Showing 201–225 of 404 results
-
HLK-5M12 Hi-link 12V 5W – AC to DC Power Supply Module
₹399.00₹299.00Add to cart- Rated input voltage 100-240 VAc
- Input voltage range 90-264 VAc
- Maximum input current ≤0.2 A
- Input current surge ≤10 A
- maximum input voltage ≤270 VAc
- Enter slow start ≤50 mS
- Input Low Voltage Efficiency Vin=110VAc,Output full-load≥69 %
-
HLK-PM01 Hi-link – 5V 3W – AC to DC Power Supply Module
₹399.00₹199.00Add to cart- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
-
HLK-PM03 Hi-Link – 3.3V 3W – AC to DC Power Supply Module PM03
₹299.00₹199.00Add to cart- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
-
HLK-PM12 Hi-link 12V 3W – AC to DC Power Supply Module
₹399.00₹249.00Add to cart- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
-
Human / Metal Touch SENSOR AB009
₹199.00₹79.00Add to cart- Working Voltage: DC 5V
- Single Channel Signal Output
- Low-level output signal used for human body touch sensor alarm
- Adjustable sensitivity
- Easy installation
- Works with Arduino Boards
-
I2C 2-Channel 3.3V to 5V Bi-Directional Logic Level Converter LOG2
₹199.00₹69.00Add to cart- Mutual transform between 5V TTL and 3.3V TTL
- Two channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 4 pin contact pins
- Level Converter- 2 Channel Compatible with the bread plate, can be used directly put on the breadboard
- 2 Channel Module (great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, NXP Mbed
-
I2C 4CH 3.3V-5V BI-DIRECTIONAL LOGIC LEVEL CONVERTER LOG4
₹199.00₹69.00Add to cart- Voltage on Lx Side: 1.8V-5V
- Voltage on Hx Side: 2.8V-6V
- Power: 2.8V – 6V
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform.
-
ICSH044A BLACKBERRY TRACKBALL BREAKOUT BOARD AA204
₹599.00₹359.00Add to cart- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
-
IIC/I2C Serial Interface Adapter Module I2CM
₹199.00₹99.00Add to cart- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
-
Infrared Eye Blink Sensor with Goggles EYEBS
₹299.00₹199.00Add to cart- EYE BLINK indication by LED
- Instant output digital signal for directly Connecting to the microcontroller
- Compact Size
- Working Voltage +5V DC
- TTL output 5V or 0V
- use for digital Eye Blink monitor
- use for Vehicle Accident prevention.
- Suite for real-time driving applications.
- Onboard 3-pin header
-
Infrared IR Line 4-Channel Track Follower Sensor Module NA504
₹299.00₹149.00Add to cart- Working Voltage: 3.3V-5V DC
- Working Current: >1A
- Detection Distance: 2~60cm
- Detection Angle: 35°
- Big Board: 42*38*12mm
- Small Board: 25*12*12mm
- Mounting Hole Diameter: 3mm
-
INFRARED OBSTACLE AVOIDANCE TRACKING SENSOR MODULE AB072
₹199.00₹79.00Add to cart- It Can be used for 3-5V DC power supply modules. It has red power indicator.
- IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
- The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay
- It has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal).
- Obstacle sensing LED and Power LED
-
INFRARED OBSTACLE SENSOR MODULE FRQ & DIS ADJ AB488
₹199.00₹139.00Add to cart- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
-
INFRARED SENSOR MODULE SMART CAR KY-022 ARDUINO AB490
₹99.00₹49.00Add to cart- Obstacle Detection: Senses obstacles to prevent collisions, enhancing safety for robotic cars.
- Line Following Feature: Ideal for building line-following robots with reflective surface detection.
- Easy Integration: Compatible with Arduino and other microcontrollers for straightforward setup.
- Adjustable Sensitivity: Includes a potentiometer to fine-tune detection range as needed.
- Compact Size: Lightweight design facilitates easy integration into various robotic projects.
- LED Indicator: Provides visual feedback for obstacle detection, aiding in debugging.
- Operating Voltage: Works at 5V DC for efficient power consumption.
- Digital Output: Simplifies connection to microcontrollers for easy programming and control
-
INFRARED SENSOR MODULE SMART CAR KY-022 ARDUINO AB490
₹199.00₹79.00Add to cart- Dimension: 6.4 x 7.4 x 5.1mm
- Receiving angle: 90
- Working voltage: 2.7 ~ 5.5V
- Frequency: 37.9KHz
- Receiving range: 18m
-
ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker I1820
₹299.00₹199.00Add to cart- Working voltage: 3 ~ 5V
- Board size:54 x 38 mm
- ISD1820 Sound/Voice Board Recording
- 100% Brand new and high-quality Board
- ISD1820 chip with an Onboard microphone
-
K TYPE THERMOCOUPLE O SENSOR MEASURE 1024 MAX6675
₹499.00₹249.00Add to cart- Model: MAX6675; Operating Voltage: 3.3~5.5VDC; Temperature Range: 0 to +1024°C; Cold Junction Compensation Range: -20 to +80°C
- Resolution: 0.25°C; Internal integrated cold junction compensation circuit;; Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.; K-type temperature probe; Simple SPI serial output temperature
- High impedance differential inputs.; Thermocouple break detection.; 2000V of ESD signal
- Packaged by:- Shari Technologies Pvt. Ltd.; Address:- 09, CK Nagar, AECS layout, Hose Road, Bangalore-560100
-
KNOCK SENSOR MODULE KNOCK
₹99.00₹45.00Add to cart- Detect shocks with the spring and send a signal to Controller Board
- Operating voltage: 3.3V-5V
- Digital output
- Bolt holes for easy installation.
-
KY-039 Finger Detection Heart beat Measuring Sensor Module
₹199.00₹99.00Add to cart- Use IR LED and an optical transistor to detect pulsation in fingers
- Small and Compact module
- Easy to use.
-
L293D Dual H-Bridge Motor Driver IC DIP-16
₹99.00₹49.00Add to cart- Overtemperature Protection
- Logical “0” Input Voltage Up To 1.5 V (High Noise Immunity)
- Internal Clamp Diodes.
- Featuring Unit rode L293 and L293D
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
-
L293M MOTOR DRIVER MODULE MINI L293M
₹199.00₹99.00Add to cart- Dual H-Bridge Design: Controls two DC motors or one stepper motor with independent control.
- Compact Size: Miniature form factor for space-constrained projects.
- Wide Voltage Range: Operates between 4.5V and 16V, compatible with a variety of motors.
- High Current Output: Supports up to 600mA per motor channel, 1.2A peak.
- Bidirectional Motor Control: Enables both forward and reverse motor operation.
- Microcontroller Compatible: Works seamlessly with Arduino, Raspberry Pi, and other platforms.
- Thermal Protection: Built-in overheating protection for enhanced reliability.
- Ideal for DIY Projects: Perfect for robotics, automation, and other motor-driven applications.
-
L9110S DC STEPPER MOTOR DRIVER BOARD AA223 L9110
₹199.00₹99.00Add to cart- Dual Motor Control: Operates two DC motors or one stepper motor simultaneously.
- High Current Handling: Supports up to 800mA of continuous current per channel.
- Versatile Voltage Range: Compatible with motor voltages from 2.5V to 12V.
- Compact Design: Space-saving layout for easy integration into various projects.
- Simple Connectivity: Easy to connect to microcontrollers like Arduino and Raspberry Pi.
- Bidirectional Control: Enables forward and reverse operation of motors for enhanced functionality.
- Thermal Protection: Equipped with safety features to prevent overheating and short circuits.
- TTL Compatible: Works with 5V logic levels for straightforward operation.
- LED Indicators: Integrated LEDs provide real-time feedback on motor status.
- Ideal for Robotics: Perfect for robotics, automation, and DIY electronics applications.
-
Laser Diode Module – 5mW 650nm 5V Red LASERM
₹119.00₹49.00Add to cart- Voltage: 3.0-5V
- Output: red laser straightly(650nm)
- Driver: APC circuit
- Size: Φ 12.0 x35mm
- Line length: about 135 mm
- Transmit power: 58mW
- Operating Current: 40mA
- Operating temperature: -36 ~ 65◦C
- Pot size: 15 meters spot for φ10 mm ~ φ15
- Power lead length: 95mm
- Outer diameter: 6mm
-
LDR PHOTOSENSITIVE SENSOR MODULE AB075
₹99.00₹39.00Add to cart- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
Linear Hall Magnetic Sensor AB008
₹120.00₹59.00Add to cart- S49E hall sensor
- Features wide-range voltage comparator LM393
- Signal output indicator
- Analog / Digital output
