTERY (Lithium i-on), NON-RECHARGEABLE BATTERY & CELL₹999.00₹995.00Add to cart- MODAL NUMBER BATTERY – LR 1130 / AG10 / 189 /G10A – Voltage: 1.5 V Alkaline Button Cell Battery
- Digital Watches, Camera, Toys, Diya Light Candle, Calculator, Clocks
-
LR41 Battery 1.5V Coin Battery
BATTERY & CELL STORE, CELL & BATTERIES, LI-ION BATTERY (Lithium i-on), NON-RECHARGEABLE BATTERY & CELL₹79.00Add to cart- AG3 LR41 SR41 192 384 392 LR736 L736 watches button cell batteries.
- Capacity : 35mAhShelf Life: 2 years (not printed on battery)
-
LRS-150-36 Mean Well SMPS – 36V 4.3A – 154.8W Metal Power Supply
₹2,099.00₹1,899.00Add to cart- Output Voltage 36V
- Type Enclosed Type
- Approx. Wattage 155W
- Features Standard
- Series LRS(Reliable)
- Mechanical Form Enclosed
- IP Level Non-Waterproof
- Input Voltage 115V/230V by switch
-
LRS-200-5 Mean Well SMPS – 5V 40A – 200W Metal Power Supply
₹3,999.00₹2,599.00Add to cart- Output Voltage 5V
- Type Enclosed Type
- Approx. Wattage 200W
- Features Standard
- Series LRS(Reliable)
- Mechanical Form Enclosed
- Warranty 3 Years Warranty
- IP Level Non-Waterproof
- Input Voltage 115V/230V by switch
-
LRS-350-36 Mean Well SMPS – 36V 9.7A – 349.2W Metal Power Supply
₹3,499.00₹2,999.00Add to cart- Output Voltage 36V
- Type Enclosed Type
- Approx. Wattage 349W
- Features Standard
- Series LRS(Reliable)
- Mechanical Form Enclosed
- IP Level Non-Waterproof
- Input Voltage 115V/230V by switch
-
LRS-50-24 Mean Well SMPS – 24V 2.2A – 52.8W Metal Power Supply
₹1,499.00₹1,149.00Add to cart- Output Voltage: 24V DC
- Maximum Output Current: 2.2A
- Total Output Power: 52.8W
- Input Voltage: 90-264V AC, 47-63Hz (wide input range)
- Efficiency: Up to 89% for optimal energy usage
- Protection: Overload, short circuit, and over-voltage protection built-in
- Cooling: Passive cooling (fanless, silent operation)
- Durable Metal Housing: Robust metal case for enhanced durability and protection
- Compact Size: 91 x 55 x 36 mm (approx.)
- Weight: 0.24 kg (approx.)
- Operating Temperature Range: -30°C to +70°C
- Certifications: UL, CE, CB, and more for international safety compliance
- Application: Ideal for LED lighting, industrial automation, communication devices, and more
- Waterproof: Non-waterproof, suitable for dry, indoor environments
