Showing 1–24 of 34 results
-
5V STEP UP POWER MODULE LITHIUM BATTERY C TYP USBCMC
₹199.00₹75.00- Battery overcurrent protection current: 3A
- The board size: about 2.5 * 1.65 CM
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Battery over-discharge protection voltage: 2.5V
- 1PCS Type-C USB TP4056 Lithium Battery Charger Module
-
18650 BATTERY CHARGER FOR “MEGA PHONE” CH18650
₹199.00₹159.00- Input: AC 100-240V/ 47-63HZ
- Output: DC 3.7V/ 500mA
- Termination voltage: 4.2V+-1%
- Plugs: EU
- Home Travel Wall AC Multifunctional Universal Battery Charger
- Automatically stops when charging is complete
- Red/Orange light when charging, full of turns green, auto stop charging
- Designed to charge your batteries quickly and safely
- Wide range charging voltage
-
1A Li-Ion Lithium Battery charging Module with Current Protection – Micro USB TP4056
₹199.00₹99.00- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
-
1A LIPO BATTERY CHRG BOARD WITH IC C TYPE TP4056C
₹99.00₹49.00- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
-
1S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
₹199.00₹159.00- The intelligent power display panel
- Static power consumption 2~3 mA
- Colour Display
- Wide Variety of application
-
1S-8S Voltage Checker with Buzzer Alarm
₹349.00₹299.00- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
-
3.6V/4.2V 1A LITHIUM BATTERY CHARGER MODULE TP5000
₹299.00₹149.00- Single Battery Charger Module
- Programable Charge Current Form 0.1A to 2A
- Programable Recharge Current Form 10% to 100%
- Based on Tp5000 Battery Charger IC
-
3.7V 9V 5V 2A Multimeter Modified 18650 Lithium Battery Charging, Boosting And Discharging Adjustable Module
₹99.00₹79.00- Input voltage 4.5-8V
- Continuously adjustable output voltage 4.3-27V
- (Above 4.3V and below 27V, any voltage can be output, you can adjust it yourself
- Turn up the pressure counterclockwise)
- Charging voltage 4.2V Charging current Max 1A
-
3.7V-5V 2A 18650 BATTERY BOOST & CHRG MODULE TP4056B
₹99.00₹69.00- 1) High-quality integrated circuits.
- 2) Exquisite detail and long service life.
- 3) Module TP4056 DIY kit parts.
- 4) Can be used for multimeter, converted to lithium-battery charging.
-
3S 18650 Li-Po Lithium Battery Capacity Indicator Module DB1S
₹149.00₹99.00- Colour Display
- Reverse Connection Protection
- Wide Variety of application
-
3USB5V 1A MB. POWERBANK LI BATTERY CHRG BOARD AA315
₹199.00₹149.00- 3 USB 5V 1A Mobile Power Bank Charger Controller Module Step Up Boost Power Module Lithium Battery Charging Board LED
- Apply Battery Type: 18650 battery(not include)
- Output Voltage: 5V 2.1A Input Voltage: 5V 1A
- Instructions: Level 4 Capacity indicator Lighting: with LED lights
- Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)
-
4.2V 8.4V SINGLE DOUBE LI-ION BATTERY 2A BOARD TP5100
₹199.00₹99.00- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100%
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, undervoltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
-
5V 1A SUPER CURRENT WIRELESS CHARGING MODULE NA459E
₹449.00₹349.00- Product Name:5W Wireless Charger
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-20℃~85℃
- Storage Temperature:-50℃~125℃
- Work Humidity:5%~95%RH
- Module Size:41*19*18mm
- Transmit Coil Size:50*50*5mm
-
5V 1A WIRELESS POWER SUPPLY TX RX CHRG MODULE NA459C
₹799.00₹499.00- The 5V 1A large current wireless charger module transmitter receiver charging coil Module is mainly used in electronics products for charging wirelessly.
- Input voltage: 9 ~ 12V
- Maximum load current: 1.3A
- Receives the output voltage and current: 5V / 1A
- Transmitting coil size: diameter 43mm, thickness 2.3mm
- Transmitter module size(LxWxH): 18×8.5mmx15mm
- Receiver Module size(LxWxH): 10x25x3mm
- Receiving coil size: diameter 43mm, thickness 1.2mm
- Receive the best distance: 3 ~ 6mm
-
5V 2A SUPER CURRENT WIRELESS CHRG MODULE NA459
₹999.00₹699.00- Input voltage: 9 -12V
- Maximum load current: 1.1A
- The max output voltage and current of receive: 5V / 2A, 12V / 700mA
- Transmitting coil size: diameter 43mm, thickness 2.3mm
- Transmitter module size: 18mmx8.5mmx15mm
-
5V Boost Step Up Lithium LiPo Battery Charging LED Display USB Protection Board For Diy Charger C Type
₹2,299.00₹1,999.00- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management .
- Intelligent temperature control and overtemperature protection.
-
5V STEP UP POWER MODULE LITHIUM BATTERY USBCM
₹99.00₹49.00- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Present 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
-
5V Step-Up Power Module Lithium Battery Charging Protection Board
₹79.00₹49.00- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
-
B3 AC COMPACT BALANCE CHARGER FOR 2S-3S LIPO BMSB3
₹499.00₹399.00- Input Voltage(AC): 100- 240v
- Battery Type: LiPo (Lithium Polymer)
- Balance Charge Current: 840mA
- Output Current: 3 x 800mA
- Power Plug: EU Plug or US Plug
- Dimensions: 92*59*35.5mm
-
B6 AC BLUE 50W WITH T PLUG EU PLUG BMSB6A
₹6,999.00₹5,999.00- Time limit function
- Input voltage monitoring (Protects car batteries at the field)
- Data storage (5 pack memory)
- Battery break in and cycling.
-
CN3791 12V MPPT Solar Charger Module SC3791
₹449.00₹399.00- Maximum Power Point Tracking (MPPT) Solar Charger Module
- 2-Pin JST Connectors for Solar Panel and Battery Connection
- PWM Switching Frequency of 300KHz
- Maximum Charging Current of 2A