Showing 251–275 of 404 results
-
MPU9250 9-Axis Attitude Gyro Accelerometer Module
₹999.00₹699.00Add to cart- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
- All sensors are connected to the I2C bus.
- Build-in the Logic level converter for I2C.
- Power indicator LED.
- Using Immersion Gold PCB, machine welding process to ensure quality.
-
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ8
₹399.00₹159.00Add to cart- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
-
MRP121 BREAKOUT V12 CAPACITIVE TOUCH SENSOR MPR121
₹499.00₹99.00Add to cart- 12-channel capacitive touch sensor breakout board, starring the MPR121
- Can handle up to 12 individual touch pads
- MPR121 has support for only I2C
- A 3V regulator and I2C level shifting
- An LED onto the IRQ line so it will blink when touches are detected
- Dimensions: 33mm x 19mm x 2mm / 1.3″ x .8″ x .1″
- Weight: 2.2g
-
MT8870 DTMF Audio/Speech Decoding Telephone Module MT8870
₹149.00₹99.00Add to cart- Working voltage: 5V
- Power Consumption: 500MW(MAX)r: 500 MW (MAX)
- On-board voice input interface
- On-board LED, it is very convenient to check the output state.
- Onboard 5 x LED indicators for easy viewing output state
- Operating Temperature: -40-+85 °C
- IO Drive: Current Maximum 10mA.
- PCB Size : 25.4×25.4MM
-
Natural Gas Methane (CNG) Detector Sensor Module MQ4
₹199.00₹95.00Add to cart- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
-
Natural Gas Methane Gas Sensor Module MQ4
₹299.00₹159.00Add to cart- This is a very easy to use low cost semiconductor Gas sensor Module with analog and digital output. This module uses MQ4 Methane gas sensor as a gas sensing element.
- It requires no external components just plug in Vac & ground pins and you are ready to go. For Digital output the threshold value can be easily set by an on-board potentiometer.
- Using this module you can easily interface MQ4 Methane (CNG) gas Sensor to any Microcontroller, Arduino or even Raspberry Pi.
- .Since this Gas Sensor module is sensitive to Methane it is also small sensitivity to alcohol & smoke.
-
NE555 DELAY MONOSTABLE SWITCH MODULE 5V NA390B
₹199.00₹115.00Add to cart- Brand new and professional high quality delay switch module With power indicator LED and trigger indication LED
- Output is voltage free & can be connected up to 10A load of any voltage rating Chrono-potentiometer regulation time delay, adjustable from 0 to 10 seconds by default Useful for applications in equipment-delay to prevent sudden high current which can burn components and devices
- Module based on: NE555 chip Delay module: delay connect module Input voltage: DC 5V Control voltage: AC 0~250V / max. 10A, DC 0~30V / max. 10A, the operating voltage: 5volts DC Max load: 2200W
-
NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module
₹149.00₹99.00Add to cart- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
- Precision Pulse Generation / Timing.
- Monostable Operation.
- Standby no power consumption
- Excellent temperature stability of 0.005%/°C
-
NE555 Frequency Duty Adjustable Pulse Generator Module
₹199.00₹99.00Add to cart- Size: 31mm * 22mm;
- Main chip: NE555;
- Input Voltage: 5V-15VDC. when power supply is 5V , the output current can be 15MA around;when 12V power supply, the output current can 35MA around;
- Input current: >=100MA
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
-
NE555 PULSE FREQUENCY DUTY CYCLE ADJUSTABLE MODULE NE555
₹99.00₹49.00Add to cart- Main chip: Ne555
- Input voltage: 5v-15vdc
- Power supply is 5v
- Output current can be 15ma around
- Input current: 100ma
-
NE555C Frequency Adjustable Pulse Square Wave Signal Generator Module
₹189.00₹99.00Add to cart- Color: Blue
- Working voltage: 5-12V
- Minimum 50% duty cycle, 3.7 Hz & Maximum 98% duty cycle, 1.3KHz
- 100% Brand new and high quality!
- A single channel output, the output duty cycle square wave is about fifty percent.
- Onboard adjustable resistance, resistance can be controlled to adjust the output frequency.
- Best choice for yourself or your friend. You will not be disappointed!
-
Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera (RA021)
₹499.00₹199.00Add to cart- Operating Voltage: 5V
- Operating current: 600 mA (max.)
- Power: 3W
- Small size and Lightweight module.
- Easy to use.
-
NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator
₹299.00₹149.00Add to cart- It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc.
- NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module
- NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers
- RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached “nRF24L01+” module.
- The packing list includes: NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module; SMA Antenna 2.4G 1100m; NRF24L01+ Breakout Adapter
-
NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna 1100 METERS NRF24A
₹499.00₹199.00Add to cart- The nRF24L01+ is a 2.4GHz ISM band transceiver Compatible with arduino IDE.
- The module has 5V tolerant inputs which allows for direct connection of SPI pins to the compatible with ArduinoIDE.
- Range: 800+ meters line of sight, Weight: 13.28 g (0.468 oz).
- Auto-acknowledge and auto-retransmit abilities.
- In the RF part of a large number of optimized matching debugging, making the highest transmission efficiency, the smallest harmonic, making NRF24L01P + PA + LNA wireless module to external radio equipment to achieve the lowest radio frequency interference, but also not susceptible to interference from other devices, extremely large Improve the stability of the work.
-
NRF24L01+WIRELESS MODULE 2.4 GHZ NRF24
₹199.00₹139.00Add to cart- I/O can accept 5v level of input
- Low Working Voltage: 1.9 ~ 3.6 V
- Wireless Rate: 1 or 2 MBPS
- SPI Interface Rate: 0 ~ 8MBPS
- Transmit Power: +0dB
- 125 optional channels work
- Transmission distance up to 100 meters in outdoor open occasions
-
OV7670 VGA CMOS Camera Image Sensor Module OV7670
₹399.00₹199.00Add to cart- Single power source: 3.3V, onboard regulator
- Standard 0.1 inch (2.54mm) pin pitch header connector
- High sensitivity suitable for illumination applications
- Low voltage suitable for embedded applications
- Standard SCCB interface compatible with I2C interface
- 50/60Hz automatic detection
- Photosensitive array: 640×480 pixel
- IO Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V)
- Power operation: 60mW/15fpsVGAYUV
- Sleep: 20μA
- Temperature Operating: -30 ℃ to 70 ℃
- Stable: 0 ℃ to 50 ℃
- Output Formats (8): YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data
- Optical size: 1/6 “
- FOV: 25 °
- Maximum Zhen rate: 30fps VGA
- Sensitivity: 1.3V / (Lux-sec)
- SNR: 46 dB
- Dynamic range: 52 dB
- View Mode: Progressive
- Electronic Exposure: 1 line to 510 line
- Pixel Size: 3.6μm x 3.6μm
- Dark current: 12 mV / s at 60 ℃
-
PCA9685 – 16 Channel 12-Bit PWM Servo Motor Driver I2C Module For Raspberry PI
₹499.00₹429.00Add to cart- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
- 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to each other on 0.1″ header
- “Chain-able” design
-
PEACEFIAR PZEM-004T AC ELEC ENERGY POWER MONITER P004T
₹1,999.00₹799.00Add to cart- Electrical parameter measurement function (voltage, current, active power, power).
- The power button clear function.
- Power-down data storage function (cumulative power down before saving).
- PC PC display function (display voltage, current, active power, power).
- Model: PZEM-004T Accuracy: 1
- Operating Voltage (VDC): 80-260V (AC Test Voltage: 80-260V (AC)
-
PELTIER WATER COOLING PLATE 40×120×12MM WC12706L
₹399.00₹299.00Add to cart- Heavy Aluminium build
- Internal flow channel extrusion forming
- Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling
-
PELTIER WATER COOLING PLATE 40×40×12MM WC12706
₹299.00₹179.00Add to cart- Internal Flow Channel Extrusion Forming, Brazing Parts Into a Whole, Leak Rate of Less Than 5X10-6 Mbar.l/s Parts.
- Suitable For Peltier Cooling, Cooling Graphics GPU, Motherboard Northbridge Southbridge CPU, Graphics. Semiconductor Cooling Piece, Industrial Cooling, etc.
- Processing: Vacuum Aluminium Brazing.
- Surface Treatment: Silver Oxidation.
-
PH SENSOR PROBE PHPROB
₹999.00₹549.00Add to cart- PH range: 0-14 PH
- Temperature range: 0-60℃
- Zero-point: 7 ± 0.5PH
- Alkali Error: 0.2PH
- Theoretical Percentage Slope: ≧98.5%
- Internal Resistance: ≦250MΩ
- Response Time: ≦1min
-
PHOTO SENSITIVE RESISTANCE 5MM LDR (Pack of 5)
₹99.00₹49.00Add to cart- Epoxy encapsulation
- Good reliability
- Small size
- High sensitivity
- Fast response
- Good spectral characteristics
-
PHOTOELECTRIC COUNT SLOT SENSOR MODULE 5MM COUNTS
₹99.00₹49.00Add to cart- The width of the optical coupling slot: 5mm
- With a signal output indication.
- Single signal output
- The circuit board output switch!
- The output valid signal is low.
-
PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board
₹349.00₹299.00Add to cartThe ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation.
-
PICKIT3 Debugger Programmer Emulator Controller Development Board
₹2,999.00₹2,799.00Add to cart- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
